We specialized in manufacturing the high quality Carbon Steel Flange for more than 20 years since 1993.
We specialized in manufacturing the carbon steel pipe and carbon steel pipe fittings (elbows, reducers, tees, pipe caps, flanges) for more than 20 years since 1993.
More information you can click here.
We also provide Alloy steel Pipe Cap, Alloy Steel Tee, bend Pipe, Seamless bend and soon
* We offer the best quality of Carbon Steel Flanges which are durable and come at affordable rates. Widely appreciated for its supreme quality the range can be availed in different specifications. Topmost priority is given to customer satisfaction and hence the Carbon Steel Flanges are of international standards.
* These flanges have been fabricated keeping in mind the dimensional aspect that leads to further enhancement in terms of work allotted to these products. The carbon steel used in these flanges has been mechanized in an intricate form and has set a presentable look that follows all the functions promisingly.
Pls be informed that we are manufactuer for various kinds Flanges ( Slip on Flange, Plate Flange, Welding Neck Flange, Blind Flange, Socket weld flange, Anchour Flange, Orifice Flange, etc. ) as per standards of ANSI, BS, DIN, EN, JIS, GOST, AS, etc, and as per Clients' drawing. The material can be Carbon steel , Stainless Steel, Alloy Steel, Alumium and Copper , the outside coating can be yellow painting, black painting, blue painting, FEB, Galvanization, etc. Welcoming your detailed inquiry! Thanks!
Flange Connect Type/ Face Type
Raised Face (RF), Ring Type Joint (RTJ), Flat Face (FF), Large Male-Female (LMF), Lap-Joint Face (LJF), Small Male-Female (SMF), Small Tongue, Large Tongue & Groove, Groove
Flange Size Chart
1/2â?³ (15 NB) to 48â?³ (1200NB) DN10~DN5000
Carbon steel flanges are a type of flange that is made of carbon steel. Carbon steel is a type of steel that contains carbon as its primary alloying element. Carbon steel flanges are typically used in applications where strength and durability are important. They are also relatively inexpensive, making them a cost-effective option for many applications.
Technical Specifications
1. Material: Carbon steel
2. Size: �½ Inch to 24 Inch
3. Type: RF, FF, RTJ
4. Pressure rating: Class 150 to 2500
5. Temperature range: -200�°F to 1200�°F
6. Finish: Black, mill scale, or hot dipped galvanized
7. Dimensions: ANSI/ASME B16.5, DIN 2533, or MSS SP-44
Applications
a. Oil and gas pipelines
b. Chemical processing plants
c. Power plants
d. Water treatment facilities
e. HVAC systems
A carbon steel flange is a type of flange that is made of carbon steel. Carbon steel is a type of steel that contains carbon as its primary alloying element. The carbon content in carbon steel can vary from 0.002% to 2.1%, but most carbon steels have a carbon content of between 0.2% and 0.8%.
he following are some of the key technical specifications of carbon steel flanges:
Pressure rating: The pressure rating of a flange is the maximum pressure that the flange can withstand without leaking.
Class: The class of a flange is a measure of the flange's strength. The higher the class, the stronger the flange.
Size: The size of a flange is the diameter of the flange's bore.
Type: There are many different types of carbon steel flanges, including slip-on flanges, weld neck flanges, and socket weld flanges.
Finish: The finish of a flange is the surface texture of the flange. The most common finishes for carbon steel flanges are smooth and rough.
Carbon steel flanges are a versatile and reliable type of flange that can be used in a variety of applications. They are available in a wide range of sizes, classes, and types, so you can find the perfect flange for your needs.
The technical specifications of a carbon steel flange vary depending on the standard that it is manufactured to. Some of the most common standards for carbon steel flanges include:
ASTM A105N (SA105N): This standard specifies the requirements for carbon steel forgings for piping applications.
ASTM A350 LF2: This standard specifies the requirements for low-alloy steel forgings for piping applications.
ASTM A694: This standard specifies the requirements for flanges for high-pressure service.
The following are some of the key technical specifications of carbon steel flanges:
Material: Carbon steel
Pressure rating: Varies depending on the standard
Temperature rating: Varies depending on the material and the standard
Face type: Plain, raised face, or ring joint
Bore size: Varies
Wall thickness: Varies
Finish: Varies
Carbon Steel Forged flanges are a type of flange that is commonly used in high-pressure piping systems. They are designed to be welded or bolted onto the end of a pipe and are typically made from forged steel. Forged flanges are stronger and more durable than cast flanges, making them a better choice for applications where high pressure and/or temperature are present.
Benefits of CS Forged Flanges
â?¢ High strength and durability
â?¢ Better resistance to corrosion and wear
â?¢ Can withstand high pressure and temperature
â?¢ Available in a variety of sizes and materials
Applications of CS Forged Flanges
â?¢ Piping systems
â?¢ Valves
â?¢ Pumps
â?¢ Heat exchangers
â?¢ Pressure vessels
Selection of CS Forged Flanges
When selecting forged flanges, it is important to consider the following factors:
â?¢ The pressure and temperature rating of the piping system
â?¢ The type of material that the flange is made from
â?¢ The size of the flange
â?¢ The type of connection that the flange will be used with
CS Forged flanges are a critical component of many piping systems. They provide a strong and reliable connection between pipes, valves, and other equipment.
Additional Information
â?¢ Forged flanges are typically made from carbon steel, stainless steel, or alloy steel.
â?¢ Forged flanges are available in a variety of sizes, from NPS 1/2 to NPS 24.
â?¢ Forged flanges are available in a variety of pressure ratings, from PN 2.5 to PN 400.
â?¢ Forged flanges are available in a variety of connection types, including slip-on, socket weld, lap joint, threaded, and blind flanges.
Carbon Steel Forged Weld Neck Flange
A carbon steel weld neck flange is a type of flange used in piping systems. It is made from carbon steel, which is a common and widely used material in various industries due to its strength and durability. The weld neck flange is specifically designed to be butt-welded to the pipe, providing a strong and leak-proof connection.
Description
Carbon steel weld neck flange is made of carbon steel with a forging process, It consists of a circular fitting with a protruding rim around the circumference. These flanges are typically butt welded to a pipe, the rim has a series of drilled holes that permit the flange to be affixed to another flange with bolts.
Design: A weld neck flange has a long tapered hub that is welded to the pipe, providing reinforcement and stability to the joint. The flange also has a flat, circular plate with bolt holes to connect it to another flange or equipment.
Welding: The flanges are designed to be welded to the pipe or fitting. The neck of the flange is welded to the pipe, creating a strong and leak-resistant connection.
Size Range: The flanges are available in a wide range of sizes to accommodate different pipe diameters and system requirements.
Applications: Carbon steel weld neck flanges are commonly used in industries such as oil and gas, petrochemical, power generation, and water treatment. They are suitable for high-temperature and high-pressure applications.
Advantages:
Provides excellent structural support and stability to the joint.
Reduces stress concentration at the base of the flange due to its tapered design.
Offers good resistance to corrosion and high temperatures when made from carbon steel.
