Wuxi Yao Hao metal material Co. Ltd. the main stainless steel wire rope, rubber rope, plastic rope, plastic coated stainless steel wire rope, rope, wind cable wire rope, wire rope, rope and other stainless steel light. Wire rope material: SUS310S, 316L, 316, 310, 304, 304L, 303, 303CU, 302, 301, 321, 202, 201, and so on. Stainless steel wire rope specifications: 7 * 1, 6 * 12, 7 * 7, 7 * 19, 17 * 39, 6 * 19+1, 6 * 37+1, 6 * 61+1 etc.. Commonly used 6 strands of wire rope, each by 19, 37 and 61 steel wire composition. Traditionally, two numbers are used to represent the type of wire rope, and a "1" word is added behind it to indicate a core in the middle to increase its softness. [non-standard can be customized according to customer requirements] Appearance quality: the appearance of wire rope, whether or not galvanized, should be required to be smooth, without breaking, twisting evenly, end is not loose, etc., the surface of a single wire shall not be sunken, rust, flattening, bruising and other defects. For smooth steel wire, to protect against corrosion and rust, the surface should be oiled. Features: stainless steel wire rope A. high size precision can reach + 0.01mm; B. with excellent surface quality, good brightness; C. has excellent corrosion resistance, high tensile strength and fatigue strength; D. chemical stability, pure steel, low inclusion content; E. has many characteristics of high temperature resistance and long service life, durable etc., (1) stainless steel wire rope definition: with the prepared steel wire, in the machine, according to the provisions of a number of twist made of single rope, and then with 6 or 8 such shares, with fiber core, again synthesis of rope called wire rope. (2) kinds and uses: the classification methods of wire ropes are more, and the law of classification in different countries is different. There are many kinds of wire ropes, such as wire rope structure, twist direction, surface, application and intensity. The variety of the variety reflects the variety of the use. The twist: right twist (Z), Zuo Nian (S), interactive, interactive right twist (SZ) (ZS), with a left twist right twist (ZZ), left the same twist (SS). According to surface: there are two kinds of smooth and galvanized. Divided by intensity: that is, according to the nominal strength of the monofilament, the wire rope is divided into several grades.
Wuxi Hao Yiu metal main stainless steel rods: stainless steel round bar, stainless steel hexagonal bar, stainless steel bar, stainless steel ground rods, stainless steel bar, stainless steel half rods, stainless steel oval bar, flat bar, angle iron, iron and so on. Stainless steel rod material: SUS316, 316L, 316F, 301, 302, 303, 303F, 303Cu, 304, 304L, 304F, 309S, 310S, 310, 310S, 321, SUS630, SUS631420F, 430F, 416F, 1214, 1215, 45#, 1045, A3. Stainless steel rod specifications: Rod: Ф0.7-Ф300 hexagonal rods: H2-S55mm bar: 2*2-75*75mm. "Non-standard can be customized according to customer requirements" Stainless steel surface requirements:: polishing, grinding, black rod, wire, knurled, pulling the flowers, the company is good, no trachoma, crack-free, uniform hardness, good machinability, corrosion protection performance. My company has been adhering to the "quality of survival, to the integrity and development" business philosophy, the highest quality-best prices, back to old and new customers. Company products are widely used in home appliances, kitchen equipment, food, medical devices, metal hose, shipping, computer accessories, cell phone parts, machinery manufacturing, automotive parts and construction, industry and other fields. Company based on customer-oriented, customer first, honest, thought of this, take the quality as the life, pay attention to after-sale tracking service, mutual benefit, common development is our service. Your phone, fax us a bridge, your needs, that is my responsibility, look forward to serving you, create brilliance! if you want more information, please contact our company.
