Buyer is interested to receive quotations for the following RFQ -
Product: Shipping Containers
Specifications:
20' And 40' Containers.
Qty: MOQ
Note: You send a laden container to use our agent or other shipping agent, I will receive from them after emptying the depot if another agent by DI and if your own agent (i.e. our company) then no need DI. I will pay your local agent in Bangladesh.
Please provide a quotation to the following requirement from importer -
Shipping Container Sphere Parts
Specifications :-
Type - Shipping Container Sphere Parts Like Corner Casting
Corner Posts 0.08 2.591 Corten Steel Vertical support at corners
Side Panels 6.058 2.39 Corten Steel Side walls of the container
Front Panel 2.34 2.39 Corten Steel Front wall opposite the doors
Roof Panel 6.058 2.34 Corten Steel Top covering of the container
Flooring 6.058 2.34 Wood/Steel Typically wood or steel
Doors (each) 1.194 2.261 Corten Steel Rear access to the container
Top Rail 6.058 Corten Steel Horizontal support at the top
Bottom Rail 6.058 Corten Steel Horizontal support at the bottom
Corner Castings 0.178 0.178 Corten Steel Corner fittings for lifting, stacking, and securing
Cross Members 2.34 0.04 Corten Steel Support beams under the floor
Side Rails 6.058 0.16 Corten Steel Horizontal support along the sides
Door Locking Bars 2.52 Steel Bars for securing the doors
Seal Gaskets 0.04 Rubber Around door edges for sealing
Ventilation Slots 0.3 0.1 Corten Steel For air circulation
Corner Fittings 0.178 0.178 Corten Steel Corner fittings for stacking
Locking Assemblies 1.6 0.05 Steel Assemblies to secure container doors
Floor Beams 2.34 0.15 Steel Support structure under the flooring
Roof Bows 2.34 0.05 Corten Steel Curved beams supporting the roof panel
Door Hinges 0.3 0.05 Steel Hinges for door movement
Lashing Rings 0.05 Steel Rings for securing cargo inside
Forklift Pockets 0.36 0.1 Steel Openings for forklift tines
Additional
Twist Locks
Door Fittings
Container Booster
Door Lockset
Roof
Container doors
Shipping container Panels
Container ventilators
Cargo doors
Container Casters
Floor
Panels
csc PLATES
Container accesories
Container door hinges
Sides
Quantity - 100 pcs initially
Buyer is interested to receive quotations for the following RFQ -
Product Name: 20ft ISO Shipping Container
Specifications :
A. External Dimension
1) Length 20 Ft (6.10m)
2) Width 8 Ft (2.44m)
3) Height 8 Ft 6- 1/2 Inch (2.60m)
B. Internal Dimension.
1) Length 19 Ft 3 ¾ Inch (5.89m)
2) Width 7 ft 8 inch (2.34 m)
3) Height 7 ft 8-10/11 inch (2.36m)
c. Capacity
1) Gross Weight 23900 kg to 24050 kg
2) Tare Weight 1900 Kg To 2050 Kg
3) Pay Load 24000 Kg
D .free Space 1169 Cft/33.1 Cumtr
E. Design Requirements.
1) Corner Fitting All Containers Shall Be Equipped With Top And Bottom Corner Fittings.
2) Base Structure
All Containers Shall Be Equipped With And Bottom Corner Fitting
Aii Containers Shall Also Be Capable Of Being Supported Only By Load Transfer Areas In Their Base Structure. Lt Should Be As Follows:
A. Minimum 4 Pairs. One Pair At Each And Plus 2 Intermediate Pairs.
B. Intermediate Pair Should Be Between 1700mm To 2000mm
(66- 15/16 Inch To 78¾ Inch) From Each End.
C. Door each Container Will Be Provided With A Door Opening And Lock System:
(1) Width = 7 Ft 8 Inch (2.34m)
(2) Height = 7 Ft 8-11/22 Inch (2.26m)
D. Fork Lift Pockets. each Container Will Have Two Set Of Forklift Pockets As Per Following:
1) Length:
A. 14 Inch /335 Mm (large Pocket For Loaded Container)
B. 12 Inch /305 Mm (small Pocket For Unloaded Container)
2) Height (clear Opening).
A. 4 Inch /115mm (for Loaded Container)
B. 4 Inch /102mm (for Unloaded Container)
3) Distance Between Two Pockets (for The Centre Point Of The Pocket).
A. 81 Inch/2050mm (for Loaded Container)
B. 35 Inch 2/900mm (for Unloaded Container)
4) Distance From The Base Plane.
A. 8 Inch/200 Mm (for Both)
Qualifying Requirements
Each Container Will Have Following
Requirement:
A. Capable Of Stacking Eight Containers In One Stack.
