Plugs And Bushings

ASME/ANSI Standard: ASME B16.11,ASTM A733,MSS SP-83,MSS SP-97 EN Standard: EN 10241 JIS Standard: JIS B2302 GB Standard: GB/T 14383 GB/T 19326 Type: Elbow:45�°,90�° Tee:Straight,Reducing Cross:Straight,Reducing Coupling:Half-Coupling Plug Bushing Nipple Union Boss Cap Outlet Surface: Bare or Coated Protective Paint or Anticorrosive Coating or Galvanized Size: 1/8" NB to 12" NB Class: 2000#.3000#,6000# Material: Carbon Steel,Alloy Steel,Stainless Steel MOQ: 5 Nos Transportation: FCL&LCL by sea Delivery: 10-15 days after signed contract Payment: L/C or T/T or D/P or O/A

A swage nipple eccentric is a type of pipe fitting that is used to connect two pipes at an angle. The fitting has an eccentric bore, which means that the center of the bore is offset from the center of the fitting. This allows the fitting to be aligned with the two pipes at an angle. The technical specifications of a swage nipple eccentric vary depending on the size and material of the fitting. However, some common specifications include: 1. Material: Carbon steel, Alloy steel, Stainless steel or Ductile 2. Size: 1/4 inch to 8 inches 3. Schedule: STD, XS, 160, XXS 4. Thread type: NPT, BSP, BSPT 5. Pressure rating: 100 psi to 20,000 psi Swage nipples eccentric are commonly used in a variety of applications, including: A. Plumbing B. HVAC C. Fire sprinkler systems D. Pressure vessels E. Industrial piping They are a versatile and reliable type of pipe fitting that can be used in a wide range of conditions. Here are some additional features and benefits of swage nipple eccentric: a. They are easy to install and remove. b. They provide a secure and leak-free connection. c. They are resistant to corrosion and rust. d. They are available in a variety of sizes and materials to meet the needs of different applications.

A swage nipple concentric is a type of pipe fitting that is used to connect two pipes of the same diameter. It is made of a single piece of metal that is swaged, or expanded, to fit tightly around the pipes. The swage nipple is then inserted into the pipes and secured with a nut. The technical specifications of a swage nipple concentric vary depending on the size and material of the fitting. However, some common specifications include: 1. Material: Carbon steel, Alloy steel, Stainless steel or Ductile 2. Size: 1/4 inch to 8 inches 3. Schedule: STD, XS, 160, XXS 4. Thread type: NPT, BSP, BSPT 5. Pressure rating: 100 psi to 20,000 psi Swage nipples concentric are commonly used in a variety of applications, including: A. Plumbing B. HVAC C. Fire sprinkler systems D. Pressure vessels E. Industrial piping They are a versatile and reliable type of pipe fitting that can be used in a wide range of conditions. Here are some additional features and benefits of swage nipple concentrics: a. They are easy to install and remove. b. They provide a secure and leak-free connection. c. They are resistant to corrosion and rust. d. They are available in a variety of sizes and materials to meet the needs of different applications.

A bull plug is a solid plug used as an isolation device in piping systems, conduits or wellbore tubulars. It is a short part with one threaded end and one rounded closed end. The threaded end is used to connect the bull plug to the pipe or conduit, and the closed end provides a barrier to fluids or gases. The technical specifications of a bull plug will vary depending on the material, size, and thread type. However, some common specifications include: 1. Material: Carbon steel, Alloy steel, Stainless steel or Ductile 2. Size: 1/4 inch to 8 inches 3. Schedule: STD, XS, 160, XXS 4. Thread type: NPT, BSP, BSPT 5. Pressure rating: 100 psi to 20,000 psi Bull plugs are used in a variety of applications, including: A. Blocking off pipelines or conduits B. Isolating sections of piping for maintenance or repair C. Preventing the flow of fluids or gases D. Protecting equipment from contamination They are also used in oil and gas drilling operations to plug off the bottom end of down-hole logging instruments from borehole fluids. Here are some of the advantages of using bull plugs: a. They are simple and easy to install. b. They are available in a variety of sizes and materials to meet the needs of different applications. c. They are relatively inexpensive. d. They can be used to isolate a variety of fluids and gases. Overall, bull plugs are a versatile and effective way to isolate fluids and gases in piping systems, conduits, and wellbore tubulars. They are simple to install and available in a variety of sizes and materials to meet the needs of different applications.

