3 LAYERS (Material & Protections) : The face mask is made up of 2 Layers of spunbund polyproplene (SBPP) & 1 layer of Melt-blown PP which has soft layers that prevents skin irritation or allergy problems. The Ear loop material is made from the Latex free round elastic at 7.5 inches which elongates with a ratio 1:2 making it easy to wear and remove with comfort. The malleable nose wire keeps the mask secure in its position. FEATURES Bacteria Filtration Efficiency > 98% Melt-blown PP provides superior filtration. Hypoallergenic soft surface layers prevents skin irritation and allergy Ultrasonic bonding technique used to make a clean production. Low breathing Resistance Soft Latex free elastic ear loops Layers : Outer Color Facial Layer Spunbund PP 20 to 30 gsm Middle Filter Layer Melt-blown PP 20 to 30 gsm Inner White Facial Layer Spunbund PP 20 to 30 gsm
3 LAYERS (Material & Protections) : The face mask is made up of 2 Layers of spunbund polyproplene (SBPP) & 1 layer of Melt-blown PP which has soft layers that prevents skin irritation or allergy problems. The Ear loop material is made from the Latex free round elastic at 7.5 inches which elongates with a ratio 1:2 making it easy to wear and remove with comfort. The malleable nose wire keeps the mask secure in its position. FEATURES Bacteria Filtration Efficiency > 98% Melt-blown PP provides superior filtration. Hypoallergenic soft surface layers prevents skin irritation and allergy Ultrasonic bonding technique used to make a clean production. Low breathing Resistance Soft Latex free elastic ear loops Layers : Outer Color Facial Layer Spunbund PP 20 to 30 gsm Middle Filter Layer Melt-blown PP 20 to 30 gsm Inner White Facial Layer Spunbund PP 20 to 30 gsm
CellBios Overwrap Sealer is a medical device used to heat seal the Fluorinated Ethylene Propylene (FEP), Ethyl Vinyl Acetate (EVA) overwrap bags and other thermoplastic materials. The device ensures uniform sealing and also can join two similar or disimilar materials together. FEATURES Wide Variety of Films Electronic timer to adjust dwell times, matching material type and thickness. Easy, Ergonomic User-Friendly Design Only a light pressure is all it takes for a powerful and optimum sealing. Consistent Sealing Quality Adjustable sealing pressure and electronic timer control to provide uniform sealing. Cost Effective Maintenance-friendly functions to please facility maintenance personnel. Safety Sensor to avoid the possible finger pinch or burn during the sealing process Impulse Sealer Ready for use as soon as the power is turned on.
CellBios Tube cum Bag Sealer is compact and lightweight with a hand unit. It generates strong high radio frequency power to melt thermoplastic tubing and seals in 2-4 seconds. Both battery operated and direct power supply sealers are available. Power Supply: AC-powered with handheld sealing unit suitable at blood collection sites or laboratories where multiple users can share a machine. Battery operated sealer: Light-weight hi-power battery pack is (rechargeable and replaceable) with high efficiency connector and seals 1100 â?? 1500 times. Seals wide range of blood bag tubing good for tubing diameter 2-6 mm (1/4 ) Fast sealing in seconds. No warm-up required Makes seals with a notch at the center for easy segmenting of tubing Head protector is detachable for sealing head cleaning Canvas carrying bag is included. The bag carries all parts.
CellStor Single-Use 2D & 3D Biocontainers CellStor Single-use 2D & 3D biocontainers for more advanced applications, such as tangential flow filtration, diafiltration and in-process mixing CellBios offers a wide range of custom 2D & 3D Bags (bioprocess bags) for a variety of applications: preparation, storage and transport of bio-pharmaceutical solutions. The biocontainers are available in single layer and multi layer depending on the applications and range of volumes. The Biopharmaceutical Industry has validated two primary polymers for the contact layer of Single-Use bioprocess bags which to CellBios utilize. The first material is EVA (Ethylene vinyl acetate) which is commonly used for 2D Bags, and Bags for Rocking Platforms. The second and most widely used material is ULDPE (Ultra low density polyethylene) which is used as the contact layer for large 2D bags and 3D Bags.
