Polynum Ultra:
Pure aluminum foil laminated with two layers of double polyethylene Big bubbles (8mm each layer, Fire Retardant) and internal reflection layer.
The 16mm multi-foil/bubbles structure is laminated with two reflective aluminum layers (95% to 97% reflectivity) for maximum radiant heat reflection (low radiant heat absorption) with a tested Emissivity of 0.03 to 0.05.
Our high resistance anti-corrosion treatment is applied to all Polynum products for durable performance under all climate conditions including coastal areas, high humidity, livestock buildings.
Optional: 18 microns aluminum with bi-directional reinforced netting for extra strength.
Polynum ULTRA Advantages:
***** HighThermal resistance (R-value 3.72)
***** Lightweight- therefore easy to apply * High performance * Moisture-proof, fungus, and mold-free
***** Does not attract nesting, rodents, birds, or pests* * Does not collect dust, does not retain bacteria, odors nor dirt.
***** Friendly User & Safe: No protective equipment such as gloves or breathing equipment is required for installation
****Hypoallergenic, non-crumbling material, no airborne microparticles, does not create respiratory problems.
**** Cost Effective
Polynum Big: Thermal Reflective insulation 8.00mm thick consists of a polyethylene bubbles layer laminated with two aluminum reflective layers (95% to 97% reflectivity) for maximum radiant heat reflection (low radiant heat absorption) with a tested Emissivity of 0.03 to 0.05. Our anti-corrosion treatment is applied to all Polynum products for durable performance under all climate conditions including coastal areas, high humidity areas, livestock buildings. Polynum BIG Advantages: **** High Thermal resistance (R-value) **** Moisture-proof, fungus and mold-free **** High performance **** Does not attract nesting, rodents, birds, or pests. ****Does not collect dust, does not retain bacteria, odors nor dirt. **** Lightweight **** User-friendly No protective equipment such as gloves or breathing equipment is required for installation **** Hypoallergenic, non-crumbling material, no airborne microparticles, does not create respiratory problems. **** Eco Friendly Polynum Big Applications : Thermal insulation in industrialized roofs according to the existing construction Thermal insulation in tiled roofs combined with a dust barrier Thermal insulation in walls with two layers; gypsum finish, board cement, plasterboard, etc.
Polynum Super: Thermal Reflective insulation 4.00mm thick consists of a polyethylene small air bubbles layer laminated with two aluminum reflective layers (95% to 97% reflectivity) for maximum radiant heat reflection (low radiant heat absorption) with a tested Emissivity of 0.03 to 0.05. Our anti-corrosion treatment is applied to all Polynum products for durable performance under all climate conditions including coastal areas, high humidity areas, livestock buildings. Polynum SUPER applications: * Polynum Super allows insulation to be installed on an industrial roof, tiled roof, double brick walls, and inside gypsum walls, cement boards, and more. * Allows a solution as vapor barriers on flat roofs or as reflectors under underfloor heating and a unique solution for acoustic and thermal insulation under the flooring. * Polynum Super is suitable for application in both new construction and renovations, building improvement, and home restoration. Cost-Effective Energy Saving Safe to Handle Easy to Install
"ISO" in the context of polyisocyanurate insulation typically refers to the insulation material's type or category rather than an acronym. Polyisocyanurate is a type of rigid foam insulation known for its high thermal resistance (R-value) and effectiveness in providing thermal insulation.
XPS Insulation (Extruded Polystyrene): "XPS" commonly refers to extruded polystyrene insulation. This type of insulation is known for its closed-cell structure, providing good thermal resistance and moisture resistance. It is often used in various construction applications, such as insulating walls, roofs, and foundations. B1 Fire Rating: The "B1" component might refer to a fire rating. In some fire classification systems, materials are rated based on their fire resistance, and "B1" could indicate a certain level of fire resistance. For example, in the European fire classification system (Euroclass), B1 represents a material with limited combustibility.
Supplier: Refractory bricks, high alumina bricks, fire clay bricks, sk 34 fire bricks, sk 36 fire bricks, acid resistance bricks,insulating bricks, hfk bricks, cfi bricks, special shaped refractory burner block, refractory tiles, refractory tundish well blocks, refractory nozzle, refractory castables, medium purity high purity castables, low cements castables, refractory mortar, refractory cements, ceramics fiber blankets, ceramics fiber boards, crushed refractory bed materials, bottom pouring sets
Services: Manufacturer & exporter refractory bricks, high alumina bricks, fire clay bricks, sk 34 fire bricks, sk 36 fire bricks, acid resistance bricks,insulating bricks, hfk bricks, cfi bricks, special shaped refractory burner block, refractory tiles, refractory tundish well blocks, refractory nozzle, refractory castables, medium purity high purity castables, low cements castables, refractory mortar, refractory cements, ceramics fiber blankets, ceramics fiber boards, crushed refractory bed materials, bottom pouring sets
Bubble / Foam insulation provides the maximum efficiency in controlling heat transfer as the air space built between the layers of foil works to keep radiant heat from penetrating a structure from the outside, and the radiant foil reflects interior heat back into a structure from the inside. Even though you get single bubble and double bubble insulation and 5mm to 25mm EPE Foam insulation. Technical Specifications: Three layer of air bubble film laminated with both side silver metalized aluminum film. Our Product is Specially Designed for construction, container insulation. insulated bags manufacturing etc. Standard Size : 1.2mtr x 100mtr Bubble Size : 4mm x 10mm Nominal Thickness : 3.5 to 4mm Reflection Ratio : 96% Thermal Resistance Emissivity : 0.04-0.05
We have facade insulation board,terrace roof insulation board,partition wall,industrial insulation board,industrial rolls in our product portfolio.
Hothree company is a professional thermal interface materials distributor of BERGQUIST(USA) and DENKA (Japan), which located in Shenzhen China and was established in 2011. We have standing stock for commonly used models , which greatly shortens the lead time for customers.We can provide very competitive price.The commonly models such as: BERGQUIST SP900S,GPVOUS,Sil-Pad900S, Sil-Pad2000, Gap-Pad VO Ultra Soft,Gap-Pad5000S35, Bond-Ply100,HF300P and others are always in stock.
Rockwool, also known as mineral wool, is an insulation material made from natural stone or mineral fibers. The density of Rockwool refers to the mass of the material per unit volume, and it is commonly expressed in kilograms per cubic meter (kg/m�³) or pounds per cubic foot (lb/ft�³). The density of Rockwool can vary depending on the specific product and its intended application. Common densities for Rockwool insulation products range from approximately 40 kg/m�³ (2.5 lb/ft�³) to 200 kg/m�³ (12.5 lb/ft�³) or more. The choice of density often depends on factors such as thermal performance requirements, structural support needs, and the specific application of the insulation.
