desk type fume hood 1500*850*2330 *1 set
desk type fume hood (top cabinet) 1500*850*1500 *1 set
worktop 1258*705*20/25 *1 piece
inner embedded door storage cabinet (bottom cabinet) 750*500*830 *2 pcs
accessories
wall type water supply faucet 1set
wall type gas supply faucet 1 set
five hole socket 220V 4 pcs
cup sink 1 set
inner embedded door bottom cabinet layer plate 745*440*18 2 piece
fume hood bottom cabinet side sealed plate 285*830*18 2 piece
Horizontal Laminar complete SS 304 GMP model.Provides a horizontal air flow parallel to work table with proven protection to the sample and processes with H-14 Minipleat HEPA Filters with 99.999% efficiency down to 0.3.
Features
Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 conditions.
Cabinet is fabricated of stainless steel (SS-304grade)
Working table is made of Stainless Steel Sheet (SS-304 grade).
Front doors are made out of thick transparent plexiglass.
Heavy Duty Motor operates with a minimum noise level.
Working area is illuminated by fluorescent lighting fitted to the unit.
Supplied complete with S.S. Satin finish Table Top, Transparent front door, Static Pressure Manometer, Built-in U.V. Germicidal light and Cock for gas, air or vacuum line, HEPA filters and pre-filter.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters. The prefilter fitted extends the life of the HEPA filter drastically. Fitted with HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU â?? 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
With Solid Side Walls and transparent front door.
To work on 220/230 volts A.C. supply.
Technical specifications
Main filter: HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU - 14 Grade, with an efficiency rating better than 99.999% for 0.3. These filters are designed to accommodate higher air flow volume.
Prefilter: Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Illumination: Fluorescent Lamp 40W
Sterilizing: UV Germicidal Tube.
Front door: Made of Plexi Glass
Utility: Gas/Air cock
Supply Voltage & Frequency : AC 230V, 50/60 Hz
Work Table: Stainless Steel (SS-304 grade)
Fume Hoods are designed to function as an enclosed ventilated workspace- can provide a substantial degree of protection for the experimenter.It is designed so as to throw-out all toxic harmful vapour, acidic/alkaline fumes, chemical vapors, removal of odour etc from the hood working area, thus protecting costly instruments and the person working in the lab.
Fume Hoods are designed to function as an enclosed ventilated workspace- can provide a substantial degree of protection for the experimenter.It is designed so as to throw-out all toxic harmful vapour, acidic/alkaline fumes, chemical vapors, removal of odour etc from the hood working area, thus protecting costly instruments and the person working in the lab.
Made of Complete SS 304 GMP Model.Down flowing Minipleat HEPA filttered air with 99.999% down to 0.3 �¼ guarantees sample protection. Ideal for applications in microbiology, biotechnology, foresic, research labs, hospitals etc.
Features
Designed so as to meet the requirements of US Federal Standard 209 B (BS 5295) providing particle free air to meet class 100 conditions.
Cabinet is fabricated of SS 304
Working table is made of Stainless Steel Sheet (SS-304 grade).
Front door is made out of thick transparent plexiglass.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters having an efficiency rating.
Heavy Duty Motor operates with a minimum noise level.
Using a dynamic machine, the blower and motor assembly are statically & dynamically balanced.
Working area is illuminated by fluorescent lighting fitted to the unit.
Supplied complete with S.S. Table Top, Transparent front door, Static Pressure Manometer, Built-in U.V. Germicidal light and Cock for gas, air or vacuum line, HEPA filters and pre-filter.
Air drawn through pre-filter is made to pass through highly effective HEPA (High-Efficiency Particular Air) filters. The prefilter fitted extends the life of the HEPA filter drastically. Fitted with HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU â?? 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU â?? 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Mounted on heavy tubular stand with lockable castors.
With Solid Side Walls and transparent front door.
To work on 220/230 volts A.C. supply.
Technical specifications
Purity: Confirming to class 100 conditions
Main filter: HEPA Filter made from water-resistant, fire retardant, imported microfine glass fiber media; conforms to EU - 14 Grade, with an efficiency rating better than 99.999% for 0.3 �¼. These filters are designed to accommodate higher air flow volume.
Prefilter: Prefilter is made from Non-Woven Synthetic with HDPE mesh and Al expanded mesh on air leaving side; conforms to EU â?? 4 / G-4 Grade, with the efficiency of down to 10 microns. These filters can be cleaned by compressed air & also washable.
Illumination: Fluorescent Lamp 40W
Sterilizing: UV Germicidal Tube.
Utility: Gas/Air cock
Supply Voltage & Frequency: AC 230V, 50/60 Hz
Fume Hoods are designed to function as an enclosed ventilated workspace- can provide a substantial degree of protection for the experimenter.It is designed so as to throw-out all toxic harmful vapour, acidic/alkaline fumes, chemical vapors, removal of odour etc from the hood working area, thus protecting costly instruments and the person working in the lab
SALIENT FEATURES & CONSTRUCTION OF FUME HOOD
Low Cost.
Low Noise..
User Friendly Ergonomic Design.
Generates a negative pressure inside the hood thus facilitating removal of all contaminants from the works area, into the atmosphere.
Basic material is thick board wood front back top and exterior surfaces are covered with Cold rolled steel duly powder coated
All interior surfaces are sealed and checked for leakage.
Work table is made of High Quality Granite and is fitted with a small S.S. sink with water tap connections.
Working area is illuminated by fluroescent lighting fitted to the unit.
The front door moves vertically up and down with concealed counter balanced weight.
The blower and motor assembly is statically and dynamically balanced & operates with minimum noise level.
Height of the working table provides comfortable "SIT DOWN" working position for the operator.
The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light.
Supplied complete with cord & plug to work on Single Phase 220 / 230 volts A.C. supply.
Front Door Moves vertically up and down with concealed counter balanced weight/by Hinges
Fitted with acid/alkali resistant tile and SS sink fitted with swan type water tap.
Fume Hoods are designed to function as an enclosed ventilated workspace- can provide a substantial degree of protection for the experimenter.It is designed so as to throw-out all toxic harmful vapour, acidic/alkaline fumes, chemical vapors, removal of odour etc from the hood working area, thus protecting costly instruments and the person working in the lab.
SALIENT FEATURES & CONSTRUCTION OF FUME HOOD
Low Cost.
Low Noise.
User Friendly Ergonomic Design.
Generates a negative pressure inside the hood thus facilitating removal of all contaminants from the works area, into the atmosphere.
Basic material is thick board wood front back top and exterior surfaces are covered with Cold rolled steel duly powder coated
All interior surfaces are sealed and checked for leakage.
Work table is made of High Quality Granite and is fitted with a small S.S. sink with water tap connections.
Working area is illuminated by fluroescent lighting fitted to the unit.
The front door moves vertically up and down with concealed counter balanced weight.
The blower and motor assembly is statically and dynamically balanced & operates with minimum noise level.
Height of the working table provides comfortable "SIT DOWN" working position for the operator.
The front facing panel is fitted with 15/5 Amp socket with switches for exhaust system and fluorescent light.
Supplied complete with cord & plug to work on Single Phase 220 / 230 volts A.C. supply.
Front Door Moves vertically up and down with concealed counter balanced weight/by Hinges
Fitted with acid/alkali resistant tile and SS sink fitted with swan type water tap.
