Sand blasting abrasives Fused brown alumina BFA Brown fused alumina is made of bauxite/anthracite coal. Abrasive tools made by brown fused alumina are suitable for metal with high tensile(like: steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting precision casting, and also for refractory material. Brown fused alumina with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength.
Brown Fused alumina is bauxite, coke, anthracite as main raw materials, made more than 2000 degrees high temperature melting, hitches in arc through the mill grinding, plastic, magnetic separation to iron, screen is divided into a variety of particle size, dense texture, high hardness, particle formed globular.High consolidation is suitable for making ceramic, resin abrasive and grinding, polishing, sandblasting, precision casting, etc., can also be used for manufacturing advanced refractories
BFA brown fused alumina Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength. Chemical analysis: Al2O3(min) 92% SiO2(max) 2% Fe2O3(max) 2% TiO2(max) 4% Physical characteristics: color Brown Mohs Hardness 9.0 Melting point 2250 Maximum service temperature 1850 Bulk density 1.53-1.99g/cm3 Specific gravity 3.6-3.9g/cm3 Purpose: 1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware 2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium 3.bonded abrasives and coated abrasives 4.surface preparation and finishing 5.Thermal Spraying(Plasma Spraying) 6.Super Refractories, Ceramics and Tiles 7.Lapping & Micro-blasting applications Other models: Grain 0-1mm 1-3mm 3-5mm 5-8mm Fine powder 0-100mesh 0-200mesh 0-320mesh Grit 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder (FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
Brown fused alumina polishing Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength. Chemical analysis: Al2O3(min) 92% SiO2(max) 2% Fe2O3(max) 2% TiO2(max) 4% Physical characteristics: color Brown Mohs Hardness 9.0 Melting point 2250â?? Maximum service temperature 1850â?? Bulk density 1.53-1.99g/cm3 Specific gravity 3.6-3.9g/cm3 Purpose: 1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware 2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium 3.bonded abrasives and coated abrasives 4.surface preparation and finishing 5.Thermal Spraying(Plasma Spraying) 6.Super Refractories, Ceramics and Tiles 7.Lapping & Micro-blasting applications Other models: Grain 0-1mm 1-3mm 3-5mm 5-8mm Fine powder 0-100mesh 0-200mesh 0-320mesh Grit 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder (FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
brown fused alumina grinding Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength. Chemical analysis: Al2O3(min) 92% SiO2(max) 2% Fe2O3(max) 2% TiO2(max) 4% Physical characteristics: color Brown Mohs Hardness 9.0 Melting point 2250â?? Maximum service temperature 1850â?? Bulk density 1.53-1.99g/cm3 Specific gravity 3.6-3.9g/cm3 Purpose: 1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware 2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium 3.bonded abrasives and coated abrasives 4.surface preparation and finishing 5.Thermal Spraying(Plasma Spraying) 6.Super Refractories, Ceramics and Tiles 7.Lapping & Micro-blasting applications Other models: Grain 0-1mm 1-3mm 3-5mm 5-8mm Fine powder 0-100mesh 0-200mesh 0-320mesh Grit 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder (FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
BFA Brown fused alumina Brown aluminum oxide crystals is made of bauxite/anthracite coal, and smelted in electric-arc furnace of high temperature more than 2000degrees.Abrasives tools made by brown fused alumina are suitable for metal with high tensile (like:steel, malleable iron, bronze etc).and suitable for grinding, polishing, blasting, precision casting etc.Brown aluminum oxide crystal is also used for refractory material. Brown aluminum oxide crystals with characteristics like: high purity, good crystalline liquidity, low coefficient of linear expansion, corrosion resistance, high temperature, high strength. Chemical analysis: Al2O3(min) 92% SiO2(max) 2% Fe2O3(max) 2% TiO2(max) 4% Physical characteristics: color Brown