Thickness: 0.02mm-4mm, width: 3.5mm-1550mm, can be customized by non standard! With the domestic stainless steel (imported) stainless steel strip: stainless steel tape, stainless steel strip, stainless steel stamping, precision stainless steel belt, stainless steel belt, stainless steel mirror cold rolled, hot rolled stainless steel, stainless steel, stainless steel belt, stretching with etched polished stainless steel belt, stainless steel belt, stainless steel belt, hard soft hard belt, stainless steel in high temperature resistant stainless steel belt. Cold rolling strip Take 1. "stainless steel belt / coil" as raw material and rolled into cold rolling mill at room temperature. The conventional thickness ranged from and the width was from ; 2. [cold rolled steel strip / coil] has the advantages of smooth surface and smooth surface, high dimensional accuracy and good mechanical properties. The products are mostly rolled and can be processed into coated steel sheets; 3.The production process of cold rolled stainless steel strip / roll: 1, pickling, rolling, lubrication, and process at room temperature. The formation and the annealing, cutting, packaging, but the arrival of the hands of customers. Hot rolled 1.A strip of steel with thickness 1.80mm-6.00mm and width 50mm-1200mm is made by hot rolling mill. 2.[hot rolled strip / sheet] has the advantages of low hardness, easy processing, good ductility and so on. 3.The production process of hot-rolled stainless steel strip / roll: 1. The high temperature lubricating rolling, pickling, annealing, 3, 4, smooth process, the precision cutting and packaging, but the arrival of the hands of customers. Difference between hot and cold
Thickness: 0.02mm-4mm, width: 3.5mm-1550mm, can be customized by non standard! With the domestic stainless steel (imported) stainless steel strip: stainless steel tape, stainless steel strip, stainless steel stamping, precision stainless steel belt, stainless steel belt, stainless steel mirror cold rolled, hot rolled stainless steel, stainless steel, stainless steel belt, stretching with etched polished stainless steel belt, stainless steel belt, stainless steel belt, hard soft hard belt, stainless steel in high temperature resistant stainless steel belt. Cold rolling strip Take 1. "stainless steel belt / coil" as raw material and rolled into cold rolling mill at room temperature. The conventional thickness ranged from and the width was from ; 2. [cold rolled steel strip / coil] has the advantages of smooth surface and smooth surface, high dimensional accuracy and good mechanical properties. The products are mostly rolled and can be processed into coated steel sheets; 3.The production process of cold rolled stainless steel strip / roll: 1, pickling, rolling, lubrication, and process at room temperature. The formation and the annealing, cutting, packaging, but the arrival of the hands of customers. Hot Rolled 1.A strip of steel with thickness 1.80mm-6.00mm and width 50mm-1200mm is made by hot rolling mill. 2.[hot rolled strip / sheet] has the advantages of low hardness, easy processing, good ductility and so on. 3.The production process of hot-rolled stainless steel strip / roll: 1. The high temperature lubricating rolling, pickling, annealing, 3, 4, smooth process, the precision cutting and packaging, but the arrival of the hands of customers. Difference between hot and cold 1.The strength and yield ratio of cold rolled steel strip are good, and the ductility and toughness of hot rolled strip are good. 2.The surface quality, appearance and size accuracy of cold rolled steel strip are superior to those of hot rolled plate. 3.The thickness of cold-rolled steel strip is super thin, and the thickness of hot rolling is larger.
Wuxi Hao Yiu metal main stainless steel tubing: seamless tubes, capillary tubes, precision tubes, mirror, decorative tube pipe, welded pipe, industrial pipes, sanitary pipe, square tube, tube light, tube, rectangular tube, and so on. I produced the food inside and outside polished seamless pipe, fittings, tees, valves, elbows; low/middle-pressure boiler steel tubes, high-pressure boiler steel pipe, alloy steel tubes, oil cracking tube, geology, such as steel and other steel. Stainless steel: SUS201, 202, 301, 304, 304L, 316, 316L, 321, 309S, 310, 310S, 317L, 430, 630, 840, 904L First Mechanical construction and decorative stainless steel steel import levels are SUS201, 202ï¼? 304L, 321ï¼?316, 316L ï¼?310S ï¼?430 1, and round tube: 9.5-406.4mm thickness: 0.4-12.0 mm 2, and square: 10*10-150*150mm thickness 0.4-6.0mm 3, and moment tube: 10*20-100*200mm thickness: 0.4-6.0mm 4, and spent tube: 15.9-76.2mm thickness: 1.0-1.5mm 5, and hair fine tube: 0.2-15mm Wall thickness 0.05-1.0mm 6: specifications: Ñ?1--830mm, thickness 0.1--20mm "non-standard can be customized according to customer requirements" Second, industrial piping stainless steel standard: ASTM A312 ASTM A778 GB/T12771 material: material at the import level 201.304 304L 316 316L size: Ï?13.72~Ï?1000mm products used: chemical, petrochemical, water treatment, pulp and paper, food and sanitary equipment piping. Thirdly stainless steel, boilers, heat exchangers, condenser tube standard: ASTM A249 JIS DIN 17457 or G3463 material: material 304 304L 316 316L at the import level: Ï?13.72~Ï?1000mm products used: construction of high pressure and ultra high pressure boilers, construction of superheated steam, tubes in boiling water and superheated steam locomotive boiler tubes Lastly stainless steel seamless steel tube products according to GB GB/T14976-2002 (fluid transport stainless steel seamless pipe), GB/T14975-2002 (stainless steel seamless tubes for structures), GB/T13296-91 (stainless steel seamless tubes for boilers, heat exchangers), finished products undergo stringent testing, meeting the national standard of technical requirements. Material 321/1Cr18Ni9Ti, 304/0Cr18Ni9, 310S/0Cr25Ni20, and 316L/00Cr17Ni14Mo2, 301, 304L level of the stainless steel tube is made of imported materials made in stainless steel sheet, features: no Chlamydia trachomatis, no sand, no spots, no cracks, welds smooth. Bending, cutting, welding performance, stable nickel content, the product conforms to China GB, ASTM, Japan JIS standard of the United States!: Baoshan Iron and steel, ZhangPu. Po. Nippon Steel, Malaysia, the United States and the European Union countries.
