1. Product Overview
VHF finger expansion joints made by Vinh Hung Investment and Production Co., Ltd (VinhHung IP), include 2 types: Cantilever VHF-C and over-gap VHF-O, according to:
AASHTO LRFD standards
ASTM D 3542 92 (2003) standards
VHFC and VHFO are synchronously manufactured with high accuracy finger plates and accessories like bolts, rubber sheets-water prevention steel plates that bring profitability to new construction as well as inspection and maintenance work in service.
VHFC and VHFO accommodate the medium movement to big movement and can be used for both straight and skew bridges.
2. PRODUCT CHARACTERISTICS
Totally accommodate the medium and large longitudinal movements, and also vertical and transverse movement if any...
Simple installation, maintenance and replacement, which allows to replace the individual finger plates in short period of time and for each lane.
High loading resistance capacity, especially the
impact load.
Also available for skew bridges.
Rubber seal system is designed to be totally water-tight and prevent dust and debris.
Can be designed to compatible with different thicknesses of bridge decks.
To ensure the long-lasting durability, VHF finger expansion joints are protected from corrosion with methods like: paint with 2-component epoxy coating, PU-based painting (Polyurethane).., zinc coating according to ASTM A123, and especially Al-Mg coating (Al 5% and Mg 95% ratio) which ensures the durability of 100 years. This method is proved by the brine spraying test in 6000 hours (dry-wet 8hour cycles) according to ASTM B117 standards.
1. PRODUCT OVERVIEW VHM expansion joint made by VinhHung Investment and Production Co., Ltd (VinhHung IP) are composed of multiple steel rails in combination with support beam and special structures. VHM - modular expansion joints accommodate to longitudinal movement from160mm upwards. The expansion joints are connected to the bridge deck through the anchoring reinforced system. Rubber seal serve as the drainage trough and prevent the system from dust and debris. 2.PRODUCT CHARACTERISTICS Design and manufacture according to AASHTO â?? LRFD, TCVN 11823 â?? 2017 standards. Allow the longitudinal displacement of up to 720mm, the vertical and horizontal displacement satisfy AASHTO standards. Be able to withstand with high loads with stable and durable structure. Provide the smooth-riding surface while absorbing the impact of heavy traffic. Each center beam is fixed with an independent supporting bar, which satisfies the requirement of the fatigue threshold C (AASHTO 2007). Be protected with high anti-corrosive coating layer and treated with anti-skid coating technology. Be totally watertight.
Supplier: Valve, flange, pipe fitting, rubber expansion joints.
1. Product Overview VHF finger expansion joints made by Vinh Hung Investment and Production Co., Ltd (VinhHung IP), include 2 types: Cantilever VHF-C and over-gap VHF-O, according to: AASHTO LRFD standards ASTM D 3542 92 (2003) standards VHFC and VHFO are synchronously manufactured with high accuracy finger plates and accessories like bolts, rubber sheets-water prevention steel plates that bring profitability to new construction as well as inspection and maintenance work in service. VHFC and VHFO accommodate the medium movement to big movement and can be used for both straight and skew bridges. 2. PRODUCT CHARACTERISTICS Totally accommodate the medium and large longitudinal movements, and also vertical and transverse movement if any... Simple installation, maintenance and replacement, which allows to replace the individual finger plates in short period of time and for each lane. High loading resistance capacity, especially the impact load. Also available for skew bridges. Rubber seal system is designed to be totally water-tight and prevent dust and debris. Can be designed to compatible with different thicknesses of bridge decks. To ensure the long-lasting durability, VHF finger expansion joints are protected from corrosion with methods like: paint with 2-component epoxy coating, PU-based painting (Polyurethane).., zinc coating according to ASTM A123, and especially Al-Mg coating (Al 5% and Mg 95% ratio) which ensures the durability of 100 years. This method is proved by the brine spraying test in 6000 hours (dry-wet 8hour cycles) according to ASTM B117 standards.
1. PRODUCT OVERVIEW VHF finger expansion joints made by Vinh Hung Investment and Production Co., Ltd (VinhHung IP), include 2 types: Cantilever VHF-C and over-gap VHF-O, according to: â?¢ AASHTO LRFD standards â?¢ ASTM D 3542 â?? 92 (2003) standards VHFâ??C and VHFâ??O are synchronously manufactured with high accuracy finger plates and accessories like bolts, rubber sheets-water prevention steel plates that bring profitability to new construction as well as inspection and maintenance work in service. VHFC and VHF O accommodate the medium movement to big movement and can be used for both straight and skew bridges. 2. PRODUCT CHARACTERISTICS Totally accommodate the medium and large longitudinal movements, and also vertical and transverse movement if any... Simple installation, maintenance and replacement, which allows to replace the individual finger plates in short period of time and for each lane. High loading resistance capacity, especially the impact load. Also available for skew bridges. Rubber seal system is designed to be totally water-tight and prevent dust and debris. Can be designed to compatible with different thicknesses of bridge decks. To ensure the long-lasting durability, VHF finger expansion joints are protected from corrosion with methods like: paint with 2-component epoxy coating, PU-based painting (Polyurethane).., zinc coating according to ASTM A123â?¦, and especially Al-Mg coating (Al 5% and Mg 95% ratio) which ensures the durability of 100 years. This method is proved by the brine spraying test in 6000 hours (dry-wet 8hour cycles) according to ASTM B117 standards.
