The basic metal, Iron is alloyed with Carbon to make steel & has the effect to increasing the hardness and strength of iron, pure Iron cannot be hardened or strengthened by a heat treatment but the addition of carbon enables a wide range of Hardness and Strength.
Grade: 1. Carbon Black PL330J 2. Carbon Black PL330C 3. Carbon Black PL330C 4. Carbon Black PL550C 5. Carbon Black PL550B 6. Carbon Black PL550C 7. PL660B Beads 8. Carbon Black P330 9. Carbon Black P550 10. PL772B Beads Purity: 1.OAN (ml/100 gm) >90 2.OAN (ml/100 gm) >90 3.OAN (ml/100 gm) >95 4.OAN (ml/100 gm) >100 5.OAN (ml/100 gm) >100 6.OAN (ml/100 gm) >100 7.DBP No (OAN) (cc/100 gm) >100 8.DBP No (OAN) (cc/100 gm) >100 9.DBP No (OAN) (cc/100 gm) >105 10.DBP No (OAN) (cc/100 gm) >90 Actual price will be provided after your enquire.
We are exporter of Activated Carbon. Activated carbon made from raw organic material such as coconut shell. The raw material of activated carbon pulverized and sieved into appropriate and uniform particle sizes. Carbon has been used as an adsorbent for centuries. Activated carbon is a particularly good adsorbent due to its high surface area to volume ratio.
We are supplier and exporter of Activated Carbon. Granular Activated Carbon Products range from the size 0.2mm to 3.75mm. Granular Activated Carbon has relatively larger particles size compared to powdered activated carbon and consequently, presents a smaller external surface. Powdered Activated Carbon Powdered Activated Carbons are small activated carbon particles, with a size that is predominantly less than 0.075 mm. Activated Carbon is used worldwide in purification of Water, Air, etc. We are producers Dura specie of Palm Kernel Shells Powder & Pellets Activated Carbon, with over 1600 Iodine level and equally high level of Harness.
Selected Anthracite Coal Granular Activated carbon for amine purify ,remove EDA, MEDA, DIPA, etc Granular Coal based activated carbon is made from coal though high temperature activation .It is black in appearance, non-toxic and tasteless, with large pores. It is featured by strong adsorption capacity, high wear-resistant performance etc. It is evtensively applied to solvent recovery, catalyst carriers, gas adsorption and water purification in the field of chemicals, environmental protection, power plant, electronics, petrochemical industry, farming, medicine, marine transportation. Packing 25kg PVC bags+1MT big bag or as customers'requested Trade terms FOB CNF CIF Payments terms 1).T/T 30%advance , 2).the balance against copy of B/L Delivery time After we receive deposit within 7-10days Sample Sample is free within 1kgs
PT Ekspor Indonesia Aja is a production of Activated Carbon in Indonesia. Activated carbon is a low-cost material with distinguishable properties like high specific surface area, high porosity, and desired surface functionalization. Because of that, activated carbon is diversely used for effective applications in adsorption, removal of pollutants, water treatment, and energy. Size : 20 x 50 Mesh Bulk Density : 0.4872 g/ml Iodine : 1180.71 mg/g Moisture : 22.19 % Partcle Size : 99.14 % Ash : 4.54% pH : 10.01 Weight : 250 gram
Welcome to Gremlog Trading DMCC, a catalyst for sustainable solutions and innovation. We are thrilled to introduce our premier offering carbon dust, a by-product of aluminium smelting . As the primary supplier for carbon dust production, Gremlog Trading DMCC is at the forefront of this groundbreaking initiative. This high-carbon-content by-product, generated during the production of anodes for aluminium smelting, stands as a remarkable alternative fuel for the cement and steel industry.
The process of activation is carried out in two stages. Firstly the coconut shell is converted into shell charcoal by carbonization process which is usually carried out in mud-pits, brick kilns and metallic portable kilns. The coconut shell charcoal is activated by reaction with steam at a temperature of 900oC -1100oC under controlled atmosphere in a rotary kiln. The reaction between steam and charcoal takes place at the internal surface area, creating more sites for adsorption. The temperature factor, in the process of activation is very important. Below 900oC the reaction becomes too slow and is very uneconomical. Above 1100C the reaction becomes diffusion controlled and therefore takes place on the outer surface of the charcoal resulting in loss of charcoal. Products Specifications PH Value : 6.5 - 7.5 Methylene Value adsorption mgm/gm : 190 - 350 Adsorption capacity at % by mass (min) : 45 Moisture (max.) : 5% Ash (max) : 5% Hardness : 90