Commercial Fan

Industrial and Commercial Grade ...High Air Velocity ... Durable Construction

Strong Force Electric Fans are commonly used in the workshops, warehouses, basements, canteens, etc to prevent sunstroke and lower temperature.The ambient temperature should not surpass 40 deg C,and there should be non-corrosive gas and no granulated dust in the air.The fans are mainly composed of motor,swinging part,blades,net enclosures and wall-mounting or standing holders.The Aluminum blades have been static balancing corrected and run steadily.

Supplier: Commercial Kitchen Equipment, Industrial Conveyor System, Cooling Systems; Agriculture Products.

Supplier: Industrial fan, exhaust fan, commercial fan and axial flow fan

Supplier: Fans like commercial ceiling fans and table fans

Mist Fans Mist Fan (AM-650GB) Mist Fan design principle The mist fan was designed with the advanced principle of double atomization. The water drips are jetted under the diffusion of the rotating plate and atomized equipment; reduce the diameter of the atomized water drip to 10 um under the centrifugal force. Hence improve the atomization surface area. The atomized water drips are jetted out with gas flow and it improves the surface speed of liquid greatly, speedup the diffusion of the gas molecule, therefore increase the quantity of the evaporation. Also the evaporation absorbs the heat and decreases the temperature, improves the relative humidity and reduces the dust. Main parts (1) Fan motor (2) Impeller (3) Fan guards (4) Jet plate (5) Water tank (6) Pump (7) Standing pole (Ground) (8) Push pedestal (Ground) (9) Switch box (Wall) Parameter (1) Dimension: 650 mm (26inches) (2) Voltage: 220 ~ 240V (3) Fan height: adjustable from 1700mm to 2000mm (4) Fan oscillation adjustable: 90 degrees automatically (5) Fan tilt adjustable: 30 degrees (6) Available area: 50 square meters (7) Temperatures drop: 4 íµ- 8 íµ (8) Operation Temperature: 20 íµ- 80 íµ (9) Operation Humidity: 20% - 85% (10) Quantity of atomization: 0 - 8L/h (11) Diameter of atomized drip: < 10 um (12) Capacity (Ground):38 L (13) Jet distance: 8 m (14) G.W: 24.4KG; CBM: 0.118M3 Characteristics (1) Thin atomized water drips, long range of spraying, no water dropping. (2) No special demand of the quality of the water and water pressure. (3) Single used, fine enginery, more agile, wide range of using. (4) Easy to install, convenient to move. (5) 90 degrees oscillation, three speed control, blowing without atomization. (6) Waterproof electric design, safe use (7) Adjustable misting volume, low noise Application The atomized fan was widely used in the public situation without air-condition such as store, wine floor, plant, mill, medicine shop, hothouse canopy, fowl house, fungus planting, tea processing where need ventilation, reducing heat and improving humidity. Advantage (1) Compared with the foreign product, we adopt the high quality material---rustproof steel, overcome the problem of dirty forming and cleaning. (2) Compared with the atomized system with nozzle and plenum pump, our mist fan can't be blocked and without high pressure. (3) No need to maintenance, saving power and water, with lower cost, compared with the system with central air-condition and jet house. (4) Overcome the disadvantage of large air resistance and slow reduction of temperature compared with the system of wet shade. We can also supply: (1) Mist fan AM-650GH; (2) Mist fan AM-650GT; (3) Mist fan AM-650W; (4) Mist fan AM-650C; (5) Mist fan AM-702F20 it include four boxes: (1)Box 1:POLE 125CM*8CM*15CM (2)Box 2:WATER TANK 47CM*42CM*43CM (3)Box 3:GUARDS AND IMPELLER 72CM*72CM*7CM (4)Box 4:FAN MOTOR,PUSH PEDESTAL,JET PLATE,WATER PUMP 72CM*52CM*20CM

Supplier: Domestic and commercial fans, ventilation grilles, flexible and rigid air ducts, joining elements, access doors, disk valves and diffusers

Supplier: All automobiles spares parts (car ,commercial, tractor ) ball bearings , diesel exhaust fluid, car horns, tata passenger car parts ,maruti car parts , tata commercial vehicle parts . exporter of indian handicraft , indian kosa sarees, etc

Industrial exhaust fans, also known as commercial exhaust fans, are used in a multitude of locations. Whether you have a barn, hall, factory, workshop, shop, greenhouse, shed or any other type of space, they definitely come in handy. Below are a range of products that show the best exhaust fans you can buy. Reviews are also a great indicator about the true operation of the fan and are highlighed with each fan. This page shows a whole range of different exhaust and shutter fans: some have have automatic shutters, some run quieter, and some push around huge air so you can choose one that's right for you. These exhaust fans are used to control the interior environment by taking out particulates, odours, moisture, smoke and other pieces of matter which may be in the air. These fans act to primarily take matter, such as dust or gas and remove it to an external space. These fans can also be implemented into systems for heating and cooling. While regular fans can be used in more domestic applications, the industrial variety are used for larger spaces. They typically need more power, are larger and can apply larger exhaust capacity. For example, exhaust fans are used in some woodwork shops to ensure the sawdust and other fine particles are removed from the environment so people don't inhale the particles. These may also be installed in residential type places, to be used as a fan, or exhaust system in a building's attic, used to circulate air in the building or home. They can sometime sometimes be confused with attic ventilators, which just exhausts hot air from the attic to the outside though an opening (unpowered). Restaurants rely on exhaust fans to keep their kitchens clear of smoke or fumes from cooking. Application 1. Covering large area with constantly moving air. 2. Create an evaporative cooling effect. 3. Energy savings with low power by Permanent Magnet Brushless Motor 4. industry;Station;Cargo;Plaza;Hall;Office;Gym / indoor playground / training room/industry