Tecno Mkp 0-52-34

Commodity: Ammonium nitrate porous prills
Molecular formula: NH4NO3
Molecule Weight: 80
CAS: 6484-52-2
UN:1942
Hazardous class:5.1


Commodity: Ammonium nitrate porous prills
1.Production of granular porous ammonium nitrate for industrial use and agricultural granular ammonium nitrate. Products with low moisture content, not easy to cake; high compressive strength, not easy to break; high oil absorption rate. Ammonium nitrate content is more than 99%, the appearance is white granular crystals, no impurities visible to the naked eye.

2. Purpose:
Explosive material: granular ammonium oil explosive is made by mixing porous ammonium nitrate with raw oil. Its speed can reach more than 3 200 m/s. This explosive has strong explosive power, safe and reliable use, low price, cost saving, and can usually reduce the cost by 20%-40%. At present, this kind of explosive has been widely used in mining, construction, railway and highway construction, agricultural and water conservancy construction and national defense and other fields.

3. Product specifications:
Specifications:
Appearance white granule
Particle size 0.5-2.5mm
NH4NO3 >99.5%
N >34%
Oil absorption > 8%
Moisture < 0.2%
PH >4

Commodity: Synthetic Cryolite
Formula: Na3AlF6
M.W.: 209.95

Properties: The product is a white crystalline powder or a sandy-size granularity, and a pinkish crystalline powder or a sandy-size granularity as well. Sp.gr.2.953.01g/cm3, melting point about 1000centigrade, specific heat 1.056j/gcentigradeat 18100centigrade. Its slightly soluble in water, but insoluble in anhydrous hydrogen fluoride. The content of its crystal water will be decreased while the increasing of the molecular ratio, therefore its loss on ignition will be also decreased while the increasing of the molecular ratio. After the paste of synthetic cryolite with different molecular ratio dehydrates, the loss on ignition at 800centigrade will appear 10.34%, 6.22% and 2.56% when the molecular ratio reaches 1.74, 2.14 and 2.63 reactively.

Specifications:
Appearance white powder
F 52% min
Al 12% min
Na 33% max
SiO2 0.36% max
Fe2O3 0.08% max
CaO 0.5% max
P2O5 0.03% max
SO4 0.6% max
H2O 0.4% max
Loss on ignition 2 % max

Uses: Its mainly used as a flux in the aluminum smelting by fused-salt electrolysis; also an opalizer in the manufacture of enamel; an opacifier and auxiliary solvent of glass and enamel; an insecticide of crops; a flux in aluminum alloy casting; and in the production of ferrous alloy and effervescing steel; as well as a wear-resistant filler for resin and rubber-boned abrasive wheels.

Packing & Storage: In plastic coating woven bags with plastic film inside, 25kg,40kgs, 50kgs or 1000kgs net each, or as the requirement of clients.Stored: in a cool , ventilated, dry place.

ProName: Acetone oxime ,Acetoxime
CasNo: 127-06-0
Molecular Formula: C3H7NO
Appearance: White crystal
ProductionCapacity: 1-100 Metric Ton/Month
Grade: Industrial Grade

Specifications:
index value
appearance white crystalline powder or flakes
Assay 99.0%
residue on ignition 0.01%
Boiling point 135 c at 1,013 hpa
Moisture 0.25%


Uses:
It is used as raw material for medicine, pesticides, dyes and organosilane coupling agents. It is also useful in the determination of nickel and cobalt. Acetone oxime is an excellent corrosion inhibitor (deoxidant) with lower toxicity and greater stability compared to hydrazine.

Package:
25kg carton drum or 1kg foil bag or by request of clients

Storage: Store in dry, dark and ventilated place

Transportation: by sea or by air

Product Name:Aluminium sulphate
Molecular Formula:AL2(SO4)3
Hs Code: 2833220000
CAS Code:10043-01-3
Standard:HG2225-2010

Shape:flake, powder, 2-4cm lump and 2-5mm/3-8mm granular

Properties:There are two types,anhydrous aluminium sulphate and aluminium sulphate octadecahydrate. In normal condition , it is AL2(SO4)3 18H2O; AL2(SO4)3 14H2O after efflorescence, can be white powder , glittering flaky or crystalline flakes, odorless, sweet to slight bitter.

