Purin Polyurethane

Adopting unique production technology, Focus- 6300 buytl tapes are mainly made of butyl rubber supplemented by other auxiliaries and fillers, with the superior high polymer materials. With its strong adhesion property and air-tight property, our waterproof sealing butyl tapes are environmental and solvent-free. Main Specification (Customized demand sare acceptable.) 6mm*8m 8mm*6m 10mm*4.57m Main Color - black Technical Data Product Series FOCUS-6300 Series Application Automotive Industry Elongation 500% Heat Resistance 90, no flowing within 2h Low Temperature Flexibility 40, no crack on surface within 24h Peel Strength 23N/cm Tensile Strength 230KPa Anti UV non-hardening and no cracks within in 2000h Corrosivity Non-corrosive to galvanized sheet, aluminum sheet and coppersheet. Advantages Strong adhesion, high tensile strength, excellent elasticity and extensibility. It can fully accommodate to the surface that it attached to Excellent performance in non-corrosive, weather resistance and adaptation. Applications Provide waterproof protection to car doors waterproof membrane. Provide waterproof and sealing protection to the battery of new energy automobile. Other waterproof applications on cars and new energy cars

Bitumen Primer * Bitumen Primer is Bituminous air curing ready mixed Acid & Alkali resistant special primer. Application * Concrete surface must be clean, dry and rough. No primer should be applied over smooth and wet surface. * After cleaning the concrete surface, one coat of Bitumen Primer should be applied with brush and allow to dry thoroughly. * The drying time will depend upon the temperature. * 24 Month at the temperature 30C (+2OC) Packing * Bitumen Primer: 25 Liter Drum Note * Bitumen Primer contains volatile and slightly toxic solvent. Keep away from spark and open flames at working area. * Bitumen premier it is manufactured using bitumen solution which is used for sealing of prime porous and non-porous surface, and also to protect residential and commercial building. * Bitumen Primer is used to protect substrate against corrosive attack, is suggested to apply anti-corrosive primer.It is best for protection against sub-striate against atmospheric corrosion and chemical corrosion. It is a mixed substance made up of organic liquids that are highly sticky, water proof, viscous,acid proof as with all surface coating, good Bitumen Premier is used for long life of the system. it is applied by brush or roller and allowed to dry before any water proofing treatment so to avoid solvent it is used in defects such as cracks, broken mortar joints, etc. are to be repaired prior to Bitumen primer application. Product Details: Grade Standard Technical Grade Physical State - Liquid Usage - Industrial Color - Black Characteristics: Appearance/Color - Pasty liquid/ black Chemical Base - Bituminous rubber emulsion. Density - 1.0 kg/l Curing Speed/ Rate - 3 - 4 hours Tack free after - 5 - 10 hours Cured after - 2 - 4 days (Dependent on ambient Solid Content by - temperature, substrate temperature, Weight - relative Water Content by weight - humidity and thickness of the coating) Bitumen Content - 41% by weight - Thixotropic (The viscosity can be adjusted by - Viscosity adding up to max. 5% of clean water. - Stir well prior use) - For light protection: 1.0 mm min. Coating - For greater protection: ~ 1.5 - 2.0 mm Thickness applied - in two coats. Water Penetration - 48 h, 1 bar: 78.5 cm2: 0 ml under Hydrostatic - 96 h, 4 bar: 78.5 cm2: 33 ml Pressure - Water vapor 6 x 10-7 mg / hmPa Permeability Service - -30 C to 200 C Temperature - Adhesion Concrete - Very good, Timber: Very good, Metal: Moderate Glass: Poor

Product Details: Tape Width 60-80 mm Use Carton Sealing Adhesive: Acrylic Foam Tapes are made with single or double sided adhesive coating to meet the customerâ??s requirements Usage: Single sided foam tapes are uses as gaskets, seals or heat or cold insulation in HVAC, automobile, refrigerator, air-conditioner, electronics appliance and electrical panel industries. Special rubber and PU foams are used as ant vibration and sound dampeners in electrical and electronic industries

Use Bag Sealing Adhesive Side Double Sided Material Polyimide Polyimide Tapes is made from specially treated base coated Polyimide film having adhesive of silicon or Acrylic coating on another side. Features: It has the sound withstand voltage, High-temperature resistance and solvent resistance features. Uses: The product (Polyimide-Kapton tapes) has mainly been utilized in the gold finger protection during the components mounting on printed circuit board (PCB) through wave soldering, transformer insulation binding, lithium cell( battery) polar ear fixing, and other occasions where need heat-resistance.

Usage/Application Mounting Type Double Sided Usage Packaging Adhesive Rubber Material Cloth Use Masking We made this Double Sided Tapes Paper, Plastic Film and Foam carrier which is coated with Acrylic/Rubber/Silicon adhesive coating depends upon the surface to be bonded, application period and temperature resistance required. Application: Foam and Felt lamination, Splicing of paper/film and metal coils. Mounting of metal/paper/plastic/glass/mirror in automobile industries, appliance manufacturing, aerospace industries, construction (metal facade, curtain wall, Glazing & cladding). Metal coils manufacturing, paper industries, Printing Industries, leather-cloth industries and signage industries.

Tape Length 30-40 m Feature Water Proof Material Tissue Double Sided Tissue Tapes is made from non woven-tissue paper coated on both sides with acrylic adhesive or hot melt rubber adhesive and laminated with release paper Features: Excellent tack and good strength for immediate bonding Good resistance to solvent Heat and chemical Usage: Foam and felt lamination in automobile and appliances manufacturing, Splicing of films/paper/ oils, lamination and fastening in paper/plastic and printing industries, adhere posters & envelopes, in shoe and leather industry, for computerized embroidery, for mounting nameplates, metal/polycarbonate stickers etc.

Tape Width >100 mm Tape Length >50 m Color Silver Use Bag Sealing Adhesive Acrylic Material Aluminium Foil Aluminum Foil Tapes are coated with acrylic or rubber adhesive and available with or without release paper. This foil tapes are available with 25 mic-100 mic thickness. Features: Shiny silver, U.V. resistance Flame, moisture and many chemical barrier Good for harsh Long term outdoor application It has hot & cold insulation property Usage: Widely used in tubes and lead jointing for air conditioner, refrigerator and water heaters. For wrapping on pipes, engines and wires as a heat & water resistance. Used as a static ground application.

Material PE Brand SuperStick Color Transparent Length Customized Feature Water Proof Packaging Type Roll Core Size 3 Inch Design Plain Is It Customised Customisation Adhesive Acrylic Feature Antistatic Filament Tapes are made with Fibre Glass Reinforce backing made up of Polyester Film with Glass Yarn, Coated with Solvent Based or Hot melt Rubber Adhesive. Application: Heavy duty packing. Bundling and strapping of metal coils. Pipes and tubes temporary Holding parts. Appliances in house hold and electric appliance manufactures. There are two kind of backing available: Straight line fiberglass (mono) Mesh fiberglass (cross)

Usage/Application Masking Material Crepe Paper Color White Tape Width Customized Tape Length Customized Size Customized, 3 inch Usage Packaging Adhesive Side Single Sided Paper Masking Tapes comes with different grades like Paint grade, Furniture grade, automobile paint grade and High-temperature resistance grad Application: Widely used for color separation and painting made by hand or by spray, Furniture making, automobile and aircraft painting, in appliance manufacturing, decorative glass making, powder coating, plating and sandblasting