FMP 500 Expanded Graphite Packing
Typical Applications : Valves
Service Media & Conditions Used for Superheated Steam, Hydrocarbons, Non Oxidising Liquids & Gases, Hot Ash Dyes & Chemicals, Fuel Oil & Lub oil etc. Corrosion inhibitor for moving parts
Supply Data :
Size Range : 6 X 6 to 40 x 40 mm
Form : Square
Non Asbestos Gland Packing-Ferolite Gland Packing
Non-asbestos joint sheet At1600 series---the products made of asbestos are rejected step-by-step when people demanding more and more on the health and environment-protection.Expandable teflon and flexible graphite are used much more widely than ever in modern industry. Although they are gradually replace the asbestos gasket, they cannot do it completely because they have some defect. So the non-asbestos sheet become the best replacement of asbestos planking. The non-asbestos sheet which is made of aramid fiber, inorganic fiber, synthetic rubber etc under high temperature and high pressure. The nonasbestos material is widely used in the joint part of tubing, valve, heat exchanger, pressure container in refinery, chemical plant, power plant, boatyard, pipework. 1volume/polybag
Supplier: Compressor spares, all types of clutches (custom made also we can offer), non-asbestos gland packings, industrial valves
Supplier: Make non asbestos & asbestos gasket jointing sheets & packing, asbestos to non asbestos gasket jointing sheets, gland packing, rope, cloth, asbestos jointing sheets, gland packing, rope, cloth seal off air, water, steam, oils, gases, solvents, hydrocarbons, acids, alkalis
FMP 211 Gland Packing Graphited & LuBricated Bar Ratating 40 Bar Oscillating 100 Bar Fixed 250 Temperature *C --150 Temperature *C + 350 Density g/cn 1.67
Description 20622A Gland Assembly for Mission 4x3x13 Mud Pumps. offers a complete spare parts line of centrifugal sand pumps to suit for all kinds of drilling sand pump application. Size ranges from 3x2x13, 4x3x13, 5x4x14, 6x5x11,6x5x14, 8x6x11,8x6x14, 10x8x14, 12x10x23 to 14x12x22b.
Gasket sheets 1500*4500, 1500*4000,1500*3000,1500*2000,1500*1500
Supplier: Asbestos, non-asbestos & CAF jointing sheets, gland packing, asbestos yarn, cloth & webbing tape, PTFE / teflon & PP products, non-asbestos ceramic rope, rubber sheet, neoprene rubber sheets, mat
A gasket is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage from or into the joined objects while under compression. Metallic Gaskets: \"Metallic Gaskets\" are gaskets that are fabricated from one or a combination of metals to the desired shape and size. Common metallic gaskets are Spiral Wound Gaskets, Double Jacketed Metal Gaskets, Solid Metal Gaskets, Corrugated Metal Gaskets, Ring Type Joint Gasket used for heat exchangers, compressors, condensers, pumps, valves and turbines. These metallic gaskets are suitable for high pressure & temperature applications and require high bolt load to seal. Types: � Spiral Wound, Double Jacketed, Solid Metal gaskets, Corrugated Metal Jacketed Gaskets, Ring type joint Gaskets Non Metallic Gaskets: \"Non Metallic Gaskets\" or \"Soft Gaskets\" are gaskets that are easily compressed under a low bolt load. They are composite sheet materials that are suitable for a wide range of general as well as corrosive chemical applications. They are easily available either in sheet form or as gaskets that are cut accurately to any reasonable shape and size. Non metallic gaskets are usually manufactured from materials like arimid fiber, glass fiber, elastomers, teflon (PTFE), compressed asbestos fibre (CAF), flexible graphite etc. Types are: Non Asbestos, Asbestos, Flexible Graphite, PTFE, Viton, Silicone Rubber, Neoprene and Flange Gaskets.
