Product Name
Residual Heat Removal Pumps
Introduction:
An normal residual heat removal pump - one of the main devices in a normal residual heat removal system (RNS) in an auxiliary plant of an AP1000 nuclear power plant, has the following main features: It extracts the heat generated at shutdown of a reactor coolant system. After the start-up of an automatic pressure system (ADS), it provides low pressure replenishment water from the feeding tank of a spent fuel pool cooling system (SFS) to RCS. When needed it discharges the residual heat from refuelling water tank built in the containment. After an accident it provides a long-term refuelling channel to RCS Other features: shutdown purification, low temperature overpressure protection, spent fuel pool cooling
Origin
China
MOQ
1 NOS
Product characteristics 1, the use of a unique single or double impeller structure, greatly improve the ability of dirt through the pump diameter of 5 times the fiber material and the diameter of the pump diameter of about 50% of the solid particles. 2, the mechanical seal uses a new type of hard corrosion-resistant tungsten titanium material, which can make the pump run safely and continuously for more than 8000 hours. 3, the overall structure is compact, small volume, low noise, significant energy saving effect, easy maintenance, no need to build pump room, diving into the water can work, greatly reducing the project cost. 4. The pump seal oil chamber is equipped with a high-precision anti-interference water leakage detection sensor, and the stator winding is embedded with a heat-sensitive element to automatically protect the pump motor. 5, can be equipped with automatic control cabinet according to user needs, the pump water leakage, leakage, overload and overtemperature automatic protection, improve the safety and reliability of the product. 6. The float switch can automatically control the start and stop of the pump according to the required level change, without special care, and it is very convenient to use. 7, WQ type submersible sewage pump can be equipped with double rail automatic coupling installation system according to user needs, it brings more convenience to installation and maintenance, people can not enter the sewage pit for this. 8, can be used in the full head, and ensure that the motor will not overload. 9, there are two different installation methods, fixed automatic coupling installation system, mobile free installation. Main use WQ type submersible sewage pump is suitable for chemical, petroleum, pharmaceutical, mining, paper industry, cement factory, steel mill, power plant, coal processing industry, as well as urban sewage treatment plant drainage system, municipal engineering, construction site and other industries conveyor belt sewage, dirt, can also be used for pumping clean water and corrosive media.
1.ISG vertical pipeline centrifugal pump is used for conveying water and other liquids with physical and chemical properties similar to water. It is suitable for industrial and urban water supply and drainage, pressurized water supply of high-rise buildings, garden sprinkler irrigation, fire pressurization, long-distance transportation, HVAC refrigeration cycle, bathroom and other cold and warm water circulation pressurization and equipment supporting, with the operating temperature T < 80. 2.IRG type vertical hot water pump is suitable for metallurgy, chemical industry, textile, wood processing, paper making, hotel, bathroom, hotel and other boiler high temperature hot water pressurization circulation and urban housing heating circulation pump, the operating temperature is below 120. 3.GRG type vertical high temperature centrifugal pump is widely used in: energy, metallurgy, chemical industry, textile, paper and hotel, bathroom, hotel and other boiler high temperature hot water pressurization circulation and urban housing heating cycle pump, the use temperature below 240. 4.IHG vertical stainless steel pipe centrifugal pump, for the transport of solid particles, corrosive, viscosity similar to water liquid, suitable for petroleum, chemical industry, metallurgy, power, paper, food and pharmaceutical and synthetic fibers and other departments, the use temperature of -20 ~ 120. 5.YG type pipeline oil pump, for transporting gasoline, kerosene, diesel and other petroleum products, the temperature of the transport medium is -20 ~ + 120. 6.IHGB vertical stainless steel explosion-proof chemical centrifugal pump, suitable for transporting flammable chemical liquids. 7.ISGD, IRGD, GRGD, IHGH, YGD, IHGBD vertical low speed centrifugal pump, suitable for occasions with low environmental noise requirements and air conditioning cycle.