Wuxi hao yiu metal main stainless steel rods: stainless steel round bar, stainless steel hexagonal bar, stainless steel bar, stainless steel ground rods, stainless steel bar, stainless steel half rods, stainless steel oval bar, flat bar, angle iron, iron and so on. Stainless steel rod material: sus316, 316l, 316f, 301, 302, 303, 303f, 303cu, 304, 304l, 304f, 309s, 310s, 310, 310s, 321, sus630, sus631420f, 430f, 416f, 1214, 1215, 45#, 1045, a3. Stainless steel rod specifications: rod: ð¤0.7-ð¤300 hexagonal rods: h2-s55mm bar: 2*2-75*75mm. "non-standard can be customized according to customer requirements" Stainless steel surface requirements:: polishing, grinding, black rod, wire, knurled, pulling the flowers, the company is good, no trachoma, crack-free, uniform hardness, good machinability, corrosion protection performance. My company has been adhering to the "quality of survival, to the integrity and development" business philosophy, the highest quality-best prices, back to old and new customers. Company products are widely used in home appliances, kitchen equipment, food, medical devices, metal hose, shipping, computer accessories, cell phone parts, machinery manufacturing, automotive parts and construction, industry and other fields. Company based on customer-oriented, customer first, honest, thought of this, take the quality as the life, pay attention to after-sale tracking service, mutual benefit, common development is our service. Your phone, fax us a bridge, your needs, that is my responsibility, look forward to serving you, create brilliance! if you want more information, please contact our company.
Wuxi yao hao metal material co. Ltd. The main stainless steel wire: wire, wire, spring wire, screw line, cord, piano wire, fine line, light line, car axis, hard line, line, electrolytic hydrogen back line, carbon steel wire, galvanized wire, annealed wire, square wire, flat wire, half round wire, brass wire, aluminum wire, nickel wire. The hardness of the line has several kinds: all soft, 1/4 hard, semi hard, 3/4 hard, full hard and ultrahard. Stainless steel wire material: 201, 202, 301, 302, 302hq, 304, 304l, 304h, 310, 310s, 316, 316l, 410, 430 and so on. Line diameter: 0.025-14. Can be adjusted straight cut. Straight wall thickness 0.05, length 10mm Stainless steel wire rod has unique features: 1., complete product specifications, material diversity 2. Surface quality, good brightness 3., high dimensional accuracy, up to + 0.01mm 4., strong corrosion resistance, tensile strength and high fatigue resistance 5. Packing well, the price is favorable 6. Non standard can be customized according to customer requirements My company's 10 machines, processing (flat line, square line, semicircle line) straightening, cutting. Acting import wire: stainless steel wire (br, s-co, ni-co), qin steel wire (swp-a/b/g), high carbon steel wire (swc70/80/67b) and nickel plated high carbon steel wire (ni-swc), japan fine wire, nickel plated steel wire, stainless steel wire, nickel plated carbon steel wire. The company's domestic steel wire specifications 0.1-10.0 into harmonica wire specifications: 0.1-7.0 domestic stainless steel wire specifications: 0.03-13.0 imported stainless steel wire specifications 0.05-8.0
Wuxi yao hao metal material co. Ltd. The main stainless steel wire rope, rubber rope, plastic rope, plastic coated stainless steel wire rope, rope, wind cable wire rope, wire rope, rope and other stainless steel light. Wire rope material: sus310s, 316l, 316, 310, 304, 304l, 303, 303cu, 302, 301, 321, 202, 201, and so on. Stainless steel wire specifications:.. Commonly used 6 strands of wire rope, each by 19, 37 and 61 steel wire composition. Traditionally, two numbers are used to represent the type of wire rope, and a "1" word is added behind it to indicate a core in the middle to increase its softness. [non-standard can be customized according to customer requirements] Appearance quality: the appearance of wire, whether or not galvanized, should be required to be smooth, without breaking, twisting evenly, end is not loose, etc., the surface of a single wire shall not be sunken, rust, flattening, bruising and other defects. For smooth steel wire, to protect against corrosion and rust, the surface should be oiled. Features: stainless steel wirea. High size precision can reach + 0.01mm; b. With excellent surface quality, good brightness; c. Has excellent corrosion resistance, high tensile strength and fatigue strength; d. Chemical stability, pure steel, low inclusion content; e. Has many characteristics of high temperature resistance and long service life, durable etc., (1) stainless steel wire rope definition: with the prepared steel wire, in the machine, according to the provisions of a number of twist made of single rope, and then with 6 or 8 such shares, with fiber core, again synthesis of rope called wire rope.
