HomeSure Tile Adhesive is cement based general tile adhesive. It contains highest grade of graded sand,
cement, selected fillers, polymers and chemical additives to give it unique properties.
We offer Tile Adhesive in 3 different variants:
Silver Star: General purpose tile adhesive for ceramic tile, tile on tile for wall and flooring application.
Gold Star: Higher grade of water resistant tile adhesive suitable for Vitrified, Marbonite wall and
flooring application.
Platinum Star: White cement based tile adhesive for fixing Marble, Granite, Glass tiles etc. for wall and
flooring application.
Standards :
Complies the specification of ISI 5477: 2004
Silver Star and Gold Star : Type I
Platinum Star Type II
Features :
- Excellent bonding to the
base plaster/concrete even
at a thickness of 2mm
- No need for hacking
- Water resistant
- Can be used on new as well
as old walls and floors
Advantages :
- Good workability
- Ease of use at site
- Suitable for interior
- Suitable for exterior along
with additional metal anchoring
- Consistent work quality
Benefits :
- Durability
- Saves time and Increase productivity
- Cost effective
- No curing required
Surface Preparation :
- Clean loose particles, dirt, grease and traces of foreign material from the surface, if necessary by using
wire brush / sand paper or by chipping.
- For loose plaster areas, remove the defective material and replaster the area with Ready-Mix Plaster.
- For floors / walls, which are not even, replaster with Ready-Mix Plaster to make them even.
- New Construction : Before tiling the new construction should be cured for 6 weeks.
- Old Construction : Remove all loose portions and make good with sand cement slurry bonding coat prior
to apply HomeSure Tile Adhesive.
Mixing :
- Take clean water as per the water demand in a clean bucket. Add 1 kg HomeSure Tile Adhesive.
Stir continuously by hand to obtain a homogenous lump-free paste. Tile Adhesive should be creamy
like butter.
- Allow the resultant paste to stand for about 5 minutes for the additives to dissolve.
- Re-mix again for about 2 minutes. The mixture is now ready for application.
- Use the mix within 30 minutes.
Application :
- Dampen the surface to be plastered with clean water, Allow excess water to drain off.
- The tiles should be immersed in water for about two hours before fixing.
- Using a steel trowel/ blade, apply the above mix to a thickness of 2-3 mm either on the wall or on the
back of the tile (but not both).
- Using a notched trowel remove excess material, Put the tile in place and tap gently with a wooden
hammer.
- Remove excess mixture from the tiles by using a damp cloth or sponge.
Bbraun Histoacryl Tissue Adhesive
Powder Glue, construction adhesive heat resistant tile adhesive Porcelain Tile Adhesive is also known as the ceramic tile or ceramic tile adhesive glue, points type, polymer type, heavy brick, is a newly developed products, mainly used for stickup ceramic tile, brick, tile and other decorative materials, widely used in internal and external walls, floor, bathroom, kitchen, and other places of building the veneer of decoration. 1.Product Description: Product Name : BE GOOD Strong Adhesion� Tile Adhesive Type : Strong Adhesion Type Color : Grey / White Package : 20kg/bag Application : Tile Adhesive Reference Usage : 2-5kg/ m Mixing Ratio Powder : Water = 20kg : 5 liters Pot Life : 4 hours Application Temperature : 5 - 40 Packaging Details: 20kg/bag / 72bags/pallet / 20pallets/20GP /1360 bags/1*20GP Payment: TT Delivery date: 10 to 15 working days. Original country: China 2. Features 1) Strong adhesion and elasticity. 2) Pasting layer is thin and even, and hardly with hollowness. 3) Easy and simple application, no need to pre-moisturize the bricks and walls. 4) Excellent waterproofing performance. Adoption of scraper method will speed up the tiling. 3. Application Range 1) Suitable for interior and exterior use.� 2) Suitable for substrate made from concrete, masonry, pre-cast material and lightweight brick. 3) Suitable for walls, floors and roofs of architects, such as tunnels, bridges, basement, kitchen, bathroom, balcony, swimming pool and reservoir and so on. 4) Suitable for architects with structure which might easily vibrate and split, such� as post-cast strip, pipe orifice.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.
Varnished laminates with paperboard (While using BOPP laminates, ensure the surface energy of the film should be minimum 38 dynes/sq. cm,). It can be used for paper bag side & bottom pasting
FILM TO PAPER (WINDOW MAKING IN ENVELOPS)
Wet Lamination Adhesives suitable for wrinkle free lamination on printed paper/board to film (BOPP, PET, MET-PET, PVC etc.).
RAPPORT RP-6210 Hybrid Sealant is based on the hybrid silicone polymer one-component adhesive. It react with moisture in the air, and gradually formed a kind of high strength of the elastomer. RAPPORT RP-6210 Hybrid Sealant is a universal sealant, with higher adhesion property and better elastic recovery rate. It is suitable for all kinds of porosity and porous material. RAPPORT RP-6210 Hybrid Sealant Sealant has good adhesion, and has significant characteristics in coating the paint. Features: One component, easy to use Excellent adhesive performance Odorless, non-corrosive Excelent flexible Water resistant Widely use Paintable Technical Data: As Supplied tested at 23�2, RH50%�5%: Aspect:Thixotropic Paste Odor:Low odor Specific Gravity:1.5 Skinning Time, min:20 105 heat loss%:1.7 Application Temperature, :+5 to +45 Service Temperature-40 to +80 As Cured tested at 232, RH50%5% : Movement Capability Level, %20 Hardness Shore A.7d:55 Adhesion Propertiesnon-destruction Tensile modulus(MAX), MPa1.5 Elongation at break, %350 Typical Application: Suitable for various substrate seam sealing, including stainless steel, sheet, copper, wood, coating, etc, with the function of waterproof anti-corrosion sealing seal inside and outside. Suitable for is suitable for sealing, seam sealing, simple bonding as well as for vibration reduction and sound dampening measures in collision repair and vehicle body construction. Suitable for the interface of anticorrosion seal in areas of rivet, bolt, hinge, weld. Suitable for all kinds of anti-water sealing of the gaps of metal structure, fume hood, houses built. Instructions for Use: APPLICATION TEMPERATURE: +5 to +45 1. Cleanse with a cleaning agent, to keep the substrate surfaces completely cleanJOIN LEADER also provide the cleaning agent for your convenience 2. Use the sealant after cleaning agent dries, around 1~2mins later. You can use two different cloth, one for cleaning agent, and the other for sealant. Notice that the two cant be mixed use together, and the second cloth will be better purified cotton and no picking. 3. For better appearance, cover outside of joint areas with masking taps before application. 4. Cut nozzle to desired size and extrude sealant to joint areas. Tool immediately after sealant application, make it smooth and remove masking tape before sealant skins. Color: White, Grey, etc. Other Color Available Package: Cartridges: 250mL, 300mL, Sausage: 300mL, 600mL Different Packing Available
Composed of PVC, polypropylene, sticky tape, or else specific adhesives (reinforced, "strapping", double faced…) or technical or else with customized printing
Adhesive We are the china biggest manufacturer that eneage in producing all kind of nail and adhesive many years.The main products is finish nail, t nail, staples, shoe nail, vinyl coated steel nail, concrete steel nail, various pneumatic nail, galvanized iron wire, contact adhesive, chemical anchor and penumatic tool, etc.We have already passed iso9001, iso14001 .If you are interested in our products, pls contact us freely.
