FITTINGS ARE SINGLE/DOUBLE FERRULE MADE FROM BAR STOCK
CONFIRMING TO IS 320 HT-2
Range : 1/8"OD TO 1"OD, 4mm OD TO 25mm OD
This is used for clamping of Tubes/Pipes for purpose of damping vibrations, providing support to the installation and preventing loosening of joints and welds.
Available in size 6mm OD to 2OD for Tubes, 1/2" NB to 12" NB for pipes.
MOC : PP/ALUMINIUM/POLYAMIDE
Fittings are double ferrule for leak proof, torque free seal at all tubing connections.
Fittings confirm to ANSI 31.1,ANSI 31.2,ANSI SEC VIII and BS 4368 etc as per various special industrial requirements.
Each identifications are provided, such as step shoulder on hex nuts.
Range :1/8"OD to 1"OD, 4mm OD to 25mm OD
End connections :BSP/NPT/BSPT
MOC :SS 304, SS 316, MONEL, HASTALLOY, TEFLON, CS
It allows heat to dissipate, and to protect instruments from high temperature.
Available in 1/2" . Pipe schedules are available in S-40, 80, 160, XXS
With IBR certifications also. (Optional)
MOC : SS 304, SS 316, ALLOY STEEL, CARBON STEEL.
Available in Perforated & Ladder type in the width of 50mm to 600mm having height from 20 to 150mm and the thickness from 1mm to 4mm with all accessories.
MOC : ALUMINIUM, HOT DIPPED GALVANISED/FRP
SIZE: 1/2" (15 NB) to 48" (1200NB) DN10~DN5000
Class 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
MOC : A 105,SS304,SS 316,HASTALLOY,INCONEL
Orifice flanges are intended for use instead of standard pipe flanges when an orifice plate or flow nozzle must be installed Wide range of materials, including ASTM A 105N Carbon Steel ASTM A350 LF2, ASTM A182 F316L Stainless Steel
Ratings from Class 300 lbs to 2500 lbs
Sizes from 1" Nominal Bore
Designed for Pneumatic and Hydraulic line applications.
These fittings can be quickly connected or Dis-connected without spillage. While the system is in operation. Port size
varies from 1/8" to 2" and are available with BSP/NPT.
Proof pressure upto 400 BAR.
Available in Single Check / Double Check in CS/SS Material with Male/Female/Hose Connections
Valves are made from bar stock/forged material and are machined precisely. These valves used to Isolate, Calibrate and Drain the process lines.
Range : :1/8" to 1" threaded.1/8"OD to
1"OD, 4mm OD to 25mm OD
End connections :NPT/BSPT/BSP
MOC :SS 304, SS 316, BRASS, MONEL, HASTALLOY, TEFLON, CS
Valves are supplied in 2/3 piece designs and connections as per customer requirements.
Available with Teflon, Delrin, Peak seats.
Range : 1/8" to 1" threaded. 1/8"OD to 1"OD,
4mm OD to 25mm OD
End connections: BSP/NPT/BSPT
MOC : SS 304, SS 316, MONEL, HASTALLOY, TEFLON, C
Two valve manifolds are used to connect with pressure gauge, pressure switch, pressure transmitter.
Types : Block & Bleed type, Angle type, Integral type.
MOC : SS 304, SS 316, MONEL, HASTALLOY, CS
Three valve manifolds have two valves for isolation and one for equalizing.
Types : Block & Bleed type, Integral type.
MOC : SS 304, SS 316, MONEL,
HASTALLOY, CS ideal for remote and direct mounting on DPT, DPG, DPS.
Five valve manifolds have two valves for isolation, two for isolation and one for equalizing.
Type : Separately type, Integral type.
Used to protect the damage of pressure gauges and instruments
Available in the name of Snubbers, Gauge savers, Gauge cocks.
Available in Forged Steel & Cast Steel
Types : Gate, Globe, Check
Rating : Class 800/1500/2500 in SW/SCRD Ends,
Class 150/300 in Flanged Ends.
MOC : A 105/A 182 F-304,316/ F-11,F-22
A 216 Gr WCB/ A 351
GR CF8/CF8M
Used for modern industry for sealing fluid, chemicals, gas.
Types : CUT GASKET/SPIRAL
WOUND/OCTOGONAL/OVAL/JACKETED
MOC : CAF, NON ASBESTOS/SS 304/SS 316/
TEFLON/EPDM
Used for high pressure and low pressure for tightening the
flanges.
MOC : ASTM A 193 B5,6,7,16,B8/A 194 GR 3,6,2H,8
Used for pneumatic applications for low pressure & also used for calibration of instruments.
Available in Push-on and Push-in type.
MOC : Anodised Aluminium, Brass, SS.
Tubes also available in PU/NYLON/TEFLON
For high pressure applications on hydraulic and pneumatic lines, fittings are supplied upto rating of 9000 psi as per ANSI B 16.11. Also Butt Weld fittings are as per ANSI B 16.9 with various schedules
MOC : SS 304, SS 316, CARBON STEEL, Alloy Steel (F-5,F-11,F-22,F-91)
For high pressure applications on instrumentation and process lines, fittings are supplied made from Barstock/Forgings with
Hex Body for better grip.
MOC : SS 304, SS 316, CARBON STEEL,
Alloy Steel (F-5,F-11,F-22)
For Piping, Flanges are available in various pressure ratings.
Types : WNRF/SORF/SWRF/Lapjoint
Rating : Class 150/300/600/900/1500/2500
MOC : A 182 F 304/316, A 105, Alloy Steel (F-5,F-11,F-22), A 350 LF2
Standard materials are 316/316L Stainless Steel, 304/304L Stainless Steel, and A105 Carbon Steel.
For corrosive environments, special materials such as Alloy C-276 and Alloy 600 are also available Thermowells shall be machined out of bar stock up to length 1200mm and with SS 316 material as a minimum
Available from reputed make in the form of WELDED / SEAMLESS / ERW
MOC : IS 1239 GR/A/B/C, A106GRB/A 335 P-11/P-22/P-91
A 312 TP 304/316
SIZE : 1/2" TO 12"NB
TUBES : A 179/A 269 TP 304/316.
SIZE : 1/8"OD to 1"OD
ANGLE/CHANNEL/FLATS/ROUND/HEX BARS/ COILS &PLATES Stockist for IS 2062 GRADE / Stainless Steel WITH BELOW SIZES 25 x 25 x 3mm to 130 x 130 x 12mm, 75 x 40 TO 400 x 100 4MM TO 6MM THICKNESS SAIL, VIZAG, JINDAL, REPUTED MILL
High quality, precision moulding FRP to protect the precious instruments from weather and heat. Made as per the customers requirements.
Used to collect dirt and moisture which might impair the performance of instruments.
Available in 3" & 4". Pipe schedules are available in S-40, 80, 160, XXS
With IBR certifications also.(Optional)
MOC : SS 304,SS 316, ALLOY STEEL, CARBON STEEL.
Made as per customers requirement, provided with Needle/Ball Valves.
MOC : SS 304,SS 316,
CARBON STEEL (Galvanized)
