India Mark Ii Deepwell Hand Pump Can Operate Upto 45 Mtrs Depth. It Is Provided With Ss /cast Iron Cylinder, Ss Or Ms Rods, And Upvc, Gi Or Ss Pipes.
Afridev Deepwell Hand Pump As Per Skat Switzerland Specifications Can Fetch Water From 51 Mtrs Depths.
India Mark Ii Extra Deepwell Hand Pump Can Operate Upto 90 Meters Depth. It Can Be Provided With Cast Iron / Ss Cylinder, Ss Or Ms Rods, Gi Or Ss Pipes.
Interlocking garden tile made from 100% Indonesian Teak Wood with plastic base. This product not requiring any assembly. You can apply it yourself. Suitable for both indoor and outdoor usage. Product dimension is 25 cm X 25 cm with 3 available thickness (12 mm, 15 mm, and 18 mm). Product details: - Kiln Dried (KD) - 2 variants of finish (Unfinished or Natural Finish) - No Crack - No Pinhole - Plastic Base - Easy to Apply
The chain link conversion head is made of galvanized steel and is equipped with double-sealed flange bearings. Flange bearing are used for the handle support. The spout of the water tank shall be made of 2 inch nominal diameter pipe. The pipe holder in the water tank shall be welded to a smaller flange. Adequate sealing is provided. The pump body shall have a base plate with four foundation bolt holes exactly 9 inches square (i.E. 228.6mm) and a diameter of 20mm (bore size) to conform to the cwsa ghanaian standards.The pump stand will be fixed on a ground fixing assembly with a suitable rubber gasket the foundation bolts shall be of ° 16mm, length 160mm with at least 30m thread at the upper end. The foundation bolts are welded on a frame of steel rods. The four ° 16mm, length 160mm foundation bolts have to fit the above mentioned foot flange. The ground fixing assembly has to be brought in position in the fresh concrete, so that a minimum of 30mm of thread remains out of the concrete.Riser pipe with tip-stretched (not welded-on) spigot (male end) and socket (female end), for connection purposes furnished with male/female rope thread at pipe and to avoid wear and tear between the rods and pipes during operation a centralizer is to be provided.The 10.8 mm dia stainless steel pump rods for the connection to the above mentioned gmimkii reciprocating hand pumps shall have rolled on threads.The full brass pump cylinder shall be assembled for the employment together with the above û mentioned components that are the above ground system the lightweight riser pipes and stainless steel pump rods.Pump cylinder size 1 +ö x 20ö. The cylinder shall be of all brass construction with nitrite bucket 1 +ö bsp thread at top cap and m12mm metric rod connection, rod and lock nut of stainless steel aisi 316 quality, piston rod length 750mm. The bottom cap and top cap must be fit tight (without the use of an o-ring) that during operation, the caps will not be loosened.
Size: 30/400; 40/400; 43/400 Closure Option: Plastic Closure, Metal Steel Material: Plastic PP
High quality plastic lotion pump Size: 24/410; 24/415; 28/400; 28/410; 28/415; 33/400; 38/400; 38/410 Closure Option: Plastic Closure, Metal Steel Material: Plastic PP
Discharge Minimum 375 ml per stroke or 15 Ltr. / 40 stroke completed in 1 minute. Static water level depth 20 - 40 meter Stroke Length 125 mm + 4mm Cylinder - Cast Iron or Stainless Steel or UPVC Bore well Casing Size 100 NB to 150 NB Connecting Rod - Mild Steel or Stainless Steel in 3 meter length Rising Main Size 32 NB MS GI Riser Pipe or 38 mm x2mm SS Pipe or 40 NB UPVC Pipe with Coupler or 40 NB UPVC with SS Socket and Nipple in 3 meter length Above Ground Structure (Pump Stand, Head, Handle, Water Tank etc.- (Mild Steel with hot dip galvanized)
Agriculture Redial Flow Vertical Openwell
