It is connected to the tractor with 3 hanger systems and works with the movement it receives from the tail shaft.
The blades cut shear between the harpses with two-way movement. (Harps are still in this model)
The automatic protection mechanism on it is switched on when it is stuck in an obstacle, preventing damage to the machine.
The wings behind the cutting section open the tractor wheel space, preventing the harvested product from being crushed and damaged by the wheel. It can be used even in small garden type tractors that do not tire the tractor.
There are two types of hydraulic and mechanical types.
It can be used efficiently in harvesting green feed crops and legumes.
Recommended use is 1-2 normal gears 10 -14 gas. (operator, field status may vary depending on tractor type.)
We make rubber bale cutter models from 660mm to 2000mm
Usage: For cutting natural rubber, synthetic rubber, etc. and other big plastic materials. To cut big block into small pieces. Especially suitable to be installed near the rubber mixer. To cut the big rubber bale, then feed into the mixing machine.
Model: XQ-660, XQ-800, XQ-1000, XQ-1250, XQ-1500 and XQ-2000.
(Each model with different cutting force and different price)
Crosscutting machine is corrugated cardboard production line in the cutting of cardboard products mechanicalequipment, and its technical performance and equipment adjustment conditions directly affect the finishedcardboard cutting size is accurate, the pressure line is broken and the appearance of the cut is smooth and beautiful.
1.1-Heavy model single facer 2-gear box drive 3-Max speed 200m/min
2.It can store 200 units orders,replace the cutter specifications quickly and accurately,changing orders without stop,And enables networked computers to facilitate production management.
3.Germany Bryant servo motor drive controller, Taiwan Eview yield 10.4 inches color touch screen display,the project at a glance.
Ratchet Cable Cutter.
1, J13J25 J30 Ratchet Cable Cutter Can be cut "Prestressed Steel Wire"ACSR"?It is forbidden to cut Cu-AI Cable
2,J40?J52?J75?J95?J100?J130,J160 Can be cut Armord Cable, It is strictly forbidden to cut "strand", "wire rope"
3, Because of J100?J130?J160 Is to cut the thick cable and have Armord, so the tip is not very sharp. It will be a little time to cut a small cable. If you do not need to cut a large cable, please buy the following model J95, J95 the following models are sharp blade.
