Penetration Grade Bitumen is a standard bitumen usually used as a Paving Grade Bitumen essential for road construction and the production of asphalt pavements with superior properties, and it's very important once it bounds the aggregates and creates a unique cohesion and stability to the bituminous mix.
This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses.
Grades of penetration bitumen:
The most popular grades are; grades 40/50, 60/70, 80/100, 85/100, and 100/120. We are also capable of producing other grades of Penetration Bitumen upon request by our customers.
Penetrating Bitumen Ideal for pavements, offering excellent penetration grades that contribute to the strength and longevity of road surfaces.
Superior Quality Penetrating Bitumen sourced from the best refineries, our bitumen meets international standards for quality consistency. Available grades, 40-50 , 60-70 , 85-100 , 120-150 , 200-300 with strong logistic network, we guarantee timely and secure delivery to your projected port.
Bitumen Penetration Grade (Astm, En & Ip Standard)
Bitumen Penetration Grade 80/100 is a standard penetration grade Bitumen usually used as a Paving Grade Bitumen suitable for road construction and for the production of asphalt pavements with superior properties. This grade of Bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses. Penetration Grade Bitumen supplied by ASI GLOBAL TRADE is petroleum grade bitumen, manufactured from fractional / vacuum distillation of crude oil. The Bitumen supplied by ASI GLOBAL TRADE is produced from vacuum residue (short residue) feedstock. Penetration Grade bitumens are specified by the penetration and softening point test. Designation is by penetration range only. The penetration grade bitumens have a thermoplastic property which causes the material to soften at high temperatures and to harden at lower temperatures. This unique temperature/ viscosity relationship is important when determining the performance parameters such as the adhesion, rheology, durability and application temperatures of bitumen. SPECIFICATIONS : CHARACTERISTIC TEST METHOD UNIT MIN. MAX. Specific gravity at 25°C ASTM D70 °C 1.01 1.05 Penetration at 25°C ASTM D5 mm 80 100 Softening Point ASTM D36 °C 42 52 Ductility at 25°C ASTM D113 Cm 100 - Loss on heating ASTM D6 % 0,5 Flash Point ASTM D92 °C 225 Solubility in Trychloroethyelene ASTM D2042 % 99 Performance after RTFOT Method Test to ASTN D1754: - Change in mass (m/m) ASTM2872 % - 0.5 - Retained Penetration 25°C, 100g, 5s (% of original) ASTM D5 % 50 - - Increase in softening point ASTM D36 °C - â?¤8 - Softening point after hardening ASTM D36 °C 45 - LEGAL NOTES The information, and, in particular, the recommendations relating to the application and end-use of ASI GLOBAL TRADE products, are given in good faith based on ASI GLOBAL TRADE current knowledge and experience of the products when properly stored, handled and applied under normal conditions in accordance with ASI GLOBL TRADE recommendations. In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchant-ability or of fitness for a particular purpose, nor any liability arising out of any legal relationship whatsoever, can be inferred either from this information, or from any written recommendations, or from any other advice offered. The user of the product must test the products suitability for the intended application and purpose. ASI GLOBAL TRADE reserves the right to change the properties of its products. The proprietary rights of third parties must be observed. All orders are accepted subject to our current terms of sale and delivery. Users must always refer to the most recent issue of the local Product Data Sheet for the product concerned, copies of which will be supplied on request.
IRAN BITUMEN GRADE 60/70 Bitumen penetration grade 60/70 is semi-hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with the below technical specification. This grade of bitumen is mainly used in the manufacture of hot mix asphalt for bases and wearing courses.Bitumen 60/70 is most used bitumen grade and basic material for all other bituminous products.
Commodity: BITUMEN GRADE 60/70 Typical Specifications: See Below Image Trial Quantity (Required): 10,000 Metric Then Quantity per month: 10,000 Metric to 85,000 Metric Tons per Month Contract Duration: 12 months (with possible rollovers and extensions). Price: CIF price C.I.F. INCOTERMS 2020 will be provided on receipt of Buyers LOI Terms: Cost Insurance and Freight (CIF) (INCOTERMS 2020). Origin: Kazakhstan. Destination Port: Buyers Nominated Destination Sea Port East Asia Port. or Europe Sea Ports Note: Please ensure the Buyers have made prior arrangements for Tankage at the Destination Sea Port for the said shipments so on docking the tanker can pump the goods to shore. Also, if the Destination Port cannot accept monthly single shipment it can be shipped in smaller Tankers. Inspection: Certificate of Quality for the available goods issued by Gost Standard Kazakhstan. or equivalent by Seller at Sellers expense. Packing: Bulk, Insurance: 110% of monthly invoice value. PB: 2% paid by Seller on receipt and acceptance of SBLC or Bank Guarantee.. Inspection: Discharge Port by SGS, or Independent International Assayer at Buyers expense. Payment: Payment for the goods sold Trial and Monthly quantities are to be made in United States Dollars.. Buyer Bank issues within 3 banking days, Bank to Bank via SWIFT MT 760 SBLC or Bank Guarantee worth 100% of the monthly shipment value in USD valid for 45 days, and full monthly payment in USD to be made by MT103 /Telegraphic Wire Transfer within 3 banking days after received inspection report at destination port.
Bitumen known as asphalt in parts of the world, is a hydrocarbon material. It has high viscosity and colloidal structure, and black to dark brown color. It's dissolvable in carbon disulfide and carbon tetrachloride. It is impenetrable to moisture and water, electrical insulation, elasticity, moderate resistance against acids, bases and salts. Its adhesions to other materials are the most important features of bitumen. Bitumen 60/70 is used for road construction projects in temperate regions. It can be used to produce some of the basic layers of asphalt and insulation. Technical and grades specification are available upon request.
-Standard penetration bitumen in several grades:40/50 - 50/70 - 60/70 - 70/100 - 80/100 - 85/100, … -Oxidize bitumen -Cutback bitumen -Gilsonite : 5-10-15-20-25 % ash Drums / tanker / bag
Bitumen Product Description : Bitumen is widely used in the construction of asphalt roads and bituminous membrane products. Bitumen is commonly used to build highways, motorways and rail networks. Bitumen has excellent water-proofing properties and is widely used for making roofing products along with a range of other household and industrial applications, from emulsion paints to sound-proofing. Penetration Bitumen and Bitumen Emulsions are used for the construction of railway tracks and by using special types of bitumen such as Polymer Modified Bitumen, the vibration and noise levels are reduced due to a dampening effect. Bitumen has been proven to be effective on both high-speed railway tracks and heavy load railway tracks. Bitumen is also used for surfacing airfield runways and air strips (PMB is preffered due to its fuel resistant properties) and taxi ways. For the Marine construction industry bitumen is used for hydraulic applications such as canal lining, underwater tunnels, river bank protection, dam construction and sea defences. There are also numerous industrial applications like roofing felt material, printing inks, packaging paper, linoleum, electrical cable / Junction box insulation, mastic for roofing of terraces, and duplex paper manufacture. Price of product ( USD price or FOB price) : 3.000 MT monthly market price. 10.000 MT monthly market price Less 5%. Product origin : Russia and Non Russia Key Specifications/Special Features : Specifications for types/grades of Oil Bitumen according to buyer specifications and/or will be given upon received buyer credible purchase request in the form LOI/ICPO docs. Minimum Order Size and Packgaing details : MOQ 3000 MT Bulk in tanker vessels. Drums 150/180/200 Kg. Jumbo bags 1000 Kg. Poly bags 32 Kg. Tanks 20 MT.