A pipe long nipple is a short length of pipe with threaded ends that is used to connect two pipes or fittings. Pipe long nipples are available in a variety of sizes and thread types to fit different applications. Technical Specifications 1. Size: 1/8 Inch to 4 Inch Customized Up to 12â?? 2. Material: Carbon steel, Alloy Steel, Stainless steel, Duplex 3. Thread: NPT, BSP, BSPT Applications Pipe long nipples are used in a variety of applications, including: a. Connecting two pipes b. Extending a pipe run c. Tapping into a pipe d. Repairing a leaking pipe e. Adding a fitting to a pipe Safety Precautions When working with pipe long nipples, it is important to take the following safety precautions: A. Use the correct size and type of nipple for the application. B. Make sure the nipple is properly threaded and tightened. C. Do not overtighten the nipple, as this could damage the threads. D. Use gloves and eye protection when working with pipe long nipples.

A pipe short nipple is a short length of pipe with threaded ends It is used to connect two pipes or to extend a pipe Description A pipe short nipple is a cylindrical tube with threaded ends The length of the nipple is typically less than 12 inches The diameter of the nipple is typically the same as the diameter of the pipes that it is connecting Technical Specifications The following are some of the technical specifications of a pipe short nipple 1 Size 18 Inch to 4 Inch Customized Up to 12 2 Material Carbon steel Alloy Steel Stainless steel Duplex 3 Thread NPT BSP BSPT Applications Pipe short nipples are used in a variety of applications including A Connecting two pipes B Extending a pipe C Tapping into a pipe D Mounting valves and fittings E Repairing leaks Safety Precautions When working with pipe short nipples it is important to take the following safety precautions a Use the correct size and type of nipple for the application b Do not overtighten the nipples c Use thread sealant to prevent leaks d Be aware of the pressure and temperature ratings of the nipples

A pipe closed nipple is a short, threaded pipe fitting that has closed ends. It is typically used to connect two pipes or to tee off a pipe. Pipe closed nipples are available in a variety of materials, including steel, stainless steel, brass, and plastic. They are also available in a variety of sizes, with the most common sizes being 1/4 inch, 3/8 inch, and 1/2 inch. Here is a technical specification of a pipe closed nipple: 1. Size: 1/8 Inch to 4 Inch Customized Up to 12â?? 2. Material: Carbon steel, Alloy Steel, Stainless steel, Duplex 3. Thread: NPT, BSP, BSPT When choosing a pipe closed nipple, it is important to consider the material, size, thread type, and length. It is also important to make sure that the nipple is compatible with the other components in the system. Here are some additional things to keep in mind when using pipe closed nipples: A. Pipe closed nipples should be tightened to the correct torque specification to prevent leaks. B. Pipe closed nipples should not be used in applications where they will be exposed to high temperatures or corrosive chemicals. C. Pipe closed nipples should be inspected regularly for leaks and damage.

A forged union is a type of pipe fitting that is used to connect two pipes. It is made of a single piece of metal that is forged, or shaped, into a specific design. Forged unions are typically made of steel, stainless steel, or brass. Technical Specifications The technical specifications of a forged union vary depending on the material it is made of, the size of the pipe it is designed to connect, and the pressure rating it is designed to withstand. However, some common technical specifications for forged unions include: 1. Size: 1/8 Inch to 3 Inch 2. Class: 3,000#, 6,000# Lbs. 3. Material: Carbon steel, Alloy Steel, Stainless steel, Duplex 4. Thread: NPT, BSP, BSPT Applications Forged unions are used in a variety of applications, including: 1. Plumbing 2. HVAC 3. Process piping 4. Oil and gas 5. Chemical processing 6. Marine Advantages of Forged Unions Forged unions offer a number of advantages over other types of pipe fittings, including: A. Strength: Forged unions are very strong and can withstand high pressures. B. Durability: Forged unions are very durable and can withstand a lot of wear and tear. C. Flexibility: Forged unions can be used in a variety of applications. D. Easy to install: Forged unions are easy to install and do not require any special tools. Overall, forged unions are a versatile and reliable type of pipe fitting that is well-suited for a variety of applications. They are strong, durable, and easy to install, making them a good choice for many projects.