CellBios offers Freeze-Thaw Bags which protects high-value bio-pharmaceutical in-process and end products. Made of high grade, gamma-stable ethylene vinyl acetate, this new single layer technology has no binders, agents or adhesives. Freeze-Thaw bags are stable in frozen applications (upto -196 C). Freeze-Thaw bags supplied with necessary validation documents to support your Quality & Regulatory requirements. APPLICATIONS Freeze-Thaw Studies Product Storage & Shipment Formulation & Fill Finish In-process Sampling and Archiving Cell Banking Other Downstream Studies BENEFITS Wide temperature Range (from +40 C to -196 C) Multiple Freeze-Thaw cycles No delamination Low Level Leechable & Extractables Film retains flexibility while in a frozen state ADVANTAGES CellStor Freeze-Thaw Bags are designed for ultra low temperature storage and transport solution for biopharmaceutical industry. CellStor Freeze-Thaw bags provided with multiple port and connector configuration. Bags can be provided with canisters to hold the bags. Freeze-Thaw bags can be used between +40 C to as low as -196 C applications.
Tank Liners - 2D & 3D Single-Use Tank Liners for Bioprocessing Tank Liners for Bioprocess CellBios offers CellLiner range of Tank Liners for media and buffer mixing applications. CellBios offers smallest tank liners available in the market. CellLiner is offered as small as 5L until 560L with various ranges. Thus, CellLiners can be used in multi department ranging from R&D, PD, and Production sites. The film used in CellLiner is 3-layer and LDPE as fluid contact layer. Same contact layer film chemistry for all media buffer prep and storage applications. APPLICATIONS Media Preparation Buffer Preparation Reagent Hydration Process Solution Preparation Transient Storage FEATURES Starting with 5L upto 560L range. Manufactured according to ISO GMP standards. Three Layer film, product contact layer is LDPE. CellBios also provides outer containers to hold tank liners according to customer needs. Ready to use gamma sterilized Non-animal origin Provided with complete regulatory certification ADVANTAGES Smallest available size is 5 L for small scale mixing applications like powder feed preparation. Eliminates multi-film qualification in same project. Fits for various outer container configurations Suits for customized applications Minimizes bio-burden due to construction under sterile cGMP conditions Eliminates post-use cleaning steps required with reusable containers. Helping to reduce cross- contamination risks and reduce cycle times.
Tube Extrusions for Cell Therapy, Biopharma & Medical Devices CellBios specialize in high-performance medical tubing for cell therapy, bio-pharma and medical applications and has a long, successful track record of supplying high-precision, specialized extruded tubing to the medical device industry. Our capabilities include extrusion of small diameter tubing used for catheters, drainage tubes, drug delivery, and much more. These extrusions are available in single and multi-layer material configurations. Our in-house tool room provides quick turnaround of tight-tolerance dies for prototype and production extrusion runs. Medical Tubing Multilayer Medical Tubing PTFE Liner Tubing Lubricious Tubing PEEK Tubing Polyimide Tubing Reinforced Tubing
Medical Films for Healthcare & Lifesciences Industries CellBios manufactures a wide variety of medical films for the life-science and healthcare industries. These films are used in numerous applications that include collection, storage, transfer and drainage solutions. Advantages Lighter in weight Contains higher gas barrier properties Better flex crack resistance Non-corrosive Autoclaveable and extremely clear Clean burning for responsible disposal Dioxin-free for clean incineration Type of Films and Characteristics High or low gloss films Monolayer and Coextruded cast embossed films Polyethylene, Polypropylene, Nylon and their copolymers RF, ultrasonic and heat sealable films Antistatic Laminated to non-woven and/or paper Low skid Quiet, drapable products Anti-Microbial solutions Common film thicknesses from 1.0 mil to 40 mil Common film embossed thickness up to 70 mil Film width from 1.5 inches to 88 inches Standard roll diameter up to 22 inches and up to 41 inches for select products Corona treatment (38 to 46 dyne level) CellStor films are used for Cell Therapy applications with the following products: Cord Blood Processing & Storage Bags Transfer Bags Collection / Drainage Bags Fluid Bags Sampling / Transport Bags Buffer / Media Preparation Bags Medical Antistatic Polyethylene Film CellBios engineered and manufactures this film for a client in the medical industry. The matte embossed film has antistatic and non-glare properties that are necessary for its application as a medical drape. The film is produced from polyethylene resins and an antistatic additive; the double-sided (MH) matte emboss creates the non-glare feature. Single & Multi-layer Film Technology With our unique technology, we can produce the most functional, cost-effective single and multi-layer films for any of your medical applications. Also, we will work with you to provide a solution and to meet your needs. Using our extensive experience in the most advanced flat-die, cast-on-carrier, blown-film extrusion and multi-layer construction technologies we produce high-quality materials to perform reliably in a wide variety of critical applications.