Lio Ii-4810 Ups

24v 12v Power Toroidal Transformer (Click here for Customized Design And Interactive Design Service) Single-phase toroidal transformers, power range from 20VA to 5000VA. Designed and tested according to EN61558. Suitable for installation in electronically equipment. Designed as a safety isolating transformer with separate insulated windings and prepared for class II equipment. Short circuit and overload protected with thermal fuse on primary side. Up to 50% less weight than a similar conventional transformer. Low magnetisation currents and no-load losses. Applications: Suitable as safety isolating transformer in constructions where low weight, flexible dimensions and optimum conditions between dimensions are preferable. Technical specifications Input voltage: Customized Frequency: 50-60Hz Output voltage: Customized According to: EN61558 Test/insulating voltage: 4kV AC RMS Construction class: II In carton

Dimmable constant current led driver for leds application High efficiency, up to 85% Protection: short-circuit with hiccup mode, overload Natural air convection Class ii, no fg Plastic case, ip20 for indoor use only Optional multi-dim function, suitable for led lighting application High current accuracy to make led lifetime longer Functions: 100 to 240v ac switch dim: On/off: short push (50 to 500ms ) on switch Stepless dimming: long push and hold (>500ms) on switch For tuning of light level: with every 2nd long push, light level goes opposite direction Built in with permanent memory Synchronization: no limitation on number of drivers when connected to same switch 1 to 10v dc dim: 1 to 10v dc dimmer and ext pot dimmer Multi-current set: 300, 450, 500, 650 and 700ma select, set dip switch Memory function: power offer memory function to memorize the light intensity, soft light on to memorized intensity, nice to eyes Dim range and effect: 0.3 to 100% stepless dim to make light intensity vary smoothly, no flickering Warranty: 2 years Package size:45.5x39.5x22cm Gross weight:20.0kg Qty:100pcs/carton

Compatible model:EOS 5D Mark II/5D Mark III/EOS 7D/EOS 60D Product Description: Use High-end Class A Batteries. The advantages include fully charged, longer life, 100% built-in perfect compatible chip. Though use it under high frequency, it can still have the best internal consistency, to ensure the highest efficiency and stability of the batteries. Product Functions: 1.Digital Super-core Technique. Adequate Battery Energy. Allowing you to hoot more and longer recording time; 2.No Memory Effect. Support fast charging, re-use and long life; 3.Use the safety valve technique of well-known factory. >72-hour aging test to ensure that each battery is reliable and safer.; 4.With the combination of PC bulletproof plastic shell material and precision ultrasonic welding technology, it is anti-aging, anti-seismic, can avoid damage, more durable and easy-to-use. Use Tips: 1.Make sure it is run out of power before using the new battery. Then continuous charge for more than 10 hours immediately (do not care about the ¡¡ãbattery is fully charged¡¡À is displayed after charging for 1-2 hours). Try to use the battery until it is fully run out, then you can start the next charging. After several times, battery will be activated to the best condition. The said limitation will not be occurred for future use. Nevertheless, it is advisable to charge for 2-4 hours each time for the battery to be fully charged. 2.Please use the original or special charge for the charging. If you use the universal charger and lead to the battery is not usable for its performance was dropped, warranty will not be provided. 3.To avoid battery collision or short circuit, please keep the battery clean, dry and do not place it under high temperature. 4.Do not keep the battery when it is fully run out or charged. It is best to keep when it has about 40% electricity and recharge once for every six months. Specifications: Durable Safe, Reliable, Stable, Fully charged up to 500-800 times or above. Multiple Protection Excellent design makes the product not only has the overcharge, discharge, multiple protection, over-current and short-circuit, but also has to balance internally for the charge and discharge of the batteries at the same time. Warranty Use new A-grade world top SANYO power batteries, safe, reliable and stable. Quality Test Standard modern assembly line, before the products are delivered, they have to pass the charging, discharging and aging tests and guarantee 100% quality test Detailed Parameters Item No.BatteryDimensions Battery VoltageBattery Capacity LP-E6 SANYO 56.7mm*38.3mm*20.9mm7.4V1620mAh 1*6

