Pumps
Self Priming Pumps (V-Type) MATERIAL OF CONSTRUCTION: Shaft : S.S. 410, Motor Body : Aluminium / Cast Iron, Impeller : Brass, Casting Parts : Graded Casting, TECHNICAL DETAILS: Head Range : Up To 36 mtrs, Discharge Range : Up To 50 lpm, Delivery : 25 X 25mm, Power Rating : 0.5 H.P., Voltage Range : 180 V TO 240 V (1-Phase). SALIENT FEATURES: Easy To Install, Highly Efficient, Law Power Consumption, Use Graded Varnish To Reduce Corrosion In Stator, Noiseless & vibration free motors, All Parts Machined On CNC Machine Only
Self Priming Pumps (Sharp Type)
Centrifugal Monoblock Pumps Available Up to 2.0 H.P., Specially Design For Low Voltage Range. MATERIAL OF CONSTRUCTION: Shaft : S.S. 410, Motor Body : Graded Cast Iron, Impeller : Graded Cast Iron, Casting Parts : Graded Casting, Roller Bearing : SKF Made Bearing. Thermal Overload Protector Available. TECHNICAL DETAILS: Head Range : Up To 30 mtrs, Discharge Range : Up To 1000 lpm, Suction & Delivery : 25 X 25 mm / 50 X 50 mm / 65 X 50 mm/ 75 X 65 mm, Power Rating : 1 H.P. TO 2 H.P., Voltage Range : 120 V TO 240 V (1-Phase).
Product characteristics 1, the use of a unique single or double impeller structure, greatly improve the ability of dirt through the pump diameter of 5 times the fiber material and the diameter of the pump diameter of about 50% of the solid particles. 2, the mechanical seal uses a new type of hard corrosion-resistant tungsten titanium material, which can make the pump run safely and continuously for more than 8000 hours. 3, the overall structure is compact, small volume, low noise, significant energy saving effect, easy maintenance, no need to build pump room, diving into the water can work, greatly reducing the project cost. 4. The pump seal oil chamber is equipped with a high-precision anti-interference water leakage detection sensor, and the stator winding is embedded with a heat-sensitive element to automatically protect the pump motor. 5, can be equipped with automatic control cabinet according to user needs, the pump water leakage, leakage, overload and overtemperature automatic protection, improve the safety and reliability of the product. 6. The float switch can automatically control the start and stop of the pump according to the required level change, without special care, and it is very convenient to use. 7, WQ type submersible sewage pump can be equipped with double rail automatic coupling installation system according to user needs, it brings more convenience to installation and maintenance, people can not enter the sewage pit for this. 8, can be used in the full head, and ensure that the motor will not overload. 9, there are two different installation methods, fixed automatic coupling installation system, mobile free installation. Main use WQ type submersible sewage pump is suitable for chemical, petroleum, pharmaceutical, mining, paper industry, cement factory, steel mill, power plant, coal processing industry, as well as urban sewage treatment plant drainage system, municipal engineering, construction site and other industries conveyor belt sewage, dirt, can also be used for pumping clean water and corrosive media.
1.ISG vertical pipeline centrifugal pump is used for conveying water and other liquids with physical and chemical properties similar to water. It is suitable for industrial and urban water supply and drainage, pressurized water supply of high-rise buildings, garden sprinkler irrigation, fire pressurization, long-distance transportation, HVAC refrigeration cycle, bathroom and other cold and warm water circulation pressurization and equipment supporting, with the operating temperature T < 80. 2.IRG type vertical hot water pump is suitable for metallurgy, chemical industry, textile, wood processing, paper making, hotel, bathroom, hotel and other boiler high temperature hot water pressurization circulation and urban housing heating circulation pump, the operating temperature is below 120. 3.GRG type vertical high temperature centrifugal pump is widely used in: energy, metallurgy, chemical industry, textile, paper and hotel, bathroom, hotel and other boiler high temperature hot water pressurization circulation and urban housing heating cycle pump, the use temperature below 240. 4.IHG vertical stainless steel pipe centrifugal pump, for the transport of solid particles, corrosive, viscosity similar to water liquid, suitable for petroleum, chemical industry, metallurgy, power, paper, food and pharmaceutical and synthetic fibers and other departments, the use temperature of -20 ~ 120. 5.YG type pipeline oil pump, for transporting gasoline, kerosene, diesel and other petroleum products, the temperature of the transport medium is -20 ~ + 120. 6.IHGB vertical stainless steel explosion-proof chemical centrifugal pump, suitable for transporting flammable chemical liquids. 7.ISGD, IRGD, GRGD, IHGH, YGD, IHGBD vertical low speed centrifugal pump, suitable for occasions with low environmental noise requirements and air conditioning cycle.
Self Priming Pumps (Super Suction Type) Available in 0.5 H.P. & 1 H.P., Head: Up To 50 mtrs, Discharge: Up To 3000 lph, Supply: 1-Phase, Delivery Size : 1 X 1, Winding : Copper (E.C.Grade), Impeller: Brass, Motor Body: Aluminium / Cast Iron, Available With Thermal Over Load Protector (T.O.P.).
Pumps
CDL/CDLF is a versatile product that can transport a variety of different media from tap water to industrial liquids, adapted to different temperature, flow and pressure ranges, CDL is suitable for non-corrosive liquids, CDLF is suitable for slightly corrosive liquids. CDL type light vertical multistage centrifugal pump application field Water supply: water plant filtration and transportation, water plant zoning water supply, supercharging, supercharging of high-rise buildings. Industrial pressurization: process water system, cleaning system, high pressure flushing system, fire protection system. Industrial liquid transport: cooling and air-conditioning systems, boiler feedwater and condensing systems, machine tools, acids and alkalis. Water treatment: ultrafiltration system, reverse osmosis system, distillation system, separator, swimming pool. Irrigation: field irrigation, spray irrigation, drip irrigation. CDL type light vertical multistage centrifugal pump operating conditions 1, thin, clean, non-flammable and explosive liquid that does not contain solid particles or fibers. 2, conveying liquid temperature: room temperature type -15 to +70 3, hot water type +70 to +120 4, ambient temperature: high +40 5. Altitude: 1000m high
