Supplier: Rice, corn, sugar, wheat, cement, aluminum ingots, copper scrap , used rail and hms 1&2, urea, sulphur, cooking oils, petroleum products, aviation fuel, mazut, millet, alfalfa grass, timber logs, teak wood, wood pallet
Buyer: Steel scrap, used rails, cement
JHG Ultra clear float glass is produced by less amount of iron in the molten glass formula. This type is more transparent than regular glass and it doesn't have that greenish tint. The less iron content can increase the light transparency.ultra clear glass is the best choice for architects and designers when need color-matching. Thickness is from 2-25mm Jumbo size 3660x18000mm
C5 Petroleum Resin with Grade SENO-PC5100 is a high class refined C5 Aliphatic Hydrocarbon Resins designed specially as a Binder to meet the technical requirements for hot melt road marking paint in Asian and American Markets.Our C5 petroleum resins offer good dispersion of fillers and pigments and also show excellent flow properties in Hot Melt Road Marking Paint Systems. Our C5 Hydrocarbon Resins are mainly recommended to the Thermoplastic Road Marking Paint and Hot Melt Road Marking Paint industry. Product Parameters Items SENO-PC5100 Appearance (eyeballing) yellowish granule Softening Point (R&B)�ºC 95-105 Color No. (50% Toluene)Ga. 5.0 Max Acid Value(mgKOH/g) 1.5 Max Ash Content(wt%) 0.10 Max Melt Viscosity(200�ºC)Cps 250 Max Application : SENO-PC5100 mainly use for Hot Melt Road Marking Paint,Thermoplastic Road Marking Paint and Pressure Sensitive Adhesives Packaging & Shipping :25kg/bag Store closed containers in a cool, dry, well-ventilated area. Avoid exposure to direct sunlight.
Supplier: Fruits like apples, oranges, papaya, pear, lemon, kiwi, loquat, melon, vegetables like potatoes, garlic, tomato, ginger, carrots, cucumber, pepper, onion, garments, face mask, coffee beans, windows and doors (a different kind), glasses (different of glasses), sun houses
We are supplier and exporter of Ferro Silicon. Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags. Ferro Silicon Ferro Silicon has a melting point of 1200�?�°C to 1250�?�°C with a boiling point of 2355�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
Supplier: Hardwood and softwood logs usa and canada
souther yellow pine logs, eastern white pine logs
walnut logs, red oak logs, cherry logs, african teak logs & various other specie
lumber sd and kd, syp lumber , ewp lumber
lumber : ashwood ,redoak, white oak ,walnut sawn timber hardwood : red merantiwood malaysia
european hardwood, beechwood,ashwood,red oak ,white oak , whitewood : ad ast, kd ,kd s4s white wood and wood pallets
austrian whitewood, bosnian whitewood, romanian whitewood, usa pine wood brazil whitewood
plywood :china ,malaysia,indonesia ,vietnam commercial plywood, veneer plywood ,melamine plywood, hpl plywood
mdf: china ,thailand ,malaysia
plain mdf ,melamine mdf , veneer mdf , high glossy mdf , film faced plywood (marine plywood): china,india,vietnam
shuttering plywood
solid chipboard, particular board and osb board
doors and frames
Buyer: Hardwood and softwood logs usa and canada
souther yellow pine logs, eastern white pine logs
walnut logs, red oak logs, cherry logs, african teak logs & various other specie
lumber sd and kd, syp lumber , ewp lumber
lumber : ashwood ,redoak, white oak ,walnut sawn timber hardwood : red merantiwood malaysia
european hardwood, beechwood,ashwood,red oak ,white oak , whitewood : ad ast, kd ,kd s4s white wood and wood pallets
austrian whitewood, bosnian whitewood, romanian whitewood, usa pine wood brazil whitewood
plywood :china ,malaysia,indonesia ,vietnam commercial plywood, veneer plywood ,melamine plywood, hpl plywood
mdf: china ,thailand ,malaysia
plain mdf ,melamine mdf , veneer mdf , high glossy mdf , film faced plywood (marine plywood): china,india,vietnam
shuttering plywood
solid chipboard, particular board and osb board
doors and frames
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.