Digital Control Technology--LCD Display Low frequency pure sine wave inverter - single-phase interactive uninterrupted power supply- high quality Function: 1, Auto Voltage Regulation(AVR): When utility power is unstable, this machine owns precise and stable voltage output function. For example, in China, the utility voltage can drop to 190V at peak demand, but the output voltage of this machine is 220 V, 3% V, 50 Hz, 0.5, which can help to protect electrical equipment. 2, DC/AC Conversion Function: When the utility power fails suddenly in the home, office, supermarket and industrial zone etc, it can be an environment-friendly engine; in some outdoor areas without electricity, it can be used as Mobile Power and provide AC power for household appliances. 3, Intelligent Charging Function:. When batteries run out of power, inverter can be connected to the utility and automatically charge the battery. When connected with utility and battery, it could be used as a UPS system and will charge batteries automatically when connected with utility, The charging process can be divided into three sections. Section I: With largest constant current charging, this can improve the backup power. Section II: Constant voltage charging to charge batteries gradually, then there is enough time for batteries to absorb energy .Therefore, battery electrodes are protected and battery overcharge can be avoided. Section III: When the batteries are fully charged, the output of inverter will turn into float voltage to maintain full power state of batteries for a long time. 4. UPS Function: When this inverter connected with batteries and utility, inverter will start its UPS function. The output UPS of the inverter can be choose as AC first(utility comes first) or DC first(DC power first).The transfer time is less than 5 milliseconds. Features: 1, Pure sine wave AC output; 2, Intelligent program control, CPU management; 3, With LCD display, users can know operation status of the whole system clearly; 4, With multi-functions, extra charger is not needed and electric appliances can be protected (AVR, UPS); 5, Wide applicable scope, can be wide used for all kinds of occasions, such as outdoor area without electricity, industrial area, household, office, supermarket, hospital, bank, solar system, wind energy systems etc; 6, With external battery connection, its convenient for users to expand use time and back-up power time; 7, With super load carrying ability and high load capacity, this inverter can not only carry resistance load; but also can carry various kinds of inductive loads, such as motor, air conditioner, electric drills, fluorescent lamp, gas lamp, etc; 8, With high quality, low frequency circuit design, stable system, low failure rate and long service life normally under proper operation, this machine can last more than 3 years; 10, Approvals: CE / EMC / LVD/ RoHS ; 11, Two years warranty, lifelong technical supports. Technical Specification: I-P-XD-15000VA Rated output capacity(Full Power) 10000W Peak Power 20000W Battery voltage(DC) 96V or 192V (Optional) AC Input Voltage(AC) 220V, 35% or 110V+35%(Optional) Frequency 50Hz, 3% or 60Hz, 3% Output(AC) Voltage 220V, 3% or 230V, 3 or 240V, 3% or 100V, 3% or 110V, 3% (Optional) Frequency 50Hz, 0.5 or 60Hz, 0.5(Optional) Charge Battery Charge circuit 0~25 A Charge time By the capacity of battery Battery protection Automatic self-test. charge and discharge protection Display Mode LCD Information Input voltage, Output voltage, Frequency, Battery capacity, Load capacity State parameters Output wave type Pure sine wave (Waveform distortion 3) Overload capacity 120% 60s,130% 10s Inverter efficiency Average 90% Transfer time 5ms Communication port RS232 Protection function Output overload protection, Output short-circuit protection, Battery reverse polarity protection, Input high-voltage protection , Input low-voltage protections, Overheat protection; Using environment Temperature -10 ¡«60 Humidity 10%¡«90%,Non-condensing Altitude 4000m Size W, D, H(mm) 570*265*600. Packing size W, D, H(mm) 660*350*750 Net weight (kg) 78 Gross weight (kg) 88=78+ 10 (wooden case).