Since the time of our inception, our range of SS Weld Neck RingFlange has been quite popular. These products exhibit high tenacity and durability with reliable outputs. Manufactured from stainless steel, these products are tested as per the international standards of quality. We can also customize these products as per the needs and demands of the clients. These flanges are specially used as extensions for expansion joints. The features of these products are as follows: Specifications: Standard: ansi b16.5 Size: 1/2-48 Features: Durable Reliable Long service life Low maintenance Corrosion-free
-Since the time of our inception, our range of SS Weld Neck RingFlange has been quite popular. These products exhibit high tenacity and durability with reliable outputs. Manufactured from stainless-steel, these products are tested as per the international standards of quality. We can also customize these products as per the needs and demands of the clients. These flanges are specially used as extensions for expansion joints. The features of these products are as follows: Specifications: â?¢ Standard: ansi b16.5 â?¢ Size: 1/2â?³-48â?² Features: Durable Reliable Long service life Low maintenance Corrosion free
1. Are you a trading company or factory? We are a manufacturing factory and we also have our own exporting license. 2. Do you have a certificate? Yes, ISO, FDA, LFGB, CE, and PED certificates. We also have some patents in design. 3. How do you control the quality? In quality control, the most important is to avoid material mixing. In our factory, 3 Spectro PMI machines are used in the raw material warehouse, production plant, and dispatch plant. Pressure inspecting machines, PMI machines, RA roughness spectator, hardness testing machines..... all machines help in the inspection. 2 staff inspect during production in different sections 5 staff inspect the finished productions to avoid a shortage, poor quality, mixing chemicals.... 4. If there is any quality problem, how do you solve it? We are very proud that we never make one customer leave us. We are not 100% perfect, there is some quality problem. Normally replacement, compensation, or resending goods to customers as per the condition. To be discussed as per the condition. 5. How long is your delivery time? For normal products in 7-10 days; for bulk orders, in 15-25 days. It depends. 6. Warranty time? 3 years warranty for all of our stainless steel products. Gaskets or the easy broken parts are not included due to the different applications for customers. 7. Why trust in us? 14 years in this industry. It makes us professional. Good credit in this market. All of our machines are the assurance of our responsibility. 8. Free sample? Free samples can be provided for first cooperation under sincere cooperation. 9. What is the MOQ? 1pcs MOQ is welcome for starting Cooperation 10. Material certificate? Material certificates, mill certificates, pressure testing certificates, roughness certificates, measure certificates, RT certificates,... can be available, please declare when you inquire us.
ASME/ANSI/DIN/GOST/BS EN RF/FF/RJ 150#-2500# Carbon Steel /Stainless Steel /Alloy Steel Forged WN/SO/Threaded/Plate/Socket/Blind Flange 1.Material: Carbon steel A105/Rst37.2/C22.8/Q235 Stainless steel 304/304L,316/316L,321,ect. 2.Size:1/2"-48" 3.Pressure:150lbs-2500lbs PN0.6-PN16.0 4.Facing:RF/RJ/ FF 5.Standard:ANSI(ASME)16.5 16.47/DIN/JIS/UNI/... 6.Flanges of welding neck, socket welding, threaded, blind, slip on, lap joint are in accordance with ANSI 16.5 from 1/2" to 24" and classes 150 to 2500 (complete range). 7. Production process : raw material--cutting--heating--forging--heat treatment--maching--inspection.-washing-ex-working. 8. Certificate :ISO9001-2008 9. Used for : linepipe, heat exchanger, petroleum,chemical,power,gas,water,shipbuilding,construction,etc. 10.Blind, slip on, welding neck flanges are from 6 Bar to 40 Bar in accordance with DIN. 11.Flanges from 1/2" to 48" and up to 450 lbs are in accordance with BS10 Table D & Table E, BS Table F & Table H, BS Table J & Table K. 12.Flanges from 2kg to 210 kg are in accordance with JIS. 13.Flanges according to API 605/ASME B16.5/ASME B16.47 14.Depending on special purposes, flanges can be manufactured in different shapes and sizes 15. Excellent and high quality contro
1. PRODUCT OVERVIEW VHR joints made by VinhHung Investment and Production Co., Ltd (Vinh Hung IP) is the steel strip-seal joint comprising of two steel rails with anchor bars connected to embedded bars in the pier cap of the headwall of the abutment, elastomeric strip serves as the trough for drainage and debris, nosing materials: non-shrinkage mortar or concrete with minimum compressive strength of 40MPa. There are 2 main types of VHR expansion joints identified by the cross-section of the steel rails: VHR-C steel rail expansion joint and VHR-F steel rail expansion joint. 2.PRODUCT CHARACTERISTICS Totally accommodate to longitudinal movement up to 100mm, and also vertical and transverse movement if appear. Simple in design and installation, high load bearing and durability. The joints are designed suitably for curb and median structures. Totally water-tight.� To ensure the long-lasting durability, VHF-steel strip expansion joints are protected from corrosion with methods like: coat with 2-component epoxy painting, PU-based paint (Polyurethane).., zinc-coating according to ASTM A123â?¦, and especially Al-Mg coating (Al 5% and Mg 95% ratio) which ensures the durability of 100 years. This method is proved by the brine spraying test in 6000 hours (dry-wet 8-hour cycles) according to ASTM B117 standards
