MV power cable are rated up to 18/30 (36) kV and manly used in MV distribution network. The conductors are copper or aluminium , mostly compacted stranded to shape round insulated core. Their size range from 25 up to 630 sq mm per core and 3 insulated corer are laid up to assembly a cable. Any cable prtections may be applied , including construction and material for direct burial , longitudinal and /or water tightness, anti termite and fire safety.
6-35kv medium vollage power cable selection with cross-linked polyethylene insulation and plastic Sheath material, insulation layer USES the three co-extrusion technology, full automatic Change control. Such products, aging resistance, corrosion resistance, environmental stress not only electricity Gas properties and good mechanical properties, and has a simple structure and outer diameter Small, light weight, easy to use and elaborate divide not restricted, Public places such as crowed, place closed space.
XLPE power cable has high electric strength, mechanical strength, high-ageing resisting, environmetal stress resisting antichemical corrossion, and it is simple construction, using convenient and higher operating of long term temperature. It can be laid with no drop restriction.
Various of flame-retardant and non-flame retardant XLPE cable can be manufactured with three technology(peroxide, silane and irradiation crosslinking). The flame-retardant cable covers all kinds of low-smoke low-halogen low-smoke halogen free, and non-smoke nonhalogented and three classes of A, B, C.
Our XLPE power cable can be manufactured according to IEC 60502, IEC 60332, and IEC 60754. Some of indexes are superior to above international standard IEC.
Some of special XLPE power cable can be manufactured according to the other standards required by customs.
XLPE power cable having higher long-term working temperature and greater current rating, at the same environment XLPE cable may be reduced size(nominal cross-section)1or 2 class in comparison with paper and PVC cable. This is not only improve the quality and properties of products, but also reduce cables production costs.
With high efficiency and high power factor, Fuji Electric's Medium-voltage Variable Speed Drives contribute significantly to cost reduction and energy conservation. Fuji's Medium-voltage Variable Speed Drives products are applicable in a wide range of fields from plants to general industry and feature superior ease of maintenance.
As a specialist MV cable supplier, our standard medium voltage cable portfolio contains cable with single and 3-core copper or aluminium conductors, with a steel wire armour or aluminium wire armour for mechanical protection, and with various application-specific materials including Polyvinyl Chloride (PVC), Polyethylene (PE), Cross-linked Polyethylene (XLPE) and Ethylene Propylene Rubber (EPR) and oversheathing properties including Low Smoke Zero Halogen (LSZH). We also supply medium voltage standard cables manufactured against specific power network requirements supplied in triplex formation. Our MV cable products are installed across a number of industries ranging from construction to power transmission. They are widely used for power distribution between high voltage mains power supply and low voltage applications, as well as by utility companies to connect residential and industrial complexes, or renewable energy sources such as wind and solar farms, to the primary grid.
Our MV cables are available in specific lengths as well as in extended long lengths to facilitate installation and to reduce the number of joints.