Use:Sewage Treatment, treatment of drinking water, Sizing of paper , Cement Additive.

Specifications
Item Name Standard
AL2O3 15.6% 16.5% 17%
Fe2O3 ¤0.5 % 0.005 % 0.004%
PH value .0 3.0 3.0
Water insoluble matter 0.2% 0.04% 0.03%

Packing 25kg or 50kg or 1000kg in plastic lined woven bag

Product Name: Ferrous Sulphate Heptahydrate
Molecular Formula: FeSO4. 7H2O
CAS No.: 7782-63-0
Mol Weight: 278.05

Usage and Dosage:
1. Industrially: ferrous sulphate heptahydrate is mainly used as a precursor to other iron compounds. It is a reducing agent, for the reduction of chromate in cement.
2. Nutritional Supplement: Together with other iron compounds, ferrous sulphate is used to fortify foods and treat iron-deficiency anemia. Constipation is a frequent and uncomfortable side effect associated with the administration of oral supplements. Stool softeners often are prescribed to prevent constipation.
3. Colorant: Ferrous sulphate can also be used to stain concete and some limestones and sandstones a yellowish rust color.
4. Water Treatment: Ferrous sulphate has been applied for the purification of water by flocculation and for phosphate removal in municipal and industrial sewage treatment plants to prevent eutrophication of surface water bodies.

Storage:
Storage Store in cool, dry, well ventilated area, removed from oxidising agents (eg. hypochlorites), acids, metals and foodstuffs. Ensure containers are adequately labelled, protected from physical damage and sealed when not in use. Large storage areas should have appropriate ventilation systems.

Precaution: Flammability Non flammable. No fire or explosion hazard exists.

Packing: Net weight 25kgs, 50kgs per each plastic woven bag

Technical Specification
Appearance: Light green crystalline powder


Fe 19.7%min
Pb 20 ppm max
As2 ppm max
Cd 5 ppm max
Size Crystalline Powder

Commodity: Sodium Hydrosulfite
Other name: Synonyms: Sodium Hydrosulphite; Sodium Dithionite; Dithionous acid, Disodium salt; Sodium Sulfoxylate
CAS No.: 7775-14-6
Molecular Weight: 174.10
Chemical Formula: Na2S2O4

Product Description
Appearance: White, crystalline powder.

Product Feature
Odor: Slight irritative.
Specific Gravity: Unavailable
Solubility: Soluble in water.
Density: 2.19
pH: 6-7
pH Test-Method: PH test paper.
% Volatiles by volume @ 21C (70F): 0
Boiling Point: Not applicable.
Melting Point: >300 C Decomposes.
Vapor Pressure (mm Hg): No information found.
Bulk Density: ~0.9
Evaporation Rate (BuAc=1): No information found.

Application
1. Widely used in textile industry for vat dyeing, reduction cleaning, printing and stripping, textile textile bleaching .
2. bleaching paper pulps , especially mechanical pulps, its the most fittable bleaching agent in pulps.
3. bleaching kaolin clay, fur bleaching and reductive whitening, bleaching of bamboo products and straw products,
4. in mineral, the compound of thiourea and other sulphides.
5. as reducing agent in chemical industry.
6. Sodium hydrosulfite food additive grade is used in foodstuffs, as bleaching agent and preservative dried fruits, dried vegetable, vermicelli, glucose, sugar, rock sugar, caramel, candy, liquid glucose, bamboo shoots, mushrooms and canned mushrooms.

Packaging 50kg/100kg net in iron drums with double PVC bags

Product Specification/Models
NDEX 90%, 88%, 85%. FOOD ADDITIVE
Na2S2O4, 90%, 88%, 85%, Fe 20ppm ZincZnOther heavy metal
calculated as Pb, 1ppm
Water Insolubles05%
Shelf Life(month)12

Cmmdity: Aluminum Fluride (Aluminium fluride)
ther name: Aluminum trifluride
Frmula:AlF3
M.W.:83.98

Prperties: The prduct is a white needle crystal r pwder. SP. GR. 2.8823.13g/ cm3, sublimatin temp. 1272Celsiur scale.Its slightly sluble in water and greatly sluble in HF liquid. The chemical prperty fr the high density aluminum fluride is very steady, but that cntains certain crystal water will be decmpsed int Al23 at high temperature with HF being released.

