Specifications:
High Tensile Steel Wire as per the following specs
Bright Plain High Tensile Steel Wire of 7mm Diameter QTY 250 Metric Tons
1) Steel required must be bright plain - high tensile steel wire 7mm diameter and will be used in manufacturing prestressed concrete poles for medium voltage networks.
2) The steel should conform in all respects with the requirements of the latest edition of BS. 5896 or Chinese specifications [prestressed wire 7.00-1570-WLR-P-GB/T 5223/2002] or equivalent.
3) The nominal tensile strength of the steel should be (1570 N/mm2).
4) The steel should be of “Low relaxation “quality, and the wire is pre-straightened and will run out straight form the coil when used at site.
5) No joint is allowed in the wire which should be one piece in the coil.
6) Steel should be supplied in large diameter coils of (1.8 -2.4) m.
7) The weight of Each coil should be approximately 1000 kgs.
8) Good attention should be paid to the packing of each coil to ensure good protection to the steel during loading, shipping, unloading, transportation, and storing at the site of the purchaser. For that, every coil should be tightly wrapped by proper and secure seaworthy packing.
9) Each coil should have a separate label made of steel sheet with a reasonable size. This label should contain the following information: will be given upon production
10) The price should be valid for at least Two Month and must be based on steel NET weight.
Buyer is interested to receive quotations for the following RFQ -
Product Name: Low Relaxation Steel PC Strand Wire
Specifications :
Post Tensioning 12.7mm
Type: PC wire TC 5mm
Like: Drawn Wire
Application: Construction
Alloy Or Not: Is Alloy
Special Use: Cold Heading Steel
Steel Grade: Steel
Specifications:
MS Plate ( 6100X1500X6 mm )-6 mm MS Plate ( 6100X1500X8 mm )-8 mm MS Plate ( 6100X1500X12mm )-12mm MS Plate ( 6100X1500X10 mm )-10 mm MS Angle ( 1.5"X1.5"X5 mm ) MS Angle ( 2"X2"X5 mm ) MS C Channel ( 4"X2"X6 mm ) MS Hot Roll ( 6000X200X150X5X6 mm ) MS Rod ( 500 DWR )-100 MS Plate-24 mm MS Rod ( 500 DWR )-10 mm MS Angle-50X50X5X6000 mm MS Plate-20 mm MS Plate-30 mm MS Plate-25 mm MS Rod ( 500 DWR )-12 mm MS Plate-35 mm MS Checker Plate-4 mm MS HoleSheet ( Alternate-4'X8'X4 mm ) ( 4'X8'X3mm, Hole Dia-6 mm MS HoleSheet ( Alternate-4'X8'X3 mm ) ( 4'X8'X4mm, Hole Dia-10 mm MS Hole Sheet ( 4'X8'X3 mm ) Hole Dia:8 mm MS Hole Sheet ( 4'X8'X3 mm ) Hole Dia:12 mm MS Shaft -16 mm MS Shaft -50 mm
Quantity : 1 container
Buyer is interested to receive quotations for the following RFQ -
Product : Steel Plates
Specifications:
Grade A with BV certificates 18*2000*9000 mm qty 120 MT 20*2000*9000 mm
Qty : 490 MT 22*2000*9000 mm qty 50 MT 25*2000*9000 mm qty 15 MT 30*2000*9000 mm qty 85 MT 30*2500*9000 mm qty 92 MT 40*2000*9000 mm qty 23 MT 50*2000*9000 mm qty 29 MT 35*2000*9000 mm qty 45 MT 50*2000*6000 mm qty 101 MT 100*2000*4000 mm qty 71 MT Total qty ~1121 Ton
