Salient Features
Squirrel Cage Induction type totally enclosed Motor (TEFC).
Single Phase with running Capacitor
It also works on Low Voltage
Easy installation and easy Servicing
MOTOR BODY : Graded Cast Iron
STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hourt
ROTOR SHAFT : Stainless Steel 420 H&T
IMPELLER : Graded Cast Iron and Dynamically Balanced
BALL BEARING : Reputed Make ZZ Ball Bearing
SEAL : Monoblock Pump with Asbestos Gland Packing & Mechanical Seal
WINDING : Super enameled EC Grade Copper Wire
HP 0.5 HP to 2.0 HP
HEAD 6 Mtrs to 28 Mtrs
CAPACITY 25: 550 LPM
VOLTAGE : AC 180: 240 V, 50 Hz, 2900 RPM
NUMBERS OF MODEL 24 Nos.
HP 0.5 HP to 25 HP
HEAD 6 Mtrs to 86 Mtrs
CAPACITY 25: 2100 LPM
VOLTAGE : AC 300- 415 V, 50 Hz, 2900 RPM
NUMBERS OF MODEL 53 Nos.
Centrifugal Monoblock Pumps Available Up to 2.0 H.P., Specially Design For Low Voltage Range. MATERIAL OF CONSTRUCTION: Shaft : S.S. 410, Motor Body : Graded Cast Iron, Impeller : Graded Cast Iron, Casting Parts : Graded Casting, Roller Bearing : SKF Made Bearing. Thermal Overload Protector Available. TECHNICAL DETAILS: Head Range : Up To 30 mtrs, Discharge Range : Up To 1000 lpm, Suction & Delivery : 25 X 25 mm / 50 X 50 mm / 65 X 50 mm/ 75 X 65 mm, Power Rating : 1 H.P. TO 2 H.P., Voltage Range : 120 V TO 240 V (1-Phase).
Monoblock pumps - Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features - High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP - Specially designed for wide voltage operation - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life - Back pull-out design for easy servicing and repair - Double shielded ball bearings, so no need of external lubrication - All Model fitted to Mechanical seal. specification - Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP) - Version : Single Phase, 220-240V, 50Hz AC Supply Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 32 Mtr. - Maximum Flow Rate : 940 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Mechanical Seal - Type of Duty : S1 (Continuous) - Method of Starting : Permanent Split Capacitor (PSC) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm) characteristics of clear cold water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Mechanical Seal : Carbon & Ceramic Motor Shaft : EN-8 Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Plastic
Monoblock Pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. salient features High operating efficiency resulting in lower power consumption - Good suction lift characteristics - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. - Mechanical seal is provided as per customers requirement Specification - Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 2880 RPM - Maximum Total Head : 65 Mtr. - Maximum Flow Rate : 1450 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase, Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80 100 X 80 and 100 X 100 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 mÃ?/sec (max.) - Ph Value : 6.5 to 8.5 Material of construction - motor Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminium
Monoblock pumps Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. Salient Features High operating efficiency resulting in lower power consumption. - Good suction lift characteristics. - Specially designed for wide voltage operation. - Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life. - Back pull-out design for easy servicing and repair. - Double shielded ball bearings, so no need of external lubrication. specification - Power Range : 1.5 Kw - 5.5 Kw (2.0 HP - 7.5 HP) - Version : Three Phase, 380-415V, 50Hz AC Supply - Speed : 1440 RPM - Maximum Total Head : 12 Mtr. - Maximum Flow Rate : 3160 LPM - Maximum Suction Lift : 7 Mtr. - Degree of Protection : IP 44 - Class of Insulation : B0 - Maximum Ambient Tem. : 40 C - Sealing : Stuffing Box - Type of Duty : S1 (Continuous) - Direction of Rotation : Three Phase - Electrically Reversible - Nominal Pumpset Size (Suction X Delivery in inch) : 80 X 80, 100 X 100, 125 X 125, 150 X 150 (All size in mm) Characteristics Of Clear Cold Water - Maximum liquid temperature : 33C max - Permissible amount of sand : 25 g/m - Allowable solids : 3000 ppm (max.) - Chloride ion density : 500 ppm (max.) - Turbidity : 50 ppm silica scale (max.) - Hardness (Drinking Water) : 300 ppm (max.) - Specific gravity : 1.004 (max.) 6 - Viscosity : 1.75 x 10 m/sec (max.) - Ph Value : 6.5 to 8.5 Part Name Material Gland Dori : Graphite String Motor Shaft : EN-19 with SS SLEEVE Motor Body : FG-250 Bearing : SKF End Cover : FG-250 Bracket : FG-250 Flange : FG-250 Casing : FG-250 Impeller : FG-250 Cooling Fan : Aluminum
