Cleaner Clear

In co-operation with major manufacturers in Turkey, FALMER is able to supply a wide range of products, including construction chemicals.

Our aim is to supply the most excellent thermal insulation materials and construction chemicals and to bring them together with the end consumer. To contribute to the national economy by minimising the increasing energy demand of our world with our insulation materials.

WHITE SEALANT 450 GR
COLORED SEALANT 450 GR
SILICONE CLEAR 280 GR
POLYURETHANE LIQUID NAIL 450 GR
SILICONE-BASED JOINT FILLER 380 GR
CORNICE ADHESIVE 450 GR
STYROFOAM CORNICE ADHESIVE 450 GR
WOOD GLUE 100 GR
WOOD GLUE 350 GR
WOOD GLUE 700 GR
SPRAY PAINT INTERMEDIATE COLORS 200 ML (160 GR)
SPRAY PAINT INTERMEDIATE COLORS 400 ML (300 GR)
SPRAY PAINT METALLIC â?? GOLD 200 ML (160 GR)
SPRAY PAINT METALLIC â?? GOLD 400 ML (300 GR)
CLEAR VARNISH 200 ML (160 GR)
CLEAR VARNISH 400 ML (300 GR)
PAINT REMOVER 200 ML (160 GR)
PAINT REMOVER 400 ML (300 GR)
POLYURETHANE FOAM 600ML
SILICONE SPRAY 500 ML (380 GR)
BRAKE PAD AND CLUTCH CLEANER 500 ML (390 GR)
LABEL AND STICKER REMOVER 200 ML (160 GR)
LIQUID GREASE 200 ML (160 GR)
LIQUID GREASE 400 ML (350 GR)
RUST REMOVER 200 ML (170 GR)
RUST REMOVER 400 ML (320 GR)
G-60 LUBRICANT 200 ML (170 GR)
G-60 LUBRICANT 400 ML (320 GR)
FAST ADHESIVE 200 ML (35 GR JAPON)
FAST ADHESIVE 400 ML (75 GR JAPON)
MOLD RELEASE 400 ML (350 GR)
CHAIN LUBRICANT400 ML (350 GR)
WATERPROOFING SPRAY 400 ML (350 GR)
CHEMICAL ANCHOR
LIGHTER GAS 270 ML
CAMPING GAS 227GR
ZINC SPRAY 400ML (350GR)
GAS DUSTER SPRAY 400ML
DRAIN CLEANER (500 GR)
DRAIN CLEANER (1000 GR)
DRAIN CLEANER (2000 GR)

We supply high-performance Viscosity Reducing Agents, specially formulated to improve the flowability of various systems by effectively reducing viscosity, enhancing transport efficiency, and ensuring operational stability in challenging environments.

-- Key Features

Significantly reduces fluid/system viscosity

Enhances pumpability, injectivity, and mixing efficiency

Excellent thermal stability and salt/calcium tolerance

Compatible with a wide range of polymers, surfactants, and solvents

Available in liquid or powder form for easy integration

-- Applications

Oilfield chemicals: Fracturing fluids, drilling muds, completion fluids

Water-based or solvent-based coatings

Concrete and mortar admixtures

Industrial detergents and cleaners

Chemical processing and wastewater treatment

-- Technical Data

Appearance: Clear liquid / white to off-white powder

pH Range: 6.0-9.0 (adjustable by formulation)

Dosage: Typically 0.1% -1.0% (depending on system)

Packing: 25kg bag / 200kg drum / IBC tank

Shelf life: 12 months under dry and cool storage

-- Why Choose Our Viscosity Reducer?

Proven results in high-viscosity systems

Custom formulations for oilfield, coatings, and construction

Full technical documentation: COA, MSDS, TDS

Fast shipment with flexible packaging options

Exported to multiple regions with stable supply chain

Our Viscosity Reducers are engineered to meet the needs of modern industry ensuring smooth operations, reduced energy consumption, and improved productivity.

Contact us today to get a quotation, sample, or tailored solution!

A. PRODUCT DESCRIPTION:
These are Paint thinners. These are designed to improve the flow of a range of MARLAC Paint products. Can also be used as a cleaner for metal cleaning, pumps and tools before and after applications.
B. TYPICAL USE:
Suitable as Thinner for :
1)Alkyd and Oil based Paints
2)Epoxy Paints
3)Polyurethane paints
4)All types of Stoving and Air drying paints
5)Cleaning thinner
C. COLOUR:
Colourless clear liquid.
D. PRODUCT DATA:
(a) Boiling Range : Calculated
(b) Flash Point : As Per Std
(c) Density : 0.85 + 0.1
The data may slightly vary depending on the properties of the RM Solvents used.
E. PACKAGING:
5 or 20 Lt Drum
F. STORAGE:
The material must be stored as per the regulations. Keep the containers in Dry, Cool, Well Ventilated
space and away from the source of Heat and ignition. Containers must be kept tightly closed. Handle with care.
G. SHELF LIFE:
Minimum 12 months, provided stored properly.
H. HEALTH AND SAFETY:
Please follow the precautionary advices on the container. Use under well ventilated conditions. Do not
inhale spray mist. Avoid Skin contact. Spillage on the skin should immediately be removed with
suitable cleanser, soap and water. Eyes should be well flushed with water and medical attention sought
immediately.
I. DISCLAIMER:
The information in this document is given to the best of MIPPLâ??s knowledge, based on the laboratory
testing and practical knowledge. MIPPL reserves the right to revise the data without further notice.
Users should always consult MIPPL for specific guidance on the general suitability of this product for their needs and specific practices.

Self Supported Structure Without Trusses, Purlins Or Ancillary Support
Trusses, Purlins or any other kind of ancillaryà none of these is required to have PROFLEX SYSTEMS installed. PROFLEX Roof stands on its own up to 40 meter-spans, thus offering economy in both, time and energy.

Free From Holes, Nuts, Bolts & Overlaps
One of the strongest distinguishing features of our product is the mechanical system of panel connection, which requires no holes, nuts, bolts, overlaps or sealants, adding on to the economy of costs.

Flexible

Unobstructed 40 Meters of Clear spans
Our System is a stunning success when it comes to roofing for wider spans. A continuous roof of up to 40 meters at a stretch can be easily and very effectively covered with PROFLEX SYSTEMS. The technology derives this essence from its formation that makes it self supported to sustain external load factors without any steel structure and intermediate columns.

Economical

Zero Maintenance
This innovative technology makes our product needless of any ongoing efforts towards maintenance, thus completely eliminating the need for constant safeguarding.

No bird nuisance
As our System is free of any support structures, the possibilities of any kind of bird nuisance in the building interiors are eliminated. Overcoming this common problem faced by the conventional roofing alternatives, our product ensures you cleaner and more hygienic factories and warehouses.

DURABLE 100% Leak-proof
Our technology is full-proof against water seepage and extreme weather conditions. This leads to enhanced protection to goods & machinery stored in your facility, thus substantially reducing the costs related to product failure, rejection or damage.

Larger Enclosed Volumes
The absence of any support structures in our System results in larger enclosed volumes, which offers optimum space utilization.

Resistance To Damage & Corrosion
The basic purpose of a roof is to ensure utmost protection to the goods, machinery and people. And that's where our prime focus lies. Our System possesses certain dominant traits like non-combustible qualities and higher tensile strength, which makes them stronger against natural calamities like fire, earthquakes or hurricanes.