AC powered gas alarm 1.Semiconductor sensor 2.Power Supply: AC110/220 3.Comply EN50194 4.Fault signal, low battery warning, Stand-alone GAS Alarm from PEASAWY.COM 1.Sensor Type: semiconductor sensor 2.Power Supply: 12-24VDC 3.Standby Current: 10uA 4.Alarm Current: 23mA 5.Operation Temperature: 0¡ã- 50¡ã 6.Low battery warning 7.Self-Test Button to verify operation 8.Silence function with dual led indicator 9.Sensitivity meets EN50194 10.Alarm Sound Level: >85dB at 10 feet (3m) 11.Easy to install, move and maintain.
Smoke alarm 1.9V Battery smoke alarm 2.High sound 85dB(3m) smoke alarm 3.Test button 4.Low battery alarm PW-507 Stand-alone photoelectric smoke alarm is under BSI approval, and can be calibrated into either UL, VDS, NF Standards. It features UL-approved Photoelectric sensing components with precise smoke detection. and long life (18 months) 9V battery operation (9V UltralifeLithium battery model for 10-year life is available too). 9V Power Supply, Meets CE, RoHS and EN14604 Specifications/Special Features: Features: Works on principle that infrared scatters on smoke surface Probes smoke which is generated by incomplete combustion at initial stage of fire Smoke detector consists of photoelectric system, signal processing identification and alarm circuit Infrared scatters on surface of smoke when smoke enters darkroom of detector Photoelectric diode receives scattered light and generates photoelectric signal current Photoelectric signal generates alarm signal after being processed by identification circuit, accordingly purpose of alarming is achieved Specifications: Power supply: 9V DC Block battery/PP3 Quiescent current: 8¦ÌA Alarm current:16mA Alarm decibel: ¡Ý85dB/3m Sensitivity standard: EN14604 Age limit of battery: 2 to 5years(It varies with different types of battery) Temperature: -10 to +40 degrees Celsius Low battery Alarm High and stable sensitivity 5 years limited quality guarantee.
CO Alarm 1.Electrochemical CO alarm,Fault signal warning 2.CE ROHS certified CO alarm 3.Test/Hush Button 4.LowBattery alarm. PW-916 Stand-alone CO Alarm from PEASWAY This CO alarm could be one of the most advanced designs in detection Carbon Monoxide .Battery powered models last long life (exceeds 3-year period and up to 5-years), It's the perfect choice for detecting dangerous CO poisoning. Various power input can be manufactured according to customer's special request. 1.CO ALARM Sensor Type: Electrochemical 2. Non-radioactive technology for environmental friendly 3.Power Supply: 4.5V Battery(3*AA) 4.Standby Current: 10uA 5.Alarm Current: 23mA 6.Operation Temperature: 0¡ã- 50¡ã 7.Low battery warning 8.Self-Test Button to verify operation 9.With quick fix mounting bracket for easy installation 10.Silence function with dual led indicator 11.CO Sensitivity meets EN50291 or UL2034 12.Alarm Sound Level: >85dB at 10 feet (3m) 13.Easy to install, move and maintain this co alarm 14.Five years limited warranty for the CO-sensing Operation Temperature 0 oC to 50 oC Response Times At 50 ppm, unit must alarm within 60 ~ 90 mins At 100 ppm, unit must alarm within 10 ~ 40 mins At 300 ppm, unit must alarm within 3 mins Power Source 4.5V BATTERY Standby Current 10uA Alarm Current 23mA Alarm Sound Level 85 decibels at 3 m Detection Type Electrochemical Ambient Humidity 15% to 90% Relative Humidity.
Strobe Light and Horn 1.High alarm sound 100db; 2.Flashing: 2s; 3.Xenon light strobe light; 4.Strobe light and horn; This Strobe Light and Horn is used on fire alarm system. Strobe light and horn features: 1.High alarm sound 100db 2.Flashing: 2s 3.Xenon light strobe light 4.Strobe light and horn. Strobe light and horn Specifications: Operating Voltage: 24VDC Operating Temperature: -10¡ã C to 50¡ã C Operating Humidity: 0 to 95% RH, no condensation or icing Average Current: 70mA Flash Rate: ¡Ü 2 Second Sound Output: ¡Ý130dB Light Output: 1.2W Light Life: >30000 flashes Dimensions (L x W x H): 180 x 130 x 68mm.
Fire alarm bell 1.Base:aluminium 2.Fire alarm bell size:5/6" optional 3.Operating voltage:dc24v 4.High alarm sound Fire alarm bell with good performance from peasway Specifications: 1. Fire alarm bell:aluminium 2. Fire alarm bell size:5/6" optional 3. Operating voltage: 24v dc±15% (no pole) 4. Operating current: 23ma (24v dc) 5. Dimensions: ø127 x 56mm 6. Sound level: >100db (24v dc).
Supplier: Led bulb, tube light, panel light, decoration light, wall light, steel wires, steel plate, stainless steel plate, twisted wire rods, galvanized wires, wire mesh, site fencing, mosquito mesh, thread rods, rebar, twisted rods, t bar, nuts and bolts, hardware, pvc pipes, upvc pipes, api pipes, melamine, mdf board, plywood, film faced, shuttering, packing, core veneer, face veneer, hdf molded door skin, door filler, tubular particle boards, pvc boards, wpc boards, doors, block board, hard board, gypsum board, canopy, carpet, flooring wooden, bamboo, laminated engineering, tiles, granite tiles, granite blocks, black galaxy, wash basin, water closets, washbasins, ss sinks, faucets, furniture, pvc edge bending, crew, locks, pvc seals, silicone cartridges, shower enclosures, shower door hinges, handles, knobs, brackets, slides, nails, solar panels, flexible solar panels, solar power station, battery, inverters, rechargeable fans, lights, spring, 3ply disposable face mask, oxygen concentrator ,
Services: Buying office, oem, components sourcing, value added services
Buyer: In shell pecan nut, macadamia nut
Supplier: Fire alarm system, smoke detector, fire detector, CO detector, gas detector, heat detector, water detector
For the Mosquito killer Led Bulb Light, is a 900 lumen bulb that doubles as an insect killer. The light features a blue UV LED which attracts insects into a Mosquito Killer grid.And the Mosquito Killer grid uses only 1W of electricity, while the light itself uses a meager 9W – and both can be used independently.They are used at home and outdoor. A brush is provided to clean off insects once the bulb switched-off.Compare to other traditional mosquito killer, this bulb has no chemicals, no sprays and hence no fumes to our life. 2nd generation 2-in-1 LED LIGHT Bulb Plus LED Mosquito Killer Bulb Wattage: 10W Blue UV light Lumen: 900-1000lm Color Temperature (CCT): 6500K Input Voltage: AC 90-130V & 220v-240V With CE and ROHS Operation: Step1: Switch it on,both lighting +killing are on. Step2: Switch on again,light off,only killing on. Step3: Switch on again,killing off,only light on. Step4: Switch off, both off.
LED light.
