The product is employs asphalt or thermoplastic elastomer (styrene â?? butadiene block copolymer SBS), modified asphalt impregnated base. Both sides are coated with elastomer or plastic bitumen,upper surface is sprinkled with fine sand , mineral grains (membrane) or coverage polyethylene film,and underside with fine sand or coverage from polyethylene membrane. The product has good waterproof performance and anti-aging performance, and has the characteristics of not flowing at high temperature, not brittle crack at low temperature, simple construction, no pollution, long service life.It is mainly used in the industrial and civil building roofingã??bathroomã??basementã??pond , bridge, parking lot, swimming pool, tunnel, reservoir and other buildings waterproof, moisture-proof, waterproof steam.Impermeability and maintenance of asphalt roofing.sbs Modified asphalt waterproof rolling material is especially suitable for waterproofing of buildings in cold areas and areas with frequent structural deformation.
Environmental protection products, water-based tasteless, convenient construction, wide range of application, the construction of complex parts has obvious advantages. After curing the formation of non-joint, complete elastic waterproof layer, improve the waterproof and impermeability of construction engineering, is rolls material. Itâ??s impossible to reach the product. The film has high strength and elongation, and has strong adaptability to cracking or expansion of the base. The maintenance is convenient, only to the damaged part partial maintenance, still can achieve the original waterproof effect. This product has bright color, can play the role of decoration and beautification, the moisture content of the base is not strict, wet base surface can be constructed.
Warranty:More than 5 Years Brand Name:LS Material:Butyl rubber tape Surface:HDPE Membrane,Aluminum Foil Thickness:1.3mm-1.5mm Length of Roll:5m/10m Width:5cm-10cm Working Condition:-40-130 Application:HOTEL, Villa, APARTMENT, OFFICE BUILDING, HOSPITAL 1.Excellent mechanical properties: high adhesive strength and tensile strength; good elasticity and elongation. 2.Stable chemical properties: good chemical resistance, weather resistance and erosion resistance. 3.Excellent application performances: (1)Good waterproof sealing effect; (2)Good adhesive performance; (3)Good heat-resistance and low temperature flexibility; (4)Good dimension stability; 4.Never solidification. Longtime keep flexible and able to bear some moving. 5.Easy and convenient to install, solvent-free and environment friendly.
IS Opaque Feel slightly hard, easy to scratch the surface Not easy to Pierce Good sealing Strong toughness
Hight transparent and a smooth surface The hand feels soft and the surface feels smooth Not easy to Pierce Good sealing Strong toughness
Raw Material: PP or BOPP Raw Material: Virgin material or recycled Color: All kinds of colors or as the customers' requirement Printing: One side or both sides in multi-colors with film or non film Width: From 260-1300mm Length: As the customer’s requirement Weave: 10x10,11x11,12x12,14x14,12×11or be customized Denier: 450D to 1500D Weights/m²: 50g to 200g Surface Dealing: Anti-slip or plain Top: Heat cut or hemmed Bottom: Single folded, double folded, single stitch, double stitch Liner: coated or with liner bag for moisture proof Usage: rice, flour, sugar, salt, animal feed, asbestos, fertilizer, sand, cement and so on. Packing: 500pcs(bale),1000pcs(bale) or can be customized Minimum Order20 feet container Delivery Time: 10-30days after place an order or negotiation Trade Term: CIF,CNF,FOB QINGDAO Special Requirements: As the customers' requirements Treat: UV treated or as the customers' requirement Loading qty.:12tons/20’container, 23tons/40’hq. we can make all kinds of size
Raw Material : PP or BOPP Raw Material : Virgin material or recycled Color : All kinds of colors or as the customers requirement Printing : One side or both sides in multi-colors with film or non film Width : From 260-1300mm Length : As the customer’s requirement Weave : 10x10,11x11,12x12,14x14 or be customized Denier : 450D to 1500D Weights/m : 50g to 200g Surface Dealing : Anti-slip or plain Top : Heat cut or hemmed Bottom : Single folded, double folded, single stitch, double stitch Liner : coated or with liner bag for moisture proof Usage : rice, flour, sugar, salt, animal feed, asbestos, fertilizer, sand, cement and so on. Packing : 500pcs(bale),1000pcs(bale) or can be customized Minimum Order 20 feet container Delivery Time : 10-30days after place an order or negotiation Trade Term : CIF, CNF, FOB QINGDAO Special Requirements : As the customers requirements Treat : UV treated or as the customers requirement Loading qty. : 12 Tons/20’container, 23tons/40’hq. We can make all kinds of size
Specifications 1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistance Description It is an enhanced mildew proof product adopting nano-scale Ag+ antimicrobial and mildew proof technology, integrating odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc. Specification Data Solvent: Water Pigment: Non-lead pigment Theoretical Solids By Volume: more than 50% Theoretical Coverage: Theoretically 1 litre of this product covers 12 sqm in 1 coat Coverage varies considerably depending on application methods and surface roughness and porosity. Shelf Life: Minimum 12 months at 77F(25C) unopened and store in cool and dry places. Recommended Film Thickness: Wet: 80 micron Dry: 30 micron Dry Time: At 77F (25C) and 50% R.H. to recoat Touch Dry: 1 hours Recoat : 2-3 hours Application: Brush, Roll, conventional spray or Airless Spray. Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water. Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%) Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%) Airless spray: do not thin Clean-up: Clean up equipment with water Typical painting system Substrate System All kinds of Wall surfaces 1.Alkali Resistance Primer (1 coat) 2.Emulsion Wall Paint (2 coats)
Jute (including kenaf) was an important foreign exchange earner for the producing countries during '60s. Even during the '70s, jute was an important commodity for most of the producing countries. However, during the '80s, bulk handling techniques and synthetic substitutes entered the market and jute started losing its predominant position in the market.
