* We manufacture a wide range of Process Ball Valves in single, two, and three-piece constructions.The valves are available in full-bore and regular-bore designs, in a variety of end connections and materials to suit customer requirements.
* The valves are of floating-ball design where the ball moves towards the downstream seat,
under pressure, to effect a tight seal.Trunnion-mounted Ball Valve design complies to API 6D
* Wide portfolio of Side-entry and Top-entry designs
* Fugitive emissions - Soft and Metal seated valves complies to ISO 15848-1, Class AH and BH
* Firesafe design - to API 607 and API 6FA
* CE Marking - Meets requirements of Pressure Equipment Directive 2014/68/EU,
Pneumatic shell test conducted at 1.1 times rated pressure to check shell integrity, when required
* Double block and bleed (DBB) feature - Valves are designed and tested for automatic
* cavity relief
* Anti-blowout stem design
* Coil springs used for consistent seat loading and lower operating torque
* Lip seals provided for low temperature services
* Primary O ring and Secondary graphite (in 3 stage stem, thrust washer is primary)
* Wide portfolio of Side-entry and Top-entry designs
* Options: Buried service, Cryogenic
* Offered with Electric, Pneumatic and Hydraulic Actuators
* In-house Tests Capabilities
* Fire-safe to ISO 10497 and API 607
* Mirror-finished solid stainless ball
* Fine-grained PTFE seats
* Cavity Pressure Relief mechanism
* Blowout-proof stem
* High integrity stem sealing â?? Belleville springs compensate for wear and thermal expansions
* Size 2" to 56" (50 mm to 1400 mm)
* ASME Class Class 150 to 2500
* Design Standard API 6D
* Size ¼" to 8" (8 mm to 200 mm)
* ASME Class Class 150 to 2500
* Design Standard ISO 17292, API 608, API 6D
* Antistatic feature
* Actuator-mounting flange conforms to ISO 5211
* Single, two and three piece constructions
* Full-bore and regular-bore designs
* Soft and metal-seated
* Offered in carbon steel, stainless steel and duplex stainless steels
* Screwed, socket-weld and flanged ends
* ASME classes up to 2500
* Variety of actuation option
Ball Valves Screwed / Socket Weld / Butt-weld / Flanged Ends : Ball valves are designed and manufactured to provide maximum service life and dependability. Three Piece and Two Piece design Ball Valves ensure efficiency, reliability and economy. Pneumatic Operated Ball Valves and Electrical Actuated Ball Valves are maintenance friendly and suitable for on-line maintenance . Butterfly Valves High Performance Butterfly Valve 150LB/300LB/600LB ,wafer type with integrally moulded elastomeric body sleeve are designed for longer life and trouble free performance. Gate Valves ATSIPL distributes a full line of Gate Valves, including Wedge Gate Valves, Knife Gate Valves, Lined Gate Valves, Resilient Seated Gate Valves and more. Gate Valves are available from 1/2â?³ through 24â?³ and larger in various material options.
Valve types: gate valve, globe valve, check valve, butterfly valve, ball valve, regulating valve, safety valve, diaphragm valve, drain valve, etc Valve body material: carbon steel, stainless steel, alloy steel Diameter: 1/2-24 (DN15-DN600) Pressure range: Class150~2500 (PN10~PN420) Connection method: RF, RTJ, BW Working temperature: -29 ~560 Operation mode: handwheel, worm gear, electric, etc
Areas where highly corrosive materials are used in the chemical process and plants. Industries where the critical application like food, pharma and fine chemicals. To control environment pollution. FEATURE Best quality in class with excellent performance. Excellent corrosion resistance to the chemicals. Maintenance Free / Long Service life cycle / Easy Installable, ensuring cost reduction in production and maintenance. QUALITY CONTROL High Voltage electric spark test - all lined components. Standard Hydraulic Test (15 kg/cm\') of Body and seat (10 kg/cm�³) Virgin lining materials used-FEP/PFA. Size: 15 NB to 200 NB LINNING Thickness :3.0 to 3.5 mm Mini. Over all wetted parts. Spark Test :15k.v.D.C. Type Service :Teflon�® FEP/PFA :Teflon (FEP) Max-160�°C Temp. :Teflon (PFA) Max-205�°C
MATIREAL - CAST IRON / CAST STEEL / STAINLESS STEEL 304/316/316L / WCB BALL - STAINLESS STEEL 304 / 316//316L STEAM - STAINLESS STEEL 304/316 GLAND NUT - 304 / 316 STAINLESS STEEL SEAT - PTFE/CTFE/GTFE SIZE - 1/4 INCH TO 4 INCH
MATIREAL - CAST IRON / CAST STEEL / STAINLESS STEEL 304/316/316L / WCB BALL - STAINLESS STEEL 304 / 316//316L STEAM - STAINLESS STEEL 304/316 GLAND NUT - 304 / 316 STAINLESS STEEL STUD NUT - STAINLESS STEEL 304 SEAT - PTFE/CTFE/GTFE
MATERIAL - CAST IRON / CAST STEEL / WCB / STAINLESS STEEL 3O4/316/316L BALL - STAINLESS STEEL 304 / 316 STEAM - STAINLESS STEEL 304/316/ GLAND NUT - STAINLESS STEEL 304/316 LEVER - STAINLESS STEEL 304 SEAT - PTFE / CTFE / GTFE STUD NUT - STAINLEES STEEL 304
Valves are supplied in 2/3 piece designs and connections as per customer requirements. Available with Teflon, Delrin, Peak seats. Range : 1/8" to 1" threaded. 1/8"OD to 1"OD, 4mm OD to 25mm OD End connections: BSP/NPT/BSPT MOC : SS 304, SS 316, MONEL, HASTALLOY, TEFLON, C
Areas where highly corrosive materials are used in the chemical process and plants. Industries where the critical application like food, pharma and fine chemicals. To control environment pollution. FEATURE Best quality in class with excellent performance. Excellent corrosion resistance to the chemicals. Maintenance Free/Long Service life cycle / Easy Installable, ensuring cost reduction in production and maintenance. QUALITY CONTROL High Voltage electric spark test-all lined components. Standard Hydraulic Test (15 kg/cm\') of Body and seat (10 kg/cm�³) Virgin lining materials used-FEP/PFA. Size: 15 NB to 150 NB LINNING Thickness Spark Test Type Service Temp. : 3.0 to 3.5mm Mini. Over all wetted parts. : 15k.v.D.C. : Teflon FEP/PFA : Teflon (FEP) Max-160 C : Teflon (PFA) Max-205 C
Valves, Gate valve