Mohs Hardness 9.0 Melting point 2250â?? Maximum service temperature 1850â?? Bulk density 1.53-1.99g/cm3 Specific gravity 3.6-3.9g/cm3 Purpose: 1.grinding for konescope/glass/monocryst alline silicon/lens/jadeware 2.abrasion-proof material for expressway/airstrip/dock/ parking lot/stadium 3.bonded abrasives and coated abrasives 4.surface preparation and finishing 5.Thermal Spraying(Plasma Spraying) 6.Super Refractories, Ceramics and Tiles 7.Lapping & Micro-blasting applications Other models: Grain 0-1mm 1-3mm 3-5mm 5-8mm Fine powder 0-100mesh 0-200mesh 0-320mesh Grit 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder (FEPA)F230 F240 F280 F320 F360 F400 F500 F600 F800 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000
Factory direct white fused alumina sand 2-5mm Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Purpose: 1.Bonded abrasives and Coated abrasives 2.Floor/Wall Laminates 3.Thermal Spraying(Plasma Spraying) 4.Lapping & Micro-blasting applications 5.Surface preparation and finishing 6.Super Refractories,Ceramics and Tiles 7.Brake linings Available sizes; Grain: 0-1mm 1-3mm 3-5mm 5-8mm Fine powder: 0-100mesh 0-200mesh 0-320mesh Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder: FEP F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000 Chemical analysis: Al2O3(min) 99% SiO2(max) 0.4% Fe2O3(max) 0.2% Na2O(max) 0.4% Physical characteristics: color white Mohs Hardness 9.0 Melting point 2250 Bulk density 1.75-1.95g/cm3 Real density 3.95g/cm3
china manufacture white fused alumina oxide WFA WA White Fused Alumina,a kind of high-grade refractories, was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling. It is white with the main crystal phase alpha-Al2O3.The white alumina produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Product Name china manufacture white fused alumina oxide WFA WA size 0-1mm 1-3mm 3-5mm 5-8mm -100mesh -200mesh -320mesh Color white Raw Material Aluminum Oxide Al2O3 99% Na2O 0.15-0.35% Fe2O3 0.02-0.08% Mohs Hardness 9.0 Specific Gravity 3.95g/cm3 Bulk Density 1.75-1.95g/cm3
Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Purpose: 1.Bonded abrasives and Coated abrasives 2.Floor/Wall Laminates 3.Thermal Spraying(Plasma Spraying) 4.Lapping & Micro-blasting applications 5.Surface preparation and finishing 6.Super Refractories,Ceramics and Tiles 7.Brake linings Available sizes; Grain: 0-1mm 1-3mm 3-5mm 5-8mm Fine powder: 0-100mesh 0-200mesh 0-320mesh Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000 Chemical analysis: Al2O3(min) 99% SiO2(max) 0.4% Fe2O3(max) 0.2% Na2O(max) 0.4% Physical characteristics: color white Mohs Hardness 9.0 Melting point 2250 Bulk density 1.75-1.95g/cm3 Real density 3.95g/cm3 Contact information E-mail mia@hxabrasive.com Mob 008613592570797 Whatsapp +8613592570797 Wechat 13592570797 Skype Mia Wen
Wholesale white corindon for coated abrasives was made from the high quality alumina by melting above 2000 in the electric arc furnace and cooling.White corindon is white with the main crystal phase alpha-Al2O3.The White corindon produced in titling electric arc furnace has the advantage of high bulk density and low porosity and the volume stability and thermal shock resistance can be improved. Purpose: 1.Bonded abrasives and Coated abrasives 2.Floor/Wall Laminates 3.Thermal Spraying(Plasma Spraying) 4.Lapping & Micro-blasting applications 5.Surface preparation and finishing 6.Super Refractories,Ceramics and Tiles 7.Brake linings Available sizes; Grain: 0-1mm 1-3mm 3-5mm 5-8mm Fine powder: 0-100mesh 0-200mesh 0-320mesh Grit: 8# 10# 12# 14# 16# 20# 22# 24# 30# 36# 40# 46# 54# 60# 70# 80# 90# 100# 120# 150# 180# 220# Micro powder: ï¼?FEPAï¼?F230 F240 F280 F320 F360 F400 F500 F600 F800 F1000 F1200 F1500 (JIS) #240 #280 #320 #360 #400# #500 #600 #700 #800 #1000 #1200 #1500 #2000 #2500 #3000 #4000 #6000 #8000 #10000 Chemical analysis: Al2O3(min) 99% SiO2(max) 0.4% Fe2O3(max) 0.2% Na2O(max) 0.4% Physical characteristics: color white Mohs Hardness 9.0 Melting point 2250 Bulk density 1.75-1.95g/cm3 Real density 3.95g/cm3 Contact information E-mail mia@hxabrasive.com Mob 008613592570797 Whatsapp +8613592570797 Wechat 13592570797 Skype Mia Wen