This commercial hot water heat pump is the best solution for hot water supply of commercial project, and can work with advantages of high safety, stability, much convenience, energy saving, and environment friendly, which assures 24 hours comfortable hot water using. It is widely used in hot water project of school, hotel, hospital, supper market and other large building, which needs large water volume supply. Commercial hot water heat pump series Model YINI-050S-RS Heating mode Circulating+Direct heat Ambient temp.range Rated heating capacity 18KW COP 4W/W Max. Running Current 9.7A Power supply 380V 3N 50Hz IP Code IPX4 Safety function High and low pressure protection, Overload protection, Temperature protection, Power phase sequence protection, etc. Refrigerant type/weight R407C/2.0kg Compressor QTY 1 PCS Compressor type Scroll Max. outlet water temperature 60 Water side heat exchanger type Casing/high efficiency tank Direct heat waterpipe nozzle G1 Internal thread (inch) Circulating waterpipe nozzle G1 Internal thread (inch) Air out type Top discharge Fan motor QTY 1 PCS machine dimension Packing dimension Net weight 130KG Gross weight 150KG Detailed Images Main Features 1) Copeland scroll compressor, quiet and high efficiency. 2) High efficiency heat exchanger. 3) 600 stage adjustment precision electronic expansion valve. 4) Schneider electrical components. 5) Intelligent controlling system. 6) Intelligent EE valve, excellent efficiency at different ambient temp. 7) Easy installation and LCD operation. 8) Automatically defrosting. Optional: R410a, R22, R407c refrigerant is available.
Swimming Pool Heat pump are specially designed and engineered for pool or spa water temperature control. Intelligent control system are let the units high efficiency and stable working performance. The COP could be 6.8 which saves at least 80% energy compared with traditional electric swimming pool heating equipments. Suitable for large pools in hotel, public parks, schools, sport center, gyms, etc. enter, gyms, etc. Wholesale Constant Temperature Heater Swimming Pool Heat Pump Main Features 1) PVC Titanium heat exchanger with full resistance against corrosion, more durable. 2) Compact structure, easy demountable for access. 3) High efficiency compressor, saving energy. 4) Flow switch for water flow protection. 5) Intelligent controller and adjustment by quick mind microprocessor. 6) Intelligent LCD display wired controller. 7) Air exchanger (fins-coil )with hydrophilic coating. 8) Automatic defrosting function included. Optional: R410a, R32, R407c refrigerant is available. Model YINI-010-YC Heating mode Circulating Ambient temp.range Rated heating capacity 7.8KW COP 6.7W/W Rated input power 1.15KW Max. Running Current 5.9A Power supply 220V-240V 1N 50Hz IP Code IPX4 Safety function High and low pressure protection, Overload protection, Temperature protection, Power phase sequence protection, etc. Refrigerant type R32 Compressor QTY 1 PCS Compressor type Scroll outlet water temperature 28 Heat Exchanger Titanium Air Flow Direction Horizontal Automatic defrosting by 4 way valve Casing Material ABS plastic Rated water flow 2.5 mh Air out type Top discharge Fan motor QTY 1 PCS Noise 56 dB(A) machine dimension Packing dimension Net weight 44kg Gross weight 55kg
Split heat pump water heater All-in-one heat pump Air&solar type heat pump Ground source heat pump Swimming pool heat pump DC inverter heat pump Air to water heat pump central heating series Air to water heat pump hot water series.
Single unit upto 25 tons. 230 volts 1 phase / 440 v 3 phase 50 hz system.
Name of product :- Industrial and commercial Chilling plant and Heat pump Product origin:- Gujarat,India Product specifications:- capacity of 5 TR to 20TR, Low electricity consumption, Customization - available as per client´s requirements.
Heating Pumps
Feature: 1) economical operation Generally cost less to operate than other types of conventional heating systems, save your electricity or gas bills. 2) safety Operate at a high efficiency with no flames, fumes, or flues; water and electricity isolated 3) environmental friendly Transfer heat thats already in the environment; low co2 emissions. 4) easy operation With intelligent control systems which convenient and simple operation 5) constant hot water supply Provide hot water no matter in cloudy day, snowy day or at night, unlike solar collectors which have to be facing the sun. 6) wide application Heat pump water heater can be applied to sanitary hot water, house heating and so on.