Top Level Quality Pure Sine Wave Inverter With battery charger & UPS I-P-TPI series CPU intelligent management, Latest American technical inverter, Adopted best electric components, stable quality, long-life The high conversion efficiency ( 87%-98%) Low power consumption,1W~6W under sleep state. I . Introduction This power inverter series is a member of the most advanced line of mobile AC power system available. This design combines the advantages of top class inverters in the world global market and adopts latest American low frequency circuit design. The features are high conversion efficiency, high performance and lowest consumption. The models range from 1000W-6000W. II . Application: It supplies reliable pure sine wave power for various loads in various fields. This design is special for using in solar & wind system with excellent conversion efficiency. Application loads: various loads such as resistive load, inductive load, motors and rectifier load, like team ship, truck, industrial equipment, air conditioning, television, cash register, refrigerator, computer, electric power tool etc. Application fields: It can be used in every field, such as business, working station, home, industry fields etc. III. Production Functions: 1. DC/AC Conversion Function: With advanced conversion technologies, the machine owns strong overload ability, high conversion efficiency. It is suitable for high demand industry, such as manufacture, energy industry and so on. 2. High-power Intelligent charging function: 1). It can charge for all kinds of batteries. For more details please check the parameter of the product. Remarks: standard matched battery is free maintenance lead-acid battery. If lithium battery, we need to reset the parameter of the inverter according to the specification of customers' battery. 2). The maximum charge current for DC 12V input is 40A, for DC 24V/48V is 70A.It can be adjusted by the users. The charging process can be divided into three stages. Stage I: With largest constant current charging, this can improve the backup power. Stage II: Constant voltage charging to charge batteries gradually, then there is enough time for batteries to absorb energy .Therefore, battery electrodes are protected and battery overcharge can be avoided. Stage III: When the batteries are fully charged, the output of inverter will turn into float voltage to maintain full power state of batteries for a long time. Meantime, it would auto detect the battery power, and stop working for saving electricity after finished charging. 2. UPS Function: When this inverter connected with batteries and utility, it is made up of UPS system, which can make sure the loads keep working after the utility cut off suddenly. Step 1: When utility power is available, it will output directly after stabilizing voltage and charge batteries simultaneously. Step 2: When utility power cuts off, the system will convert DC power to AC power automatically to ensure uninterrupted power supply within 4ms. Step 3: When utility power comes back, the system will turn into utility power supply automatically and charge batteries simultaneously. 3. Sleep Function: No load power is between 1W-6W when on sleep mode and only the chip works. This inverter will automatically loop detection under the sleep mode, when the connected loads power more than 30W, the system will automatically start to work and turn into normal mode within 20S for providing power to the loads; when the loads power less than 30W, the machine will back to sleep mode automatically within 20S.This can largely reduce the waste of electricity .It is a special design for saving energy. 4. Products Features: 1. Pure sine wave output. 2. Built-in transfer switch automatically transfers between inverter power and incom- ing AC power. 3. CPU management, intelligent control, module design. 4. LEDs display function; 5. High conversion efficiency (between 87%-98%)/ low no load consumption. 6. Can match with all kinds of batteries, such as sealed lead acid battery, open lead- acid battery, gel battery and kinds of lithium batteries. 7. Three-step intelligent charging mode available. It charges all kinds of batteries intelligently. And the maximum charging current is adjustable. It also can be used as a charger. 8. This series inverter is also called dynamic inverter according to the advantage of strong overload capacity. For example, 1KW model can drive 1P air conditioning, 2KW can drive 2P air conditioning,3KW can drive 3P air conditioning etc. 9. With adopting latest American low frequency circuit design, and new electric materials, the whole system is more stable, low malfunction rate, long-life.It is no problem to use for more than 5 years under the normally use. 10. 3-year warranty plus life-time service. 5. Protection: High voltage protection Under-voltage protection Over-temperature shutdown Automatic overload protection Short-circuit protection 6. Parameter: I-P-TPI series Model 1000W 2000W 3000W 4000W 5000W 6000W DC input DC12V/ DC24V/ DC48V Optional DC 24V/DC48V Optional Utility Model Specifications Input Wave Type Sinusoid (utility or generator) Nominal Input Voltage AC 100V/110V/220V/230V/240V ( Optional) Input Voltage Range AC75V~135V or AC184V~AC253V Nominal Input Frequency 50Hz or 60Hz (Optional) Input Frequency Range 47+0.3Hz~55+0.3Hz 50Hz or 57+0.3Hz~65+0.3Hz 60Hz ; Output Wave Type Same as the input wave type Overload Protection Circuit breaker startup Short Circuit Protection Circuit breaker startup Power Efficiency >98% Transfer Current 30A Transfer Time (Ac to Dc) 4ms Transfer Time (Dc to Ac) 4ms Bypass switch current YES Max Overload Current of Bypass 30A Inverter Mode Specifications Rated Output Power (W) 1000W 2000W 3000W 4000W 5000W 6000W Power Factor 1 (Sufficient output power) Nominal Output Voltage (V) 100V/110V/220V/230V/240V AC(Optional) Nominal Output Frequency (Hz) 50Hz 0.3Hz or 60V , 0.3Hz Output Voltage Range 5% Efficiency 87%~98% Over-Load Protection (110%

