Product Description :
Manufacturer and Supplier of Autoclaved Aerated Concrete (AAC) Blocks.
Product origin :
Pune,mumbai, Gujrat, India
Key Specifications/Special Features :
1density+10% moisture450 â?? 850+10%kg/m3 compressive strength3.0 5.5mpa (n/mm2) flexural strength6 - 9kg/cm2 we can matched customers standards
Minimum Order Size and Packaging details :
Minimum Order Quantity 20ft container
Supplier: AAC Block (Autoclaved aerated concrete)
1density+10% moisture450 – 950+10%kg/m3 2compressive strength3.0 – 5.0mpa (n/mm2) 3flexural strength6 - 8kg/cm2 4expansion coefficient9.2 ~ 10.4(10 – 6oc) 5thermal conductivity0.13watt/mok 6shrinkage
1density450 – 950kg/m3 2compressive strength3.0 – 5.0mpa (n/mm2) 3flexural strength6 - 8kg/cm2 4expansion coefficient9.2 ~ 10.4(10 – 6oc) 5thermal conductivity0.13watt/mok 6shrinkage
1.Density+10% moisture: 450 – 950+10% kg/m3 2.Compressive strength: 3.0 – 5.0 mpa (n/mm2) 3. Flexural strength: 6 - 8 kg/cm2 4.Expansion coefficient:9.2 ~ 10.4(10 – 6oc) 5.Thermal conductivity:0.13 watt/mok 6.Shrinkage:
Supplier: Aac blocks, lightweight block, autoclaved aerated concrete
Fusion AAC Blocks (Autoclaved Aerated Concrete) is a certified green building material. These blocks are light weight, load-bearing, high-insulating, durable building product produced in a wide range of sizes and strengths. The raw materials used to manufacture these blocks are cement, fly ash, gypsum, lime and water. Fusion AAC blocks manufacturing involves hardening through steam-curing in autoclaves creating calcium silicates, making them stronger. These blocks are manufactured in a variety of sizes. These precast concrete blocks are widely used for internal and external wall construction. Fusion blocks are easy to install, nail, drill and cut for pipes and conduits. Most of the volume of an Fusion AAC block is air making them light weight thermally insulative/fire resistant with good acoustic properties.
Aerated autoclaved concrete blocks of size 600 x 200 x 200 mm 600 x 200 x 150 mm 25 cum in 20 ft container
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)