1.ISG vertical pipeline centrifugal pump is used for conveying water and other liquids with physical and chemical properties similar to water. It is suitable for industrial and urban water supply and drainage, pressurized water supply of high-rise buildings, garden sprinkler irrigation, fire pressurization, long-distance transportation, HVAC refrigeration cycle, bathroom and other cold and warm water circulation pressurization and equipment supporting, with the operating temperature T < 80. 2.IRG type vertical hot water pump is suitable for metallurgy, chemical industry, textile, wood processing, paper making, hotel, bathroom, hotel and other boiler high temperature hot water pressurization circulation and urban housing heating circulation pump, the operating temperature is below 120. 3.GRG type vertical high temperature centrifugal pump is widely used in: energy, metallurgy, chemical industry, textile, paper and hotel, bathroom, hotel and other boiler high temperature hot water pressurization circulation and urban housing heating cycle pump, the use temperature below 240. 4.IHG vertical stainless steel pipe centrifugal pump, for the transport of solid particles, corrosive, viscosity similar to water liquid, suitable for petroleum, chemical industry, metallurgy, power, paper, food and pharmaceutical and synthetic fibers and other departments, the use temperature of -20 ~ 120. 5.YG type pipeline oil pump, for transporting gasoline, kerosene, diesel and other petroleum products, the temperature of the transport medium is -20 ~ + 120. 6.IHGB vertical stainless steel explosion-proof chemical centrifugal pump, suitable for transporting flammable chemical liquids. 7.ISGD, IRGD, GRGD, IHGH, YGD, IHGBD vertical low speed centrifugal pump, suitable for occasions with low environmental noise requirements and air conditioning cycle.
Supplier: En590, jet fuel a1, pet coke, pump, valve, cosmetic, mechanical seal, cotton bag, glass bottle, hand sanitizer, hydraulics, cosmetic bottles,socks, paper drink straw, alcohol wipe, other korean products, mask, or nitrile gloves and hand sanitizer and korean cosmetics
CDL/CDLF is a versatile product that can transport a variety of different media from tap water to industrial liquids, adapted to different temperature, flow and pressure ranges, CDL is suitable for non-corrosive liquids, CDLF is suitable for slightly corrosive liquids. CDL type light vertical multistage centrifugal pump application field Water supply: water plant filtration and transportation, water plant zoning water supply, supercharging, supercharging of high-rise buildings. Industrial pressurization: process water system, cleaning system, high pressure flushing system, fire protection system. Industrial liquid transport: cooling and air-conditioning systems, boiler feedwater and condensing systems, machine tools, acids and alkalis. Water treatment: ultrafiltration system, reverse osmosis system, distillation system, separator, swimming pool. Irrigation: field irrigation, spray irrigation, drip irrigation. CDL type light vertical multistage centrifugal pump operating conditions 1, thin, clean, non-flammable and explosive liquid that does not contain solid particles or fibers. 2, conveying liquid temperature: room temperature type -15 to +70 3, hot water type +70 to +120 4, ambient temperature: high +40 5. Altitude: 1000m high
Supplier: Pump pv22
Salient Features Submerge in water permanently, so no need of separate cabin Priming is not require It also works on Low Voltage Noiseless and Vibration free operation Supplied with foot valve MOTOR BODY : Stainless Steel with 1% Nickel / Graded Cast Iron STAMPING : Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt loss/hour TRUST BEARING : Thrust Plate With Fiber Pad and CT Bearing of Gunmetal BUSH BEARING : GM LTB 4 SEAL : Nitrile Rubber Oil Seal ROTOR SHAFT : Stainless Steel 420 H&T IMPELLER : Dynamically balanced WINDDING WIRE : Poly Wrap Double coated copper wire HP 0.5 HP to 2.0 HP HEAD 7.5 Mtrs to 32.5 Mtrs CAPACITY :40 LPM to 480 LPM VOLTAGE : AC 180- 240 V, 50 Hz, 2900 RPM NUMBERS OF MODEL 11 Nos. HP 1.0 HP to 30 HP HEAD 5 Mtrs to 75 Mtrs CAPACITY 40 LPM to 5200 LPM VOLTAGE : AC 300- 415 V, 50 Hz, 2900 RPM NUMBERS OF MODEL 166 Nos.