Wuxi Yao Hao metal material Co. Ltd. the main stainless steel wire rope, rubber rope, plastic rope, plastic coated stainless steel wire rope, rope, wind cable wire rope, wire rope, rope and other stainless steel light. Wire rope material: SUS310S, 316L, 316, 310, 304, 304L, 303, 303CU, 302, 301, 321, 202, 201, and so on. Stainless steel wire rope specifications: 7 * 1, 6 * 12, 7 * 7, 7 * 19, 17 * 39, 6 * 19+1, 6 * 37+1, 6 * 61+1 etc.. Commonly used 6 strands of wire rope, each by 19, 37 and 61 steel wire composition. Traditionally, two numbers are used to represent the type of wire rope, and a "1" word is added behind it to indicate a core in the middle to increase its softness. [non-standard can be customized according to customer requirements] Appearance quality: the appearance of wire rope, whether or not galvanized, should be required to be smooth, without breaking, twisting evenly, end is not loose, etc., the surface of a single wire shall not be sunken, rust, flattening, bruising and other defects. For smooth steel wire, to protect against corrosion and rust, the surface should be oiled. Features: stainless steel wire rope A. high size precision can reach + 0.01mm; B. with excellent surface quality, good brightness; C. has excellent corrosion resistance, high tensile strength and fatigue strength; D. chemical stability, pure steel, low inclusion content; E. has many characteristics of high temperature resistance and long service life, durable etc., (1) stainless steel wire rope definition: with the prepared steel wire, in the machine, according to the provisions of a number of twist made of single rope, and then with 6 or 8 such shares, with fiber core, again synthesis of rope called wire rope. (2) kinds and uses: the classification methods of wire ropes are more, and the law of classification in different countries is different. There are many kinds of wire ropes, such as wire rope structure, twist direction, surface, application and intensity. The variety of the variety reflects the variety of the use. The twist: right twist (Z), Zuo Nian (S), interactive, interactive right twist (SZ) (ZS), with a left twist right twist (ZZ), left the same twist (SS). According to surface: there are two kinds of smooth and galvanized. Divided by intensity: that is, according to the nominal strength of the monofilament, the wire rope is divided into several grades. Pay attention to the following when using pulley steel rope: (1) when the wire rope passes through the pulley block, the diameter of the pulley should be 1~1.25 times larger than the diameter of the rope;
Features: stainless steel wire rope A. high size precision can reach + 0.01mm; B. with excellent surface quality, good brightness; C. has excellent corrosion resistance, high tensile strength and fatigue strength; D. chemical stability, pure steel, low inclusion content; E. has many characteristics of high temperature resistance and long service life, durable etc., (1) stainless steel wire rope definition: with the prepared steel wire, in the machine, according to the provisions of a number of twist made of single rope, and then with 6 or 8 such shares, with fiber core, again synthesis of rope called wire rope. (2) kinds and uses: the classification methods of wire ropes are more, and the law of classification in different countries is different. There are many kinds of wire ropes, such as wire rope structure, twist direction, surface, application and intensity. The variety of the variety reflects the variety of the use. The twist: right twist (Z), Zuo Nian (S), interactive, interactive right twist (SZ) (ZS), with a left twist right twist (ZZ), left the same twist (SS). According to surface: there are two kinds of smooth and galvanized. Divided by intensity: that is, according to the nominal strength of the monofilament, the wire rope is divided into several grades. Pay attention to the following when using pulley steel rope: (1) when the wire rope passes through the pulley block, the diameter of the pulley should be 1~1.25 times larger than the diameter of the rope; (2) lubrication shall be added to the wire rope periodically to reduce wear and tear; (3) the use of wire rope should be checked and approved in advance. Stainless steel wire rope characteristics: 1., high dimensional accuracy, up to + 0.01mm; 2. surface quality, good brightness; 3., strong corrosion resistance, tensile strength and high fatigue resistance; 4.. Stable chemical composition, pure steel, low inclusion content, good packing and favorable price;
