Supplier: Pu foam scrap, memory/ visco foam scrap. rigid foam scrap, pvc foam scrap. pp non woven waste, pvc resin off grade/wet, abrasive garnet, epoxy resin, polyester yarn scrap, raw cotton scrap, quartz ore and sulphur
Services: Distributor of polyurethane trim foam scrap, sulphur, epoxy resin, polyester resin, quartz ore, recycled dacron and