This type CT is designed for easyinstallation in tight spaces and environment without removing the main busbaror cable .The connector uses the holding pressure of folding structure. Safetyisolation to protect the user from direct contact with the electrifiedbody.Meet the 600V,CATIII secure degree. Features: .Flexibleand light weights,exquisite appearance .Easily&quick installation in tight spaces .Excellentlinearity .Maximummeasuring current up to 550A Applications: .Power quality monitoring .Smart logger .Distributed measurement systems Mechanical Dimension: 462.png Technical index: Item Parameter Rated Primary 500A AC Output voltage 1Mv AC/A Amplitude Accuracy ±0.3%rdg. ±0.01%f.s.(f.s:500A,45Hz-66Hz,primary conductor in the center) Phase Accuracy ±0.5º(10-100%IIn )(45Hz-5kHz) The Amplitude Frequency Characteristic ±1%(45Hz-5kHz)(Deviation Accuracy) Conductor Impact ±0.5%(off-center) The influence of external electromagnetic fields =0.1A(In AC 400A/m electromagnetic fields) Maximum input current 550A AC Continuous (45-66Hz,Ambient temperature50º C Temperature Coefficient 0.02%reading data /º C Dielectirc strength 5312V ACrms/continue15seconds(circuits-iron core) The Maximum rated voltage 600V crms Operating temperature &humidity 0 to 50º (32-122º F), =80%RH(NO condensate) Storage temperature &humidity -10º C to60º C(14-140º F), =80%RH(NO condense) Indoors operating environment ,UP to 2000m above sea level Applicable Standards Safety:EN 61010-2-032:2002,CATIII ,Contamination II EMC:EN 1326:1997+A1:1998+A2:2001+A3:2003(classA) Measurable conductor diameter =Ø46mm Cable Length About3M Dimension About 79W*159H*40Dmm (Excluding Protruding parts) Weight About 380G

Most load types in power system belong to inductive load. In addition, power electronic devices are widely used in power enterprises, so the power factor of power grid is low. Lower power factor reduces equipment utilization ratio, increases power supply investment, damages voltage quality, reduces equipment service life, and greatly increases line loss. In order to improve the energy waste caused by the low power factor of power grid and these unfavorable factors of power supply production, it is necessary to effectively improve the power factor of power grid. Obviously, it is unreasonable and usually impossible for these reactive power to be supplied by generators and transmitted over long distances. Reasonable way is to generate reactive power where reactive power is needed, that is, to increase reactive power compensation equipment and devices. II. Structure Composition Generally speaking, low price Capacitance Compensation Cabinet is composed of cabinet shell, bus, circuit breaker, disconnector, thermal relay, contactor, lightning arrester, capacitor, reactor, primary and secondary conductor, terminal row, power factor automatic compensation control device, panel instrument, etc. III. Basic Principles In the actual power system, most of the loads are asynchronous motors. The equivalent circuit can be regarded as a series circuit of resistance and inductance. The phase difference between voltage and current is large and the power factor is low. After shunt capacitors are connected, the current of capacitors will offset part of the inductance current, so that the inductance current decreases, the total current decreases, the phase difference between voltage and current decreases, and the power factor increases. A reactive power automatic controller is installed in the compensation cabinet, which automatically puts in or removes capacitors according to the load force rate. The main function of the controller is to make the load close to the required reactive current, thereby improving the power factor. For enterprises, the main reason is to avoid the penalty of power factor not up to the standard (0.9).

