Amm Automation Technology(Shanghai)Co.,Ltd

Magnetic Stirrer
Digital LCD Display
Last Measurement in Memory
Heating amp Stirring can proceed Simultaneously
Bushless Motor for Low Noise
Anti scratch and Corrosion Resistance
Ceramic Plate Surface
ABS Cabinet

Brand Labtical
Model NameNumber MS5LH
Type Magnetic Stirrer
Speed range  1002000rpm
Maximum mixing capacity 5000 ml 
Temp Range amp Accuracy 300C Accuracy 1C
Temperature Sensor PT100
Time range 099h99min 
Top Plat Size 168 x 168mm
Display LCD 
Motor Type Bushless Motor
Operating Mode Temperature Speed Timing Memory last data 
Power 500W
Power Supply AC 220V 5060Hz
Packing Dimension 335 x 235 x17cm 
Weight 25kg

Magnetic stirrer

With the unique magnetic circuit and special high performance alnico treated by special technology, it can resist high-temperature with long life.
Using mechanical drive for stir, lift and movement, it can wok reliably, safely and environmental protection.
Using the alternatively clockwise and anticlockwise, the solution can be stirred effectively with adjustable speed and interval. The depth can achieve more than 100-700mm.
The electric consumption for our permanent magnetic stirrer is less than 5 percent of electromagnetic stirrer under the same tonnage.
Matching with the perfect wind-cooling system, the working temperature can be controlled within 65.
High efficiency, continuous work. It can work for many functions at different time.
Equipped with the advanced remote controlling system, it has a high degree of automation and its operation is simple and convenient.



Standard packing

Speed range[rpm] 0-1100;
Stirring point position quantity: 5/10/15
stirring quantity(H2O)[L]4
brushless motor

Ms300/ms400
Maximum stirring volume: 0~2000ml
Stirring speed range: 0~1250rpm
Top plate size: 135mmíß135mm
Panel material: steel
Temperature: 0 to 300íµ/400íµ
Accuracy: ía1íµ(<100íµ), ía3íµ(<400íµ)
Timer: 999 minutes
Stirring bar's dimensions: 30(l)íßdia.7mm
Power requirements: 220vac/50hz
Dimensions: 230(l)mmíß180(w)mmíß120(h)mm
Weight: 2.7kg.

Electromagnetic stirrer (EMS)

In principle, electromagnetic stirrer (ems) can be regarded as a rotary motor stator and liquid steel as rotator. Ems is placed lower in the mould to make the liquid metal rotate in the mold. The magnetic field penetrates the copper mould tube, stainless steel baffle tube, and any solidified shell and gives rise to induced currents in the melt. These interact with the traveling magnetic field and create a torque on and by that a movement of the molten steel. General speaking, ems can be usually placed in one of three locations (refer to drawing below):
Ems locaction

1. Mould electromagnetic stirrer (mems): ems is mounted outside copper tube.
2. Strand electromagnetic stirrer (sems): ems is mounted outside billet.
3. Final electromagnetic stirrer (fems): ems is mounted outside billet.
We seldom use the second mode now, but usually use the first or the third one, or use the two sorts in the same time.The metallurgical effects differ from different locations.

Metallurgical effects
Stirrer location Metallurgical effects Steel variety
Mems 1. Increase equiaxed zone.
2. Decrease air holes under surface.
3. Improve the central porosity and segregation

Low alloy steel
Spring steel
Cold rolled steel
Medium, high carbon steel
Sems 1. Increase equiaxed zone
2. Decrease inner cracks
3.Improve the central segregation, shrinkage and porosity

Stainless steel
Tool steel
Fems 1. Improve equiaxed zone
2. Improve central segregation, porosity and shrinkage

1.Ceramic platforms, excellent quality
2.nonradiative, acid proof, alkali proof , easily clean
3.LED display Temperature, speed and time
4.With Time and date record, max time: 9999mins
5.Widely used in laboratory for chemicals liquid heating and mixing.

Are you looking for budget-friendly, compact and efficient magnetic stirrer lab equipment? If yes, you should surely check out the Smart I Stir 1P from ILAB. This laboratory magnetic stirrer from ILAB is precisely developed to suit different research laboratory requirements. It has a compact motorless construction, and it uses powerful magnetic energy for the stirring operation. Due to the lack of moving parts, the I Stir 1P lasts long and performs uniformly with little to no maintenance. In case of a power failure, the system pauses the stirring and resumes operation once the power is restored. Other features include a large digital display for speed and time and smooth touch-sensitive controls.

So, if you need a reliable magnetic stirrer in laboratory, the Smart I Stir 1P is the one to go for. Contact us at ILAB now and get budget-friendly rates and world-class equipment for your laboratory.

Speed Limit 15-1500 RPM
Stirring Position 1
increment and decrements 50 RPM
Display Digital LED
Working Plate Material SS Plate
Setting Dia. 105 mm
Maximum Stirring Capacity 800 ml H20
Recommended Stirrer Bar Size 25x8mm PTFE Coated
Pulse Mode 30 second auto reverse direction
Timer 99 Minuits and Infinit�© Mode
Last run Memory Save Yes
Protection Class IP65
Permissible Ambient Temp 5 �°C to 40 �°C
Permissible relative Humidity 80%
Standard Accessories stirrer Bar 1 piece, 9V 1.5 power adaptor, Operation Manual
Voltage 100-240 VAC
Frequency 50/60 Hz
Weight 0.3 Kg
Dimension(WxDxH) 162x12x110 mm

Speed Range:0~1500r/min
Work Surface:|¦Ì120mm
Power:8W
Power Supply:220V50Hz


Use and maintenance:

1.Will be loaded with needs the intermixture and the agitation trial bottle (or other household utensils ) places the working surface panel.

2.Puts through the power source ,closes the power switch ,the indicating lamp is bright.

3.The adjustment agitation knob ,rises to need the speed .The bidirectional agitation may according to the actual need choice .

4.The work finished ,puts in the knob the minimum value ,closure all switches.Long-term without disconnecting the power.

5.Clearing kneading board.