The Tire derived Steel or Tire Wire Scrap is a light melting scrap obtained during the shredding and granulation process of used tires.
Generally 10% - 20% of the weight of an old passenger car tyre usually consists of steel. An average shredding plant produces about 100-200 MT of steel tyre wire and its quality can vary according to technology, storing and management systems adopted by the producing plants.
We can provide tire wire scrap that still contains up to 20% rubber/fiber. This percentage is detected by manual separation test.
The material can be loaded loose in 40 HC container.
For further details, please feel free to contact us.
Standard: JIS ASTM DIN EN ISO
Diameter
0.1-5mm/custom
Length
custom
Surface
mill,polished,bright,mirror,hair line,brush,checkered,antique,sand blast,etc
Application
Building, industry etc
Payment Terms
30% T/T in advance as deposit,70% balance against the B/L copy or 100% irrevocable L/C at sight
Delivery time
5-15 days after receiving L/C or deposit
Remark
Specific requirement of alloy grade,temper or specification can be discussed at your request
Copper No. 2 kinds of alloy Wire cooper without lines, containing impurity, contain Copper quantity for 96% (minimum content 94%).
Shall not contain excessive lead and tin change of copper wire, welding of copper, brass and bronze line, excessive oil, prohibition and nonmetal,crisp, burning line, utterly margin of fine copper and excessive yarn. Need appropriate means to remove dirt. Birch Shall consist of clean, untinned, uncoated, unalloyed
copper wire and cable, not smaller than No. 16 B & S
wire gauge, free of burnt wire which is brittle
pecifications:
Copper wire scrap, (Millberry) 99.99% at a purity of 99.98% min and 99.99% max
Copper: 99.9%
Carbon: 0.03%
Coblet: <0.001
Iron: 0.005%
Phosphorus: <0.01%
Sulfur: <0.01%
Zinc: 0.003%
Copper wire scrap:
Wire diameter: 0.20mm, 0.25mm, 0.30mm
Weight: 3kg, 5kg, 7kg, 15kg, 20kg
Purity:99.9% min
Packaging Details:50kg per bale , 1000kg per bundle ,or Customer Specific Requirements.
Tensile strength: 1000 N/mm2, 900 N/mm2, 500 N/mm2, 450 N/mm2, N/mm2
The Incinerated scrap or E46, is the by-product derived from the reprocessing of incinerated domestic waste.
After the combustion process, the furnace output (IBA Incinerator bottom ash) is firstly washed, magnetically separated and screened to separate any no ferrous material.
At a visual inspection, the material is fragmentized, with iron and steel parts, resulting partly cut or in shredded form.
The stock appears heterogeneous and contains all kind of cut or dismantled steel parts such as sheets, bars, frames, wires, bolts and other iron/steel household residues.
The incinerated scrap is eventually oxidized, due to the thermal and cooling treatments, that the material has been submitted to. The burnt scrap also contains minor slag parts, ash and iron oxide, due to the recovery process.
Such components are inherent and adhere to the scrap surface. The total impurities, can be sorted, but not fully removed.
The consignment does not contain any type of arms, ammunition, mines, shells, cartridges, radioactive contaminated, or any other explosive material in any form either used or otherwise.
The collected stock, is stored in open air, on cemented flooring. It can be loaded loose in 20â?? heavy duty container.
Please feel free to contact us for further details.
1. Berry copper wire scrap conforming to ISRI standards/specs.
2. Minimum order quantity: 200 Metric tons. The seller can offer 1000MT - 2000MT per month / per shipment on a long term basis ( for quantities greater than the above mentioned, please write to us in detail )
3. Origin of scrap wire ( either S.A / Europe / Russia ) seller's option.
4. SOP: Letter of Intent with Bank Confirmation letter from the Buyer (trading companies). If the buyer-importer is end-user/consumer, BCL is not required but due to manufacturing licence/end products' details and other information as required before the execution of a contract.
5. Price $5500pmt CFR one safe port
6. Delivery/shipment - shall be provided after the receipt of LoI with BCL and due diligence.
7. Payment terms by Irrevocable, confirmed Letter of credit from first-class/internationally recognized bank
We have been engrossed in manufacturing and supplying top notch range of Copper Wire Scrap. The offered scrap is processed and segregated by our deft professionals with the aid of pioneering techniques. This scrap is used for manufacturing of copper wires that is used in binding of electric motors. Additionally, the provided Copper Wire Scrap can be bought from us in various specification according to need of clients at pocket friendly rates and prices.
Following are the details below:
Product Name:
Copper Wire Scrap
Appearance:
99.89% Pure
Quality:
Grade 1
Material:
Copper
Package:
15kg /25kg Woven Bags & Custom Packing
Color:
Red Gold Color
Usage:
Constructional, Industrial, Remelting
Origin:
United States
1 Tons
By Road, By Air & By Sea
Why Choose Us:
Customer Care & Satisfaction.
Fast Delivery.
No Compromise about Quality.
24/7 Available.
