Fatih Tutuncu

Specifications Of Railways R50 / R65 :
Second Quality Railway Used Rail
Steel No . 1. Standard Section Tee Rails , Original Weight 50 Pounds Per Yard , Over Heavier , Rails .
Steel No . 2. Cropped Rail Ends , Standard Section , Original Weight 50 Pound Per Yard And Over 12.50 Meters Long .
Ya ) B ) ( 28c ) Rail - Steel No.2 T - Rail Ends Standard Section - Original Weight 50 Pounds Per Yard And Over 12.50 Pounds Per Yard And Over - Rail ,
Steel No.3 , Standard Section Fee , Gender , And / Or Guard Rails , Free From Frog And Switch Rails Not Cut Apart , And Contain No Manganese , Cast , Welds Or Attachment Any Kind Except Angle Bars Also Rails , Not Found And Without Radiation And Explosive Substance ...
( 1.00 - 1.50-2.00-2.50-2.80 Meter )
( R 50 / R65 ) Chemical Composition Shall Be According To
R65 Gost 8165.75 Weight 64.72 Kg / Meter
C = 0.54 % _0.82 %
Si = 0.18_0.40 %
Mn = 0.60 1.05 %
S = 0.04 % _max
P = 0.035 % As - 0.01 Mix Of Mass Share.

R50 Gost 7173.75 Weight 51.67 Kg / Meter
C = 0.54 % 0.82 %
Si = 0.18 0.40 %
Mn = 0.60 1.05 %
S = 0.04 % Max
P = 0.035 % As -0.01 Mix Of Mass Share

Used rail scrap r50-r65 USD 265 CIF ASPW

Products: HMS 1 and HMS 2 Metal Scrap
Grade: AA
Type: Rail Scrap, Casting Irons etc
Metal: 100%
Alloy Or Not: Non-Alloy
Color: Multiolor
Secondary or not: Non-secondary

Used Rail Scrap, HMS1 & 2, Ship Scrap, Aluminum and Copper scrap

SPECIFICATION : R 50 (51.67kg/m-GOST-7173-75)Tree size length, R65(64.72kg/m-GOST- 8165-75)free size length Inco Term 2000. Rails shall conform to ISRI CODE. CODE R50-R65.
COMPOSIITION ; C-0.54-0.82%, Mn-0.60-1.05%, Si-0.18-0.40% S-Not more than 0.04%, P �¢?? Not more than 0.035%.
LENGTH : 12.5 METRES (To be cut to 1-6M as buyer requires sizes)
WEIGHT : 437.5 KG
WIDTH : 5.5 INCHES
TOTAL QUANTITY: 60,00,000MT

Used Rails ( R50 - R65 )


Composition

C - 0.54-0.82%,
SI - 0.18-0.40%,
MN - 0.60-1.05%,
S - 0.04% maximum
P - 0.035% maximum
AS: - 0.01% Maximum of Mass Share



1. Technical terms: USED RAIL R50-R65
2. Specifications and Chemical
Composition:
Used Rail: R50 (51.67KG/Meter, GOST 7173-55),
Used Rail: R65 (64.72KG/Meter, GOST 8161-75).
Size & Weight: Length: 12meter ~ 12.5meter Maximum or less according tobuyerâ??s instruction; Expenses on seller
Width: 5.5 inches ; Weight: 64.72Kg.
No fishplates or steel pieces or bolts are attached to the used rails. All rails are clean and straight.
No pitting.
Only atmospheric rust
No heavy rust. It is mandatory that Rails must be cut into length 1.5 meter(max.) before shipment.



Specifications
ISRI 201 No. 1 : Heavy melting steel 3 feet x 18 inches. Wrought iron and/or steel scrap 1/4 inch and over in thickness, individual pieces not over 36 inches x 18 inches (charging box size) prepared in a manner to insure compact charging.



ISRI 202 No. 1 : Heavy melting steel 5 feet x 18 inches. Wrought iron and/or steel scrap 1/4 inch and over in thickness. Individual pieces not over 60 inches x 18 inches (charging box size) prepared in a manner to insure compact charging.



ISRI 203 No. 2 : Heavy melting steel.* Wrought iron and steel scrap, black and galvanized, 1/8 inch and over in thickness, charging box size to include material not suitable as No. 1 heavy melting steel Prepared in a manner to ensure compact charging.



ISRI 204 No. 2 : Heavy melting steel.* Wrought iron and steel scrap, black and galvanized, maximum size 36 x 18 inches. May include all automobile scrap properly prepared.



ISRI 205 No. 2: Heavy melting steel 3 feet by 18 inches. Wrought iron and steel scrap black and galvanized, maximum size 36 x 18 inches. May include automobile scrap properly prepared, however, to be free of sheet iron or thin-gauged material.


ISRI 206 No. 2: Heavy melting steel 5 feet by 18 inches. Wrought iron and steel scrap black and galvanized, maximum size 60 x 18 inches. May include automobile scrap properly prepared, however, to be free of sheet iron or thin-gauged material.

Specification of Used Rail R50/R65:
Used Rail - GOST R-50-R65
R50 (51.72 Kg / Meter) GOST 7173-55
R65 (64.72 Kg/Meter) COST 8161-75

Chemical Composition of the steel scrap is of international standard as follow:
MN: 0.60 1.05; C: 0.54 0.82; Sl: 0.18 - 0.12; S: 0.04 Max; P: 0.035 max.

MOQ contact: Used rails R50-r65 15,000mt x 12 months
MOQ contact: HMS1/2 15,000mt x 12 months

HMS 1 Quality cut to a max length of 1.3 m and bundled into 1.4 MT packages.

Volume: 10,000 MT to start as trial, then 50,000 MT monthly for 12 months. Options to increase to 100,000 MT monthly once programa commences.

Price: US$360 CIF ASWP (future pricing at EU market less 8â?°)

Our R50/R65 Used Rail is sourced from high-quality materials, perfect for recycling and repurposing in the steel industry. Ideal for export, it provides reliable material for manufacturing and infrastructure projects globally.

Specification
R50 R65 Rail Iron Profile Processing Train Used Rail Railway Track Railroad Steel Rails Railway Scrap Metal for Building
Standard
ASTM
Grade
Q235B
Rail Heigth
120mm
Bottom Width
120mm
Web Thickness
28mm
Head Width
70mm
Length
6m
Place of Origin
China
Zhejiang
Brand Name
zhongding
Type
Heavy Rail
Application
Railway Rail
Weight
QU70
Secondary Or Not
Non-secondary
Tolerance
�±5%
Alloy Or Not
Non-Alloy
Delivery Time
15-21 days
Technique
Hot Rollled
Material
Q235
Length
6m-12m
production mode
forge and press