Specificatin:

grade chemical cmpsitin % Physical character
F Al N2 Fe2342- P25 LI Bulk dity g/cm3

AF-0 61.0 31.5 0.30 0.10 0.06 0.10 0.03 0.5 1.5
AF-1 60.0 31.0 0.40 0.30 0.10 0.6 0.04 1.0 1.3
AF-2 58.0 29.0 2.8 0.30 0.12 1.0 0.04 5.5 0.7
AF-3 58.0 29.0 2.8 0.35 0.12 1.0 0.04 5.5 0.7
Uses: Its mainly used as an adjusting agent fr electrlyte in aluminum smelting by fused salt electrlysis, als in ceramic glaze, catalyst and flux f nnferrus metal metallurgy etc.

Brief Intrductin f the Prductin Technics
In the Hydrgen Fluride Reacting Furnace which is heated utside, Vitril reacts with Flurite t create the Hydrgen Fluride Gas and Anhydrus Fluride Plaster by heating in the prcess f prducing Aluminum Fluride, then the Hydrgen Fluride Gas react with dry Aluminium Hydrxide in Fluidized Bed t create t Aluminum Fluride and water.

Packaging
packed in wven PP bags with plastic film inside. Each bag has net weight f 25kgs, 50kgs, 500kgs and 1000kgs.

L-Cysteine, E920, CAS No.52-90-4, a non-essential amino acid manufactured through fermentation. Cysteine is extracted from raw materials of animal and human origins. Cysteine has the same structure as serine, but with one of its oxygen atoms replaced by sulfur.

As an experienced L-Cysteine manufacturer and supplier, we has been supplying and exporting L-Cysteine for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.

Categories Amino Acids
Qty in 20â??FCL 12000kg
Min Order 500kg
Origin China
Packaging Factory Packaging or Neutral
Certificate ISO, Kosher, Halal, BRC
E No. E920
CAS No. 52-90-4
HS Code 293090
Specification FCC/USP

L-Cysteine Specification
Item Specifications (AJI97 )
Appearance White crystal or crystalline powder; tasteless
Assay, % 98.5~101.0
Specific rotation -218~ -224
Loss on drying, % 0.2
Transmittance, % 98.0
Chloride (as Cl), % 0.02
Sulfate (as SO4), % 0.02
Ammonium as (as NH4), % 0.02
Iron (as Fe), % .001
Heavy Metals (as Pb), % 0.001
Arsenic (as As), % 0.0001
pH Value 5.0~6.5
Residue on ignition, % 0.1
Other amino acid Conforms

Ferrous Lactate, E585, CAS no.5905-52-2, is a ferrous salt of lactic acid manufactured process through neutralizing lactic acid. Ferrous Lactate is widely used as acidity regulator in food, beverage, dairy product, powder drinks, baby food and bakery.

As an experienced Ferrous Lactate manufacturer and supplier, we has been supplying and exporting Ferrous Lactate for almost 10 years, please be assured to buy from us. Any inquiries about price and the market trend please feel free to contact us, we will reply you within 1 working day.


Categories Preservatives
Qty in 20 FCL 20000kg
Min Order 1000kg
Origin China
Packaging Factory Packaging or Neutral
Certificate ISO, Kosher, Halal, BRC
E No. E585
CAS No. 5905-52-2
HS Code 291811
Specification FCC/USP

Ferrous Lactate Food grade Specification
Ferrous lactate 96% .Min
Loss on drying 20% .Max
Chloride(CI) 0.1% .Max
Iron (Fe 3+ ) 0.6% .Max
Sulphate(SO 4 ) 0.1% .Max
PH 5-6
Lead 1 ppm.Max
Arsenic 3 ppm.Max