Beta Power Controls, Coimbatore, India an ISO 9001:2015 TVE accredited company, leading manufacturing & Exports of Industrial Voltage Stabilizer, Isolation Transformers, Frequency Converter ,Two phase to three phase converter, Variable Transformer, Rectifiers energy saving equipment in India . Our products are well appreciated world over and received much recognition for their quality. Established in 2007 with a corporate objective to provide efficient energy for greener future,Beta power controls has grown to be one of the countryâ??s biggest manufacturers of power saving and power conditioning equipmentâ??s with the largest satisfied customer base. The products manufactured by us have made a distinct place in the market owing to their features like excellent performance, longer lifespan and less power consumption. With an objective to manufacture quality products, our experts use the latest equipment and best quality raw material provided by our trusted vendors of the market. We regularly Exports to Servo voltage Stabilizer in sudan.We are successfully meeting the varied requirements of our clients by providing the best quality range of 60kVA Oil Cooled Servo Stabilizers offered comprise highly functional Voltage Stabilizers that are designed using latest technology support so as to provide for optimum functional usage. These Voltage Stabilizers find extensive usage in controlling voltage fluctuations using solid state electronic circuitry. Being oil cooled stabilizers, these function as automatic line voltage correctors that use the synchronous motor that provides for optimum functional usage. Features: High efficiency & Fast response Wide input voltage range trip conditions 99.99% failure proof control circuit No over under, shoots and hunting Built in by pass switch up to 300 kVA Less active component avoids failure ratings Special electronic circuit to operate on gensets No effect of power factor and frequency variation The Voltage at speed related to the rate of fluctuations and avoids oscillations & hunting In AC motor drive Variable speed high torque ac servo motor proportionally controls corrections Separate isolated PCB for triac switching for the motor Protection: Input and Output Low/high Voltage protection. Phase rotation/single phasing preventer. Input protection using mcb / mccb. Output overload protection Surge control protection Input voltage range: Range I: 360 - 480 V Range II: 340 - 480 V Range III: 310 - 480 V *The input voltage, output voltage, frequency and phase can be custom made.

High frequency generator 1.Introduction: High frequency generator named radio frequency generator also. It is the core part of high frequency machinery. Different frequency- 6.78mhz, 13.56mhz, and 27.12mhz can be widely used for woodworking (plywood bending, glue curing, timber drying), grain worm killing, freezing meat melting, and environment protection field.  High frequency generator generates electromagnetic fields between two electrodes through three phase alternating current. In this field, water and glue molecules are polarized - rotated - heated by friction.  high frequency heating is not like conductive heating, which heat material step by step, but help object heated themselves by friction. This is called high frequency dielectric heating-quickly, efficiently and evenly. Besides, there are more advantages in high frequency heating: 1). Easy to control: once cut off power, no heating anymore; once power on, heating works wholly. 2). Low heating loss, energy saving. 3).Environment friendly: high frequency is clean power, dust free. 4).Hf power can kill worm and bacteria in the material like timber and grain. 2.Parameter: Model, hf20-6-ii-ch, hf30-6-ii-ch Power supply, ac 380 v, 50hz, 3 phase four wire Input power, 30kva, 45kva Output power, 20kw, 30kw Frequency, 6.78mhz/ 13.56mhz/27.12mhz Radio tube, fu834 fa, fu924 fa Commutate type, three phase full wave silicon commutate Cooling type, forced air cooled Tuning type, variable capacitance Protection, overload protection, wind pressure protection, door switch protection, filament warm up protection Output type, one/two outputs, one/two outputs Overall size, l1100xw900xh1900mm, l1100xw950xh1950mm Total weight, 700kg, 800kg