Accumax offers water metering solutions based on proven technology of Electromagnetic and represent the next generation of smart metering.Accumax delivers solutions in all shapes and sizes. From individual meters and remote reading systems to fully automated service solutions.The meter is true volume measuring meter. The measurement is independent of viscosity, Density, Dissolved/Undissolved solids, pressure or temperature of the flowing liquid as long as it maintains certain minimum conductivity. Various types of Liner & Electrode are used as per application requirements. Empty pipe detection is also provided.Accumax has in-house R&D centre & calibration setup as per industries standards.Principal of Operation:The Accumax Electromagnetic Flow-meter work on FARADAYs LAW OF ELECTROMAGNETIC INDUCTION. Hence the meter detects flow based on velocity of conductive liquid. Thus the meter are Calibrated in terms of volumetric flow rate from it.Advantages:
Size DN3-DN3000
Electrode:SS316,HC,HB,Ti,Tan,Pt
Liner Material: PTFE,PFA,FEP,NEOPRENE,HARD RUBBER
Accurance: 0.5% of reading velue,0.3% and 0.2% optional
Connection: Flange,Tri-clamp,Wafer,Union
Introduction
Electromagnetic flow meter is hallmarked by its high performance and reliability based on successful, field-proven technology.
It is being widely used in industries such as petroleum, chemical engineering, iron and steel, food, electricpower, paper making,
water treatment, petrochemical, medicine etc
Features
Medium temperature can be -20~200.
Integrated vertification, diagnostic function and empty pipe detection.
Measure forward and reverse direction flows.
Built-in reference electrodes, no need to connect ground ring.
Dual frequency excitation and stable zero point.
Precision coil winding technology, makes magnetic field more uniform.
High protection grade,IP65.
No moving parts, no pressure loss.
High accuracy: ±0.5% of reading,±0.3% and ±0.2% optional, velocity >0.3 m/s.
Application
Chemical
Medicine
Beverage
Iron and steel
Water supply
Electricpower
Water treatment
Our Electromagnetic Flow Meter accurately measures the flow rate of conducting liquids or slurries flowing in closed pipes. Due to simple and right design the Electromagnetic Flow Meter is an obstruction-less & maintenance-free instrument in place of conventional mechanical flow measuring device. The use of "Pulsed DC" technology offers highest ability & better measuring accuracy in form of 4-20 mA DC linearly proportional to volumetric flow
Features :
Size DIN 10 to DIN 3000 NB pipe line.
High Accuracy better than + 0.5% of reading.
Zero pressure drop.
Suitable for high viscosity conductive liquids.
Digital flow rate / Totalizer Indication / Batching system
Isolated Transmitting Output 4-20 mA.
No Grounding Rings require.
Minimum Upstream & Downstream straight length.
Compact & Rugged, IP 65 protection.
Remote flow indication totalizer / Batching system
Data Logging & Wireless Data Transfer System through GSM Modem
Applications :
Effluent Treatment Plants.
Sewage Treatment Plants.
Water supply schemes.
Steel & aluminum.
Pulp & Paper.
Chemical & Fertilizers.
Food & Drug.
Pumps & valve calibration lab.
Dairy Industry.
Corrosive liquids.
Sugar industry.
Sugar Industry.
Textile and printing textiles
Hotels & Resorts
Water parks
Buildings & Infrastructure
Municipal corporation
Dds238 single phase electrical watt-hour meter adopt a large scale of integrated circuits and smt technology, whole screen and anti-jamming structure, its technical performance are completely conform to national standard gb/t 17215-2002 and international standard iec62053.The meter has the following features:
(1)high reliability, low power loss, high accuracy, wide load capacity.
(2)can accurately measure active energy power from positive direction and negative direction, and accumulative total in the same direction, and has function of anti-stealing electricity.
(3) adopt photo-electricity coupling no power pulse output, and indication using electricity by led, and can realize collecting reading meter so as to control using electricity and management. It is used for measuring active energy power loss in frequency 50 hz or 60 hz single phase ac electricity net and which is installed in meter box indoors or outdoors.
Sea river measuring waste water treatment diving open channel electromagnetic flowmeter
Electromagnetic Flow Meter Chemical Industry, Orifice Plate Flowmeter, High Quality flowmeter
Quick Detailsï¼?
Place of Origin Henan, China (Mainland) Brand Name WEILI Model Number MGG
Accuracy ±0.5% ~ ±1.5% Application Widely Name waste water treatment diving open channel electromagnetic flowmeter
Product Name Orifice plate flowmeter Power supply DC24 V/220VAC 50HZ measurement accuracy ±1cm(Pillar diameter 1cm)
Output 4-20mA /RS485 Medium Sewage Material SS304
Product Descriptionï¼?
Magne W3000 PLUS Diving type electromagnetic flowmeter is mainly used for flow rate measurement in open or closed channels .This flowmeter has been widely used in departments of water supply and sewage in towns ,industrial waste water sewage ,sewage management ,farmland irrigation ,etc.
Characteristicsï¼?
1.The body is made of plastics ,resulting in light and corrision resistant structure .
2.The structure is simple and without moving parts .The flowmeter have sturdy resistance against staining,dogging or eroding if a fluid contains suspensions or adherents .
3.The sensor can also be easily installed on any gate of an exsisting water channel .The channel may be an open or closed type with retangular or circular cross section .
4.The flow signal is linear ,having a high measuring accuracy from 100% down to zero flow rate .Stable measurement can be done even when the channel is affected by the tide .
Technical Parametersï¼?
Nominal Bore: DN50,100,200,400,600,800mm
Measuring range 0 ~ 1m/s to 0 ~ 10m/s(Flow velocity)
Max diving depth 10m
Accuracy ±1.0%;±2.0%
Measuring Electrodes 316L Stainless steel , Harrington alloy B/C, Titanium , or special material
Medium Temperature 0 ~ +40
Output signals of sensor 0 ~ 0.2mVp ~ p to 0 ~ 2mVp ~ P
Output signals of the flowmeter 4 ~ 20mA.Dc and 0 ~ 5000Hz or 0 ~ 2000Hz
Electrical conductivity �5μs/cm
Accumax offers water metering solutions based on proven technology of Electromagnetic and represent the next generation of smart metering.Accumax delivers solutions in all shapes and sizes. From individual meters and remote reading systems to fully automated service solutions.The meter is true volume measuring meter. The measurement is independent of viscosity, Density, Dissolved/Undissolved solids, pressure or temperature of the flowing liquid as long as it maintains certain minimum conductivity. Various types of Liner & Electrode are used as per application requirements. Empty pipe detection is also provided.Accumax has in-house R&D centre & calibration setup as per industries standards.Principal of Operation:The Accumax Electromagnetic Flow-meter work on FARADAYs LAW OF ELECTROMAGNETIC INDUCTION. Hence the meter detects flow based on velocity of conductive liquid. Thus the meter are Calibrated in terms of volumetric flow rate from it.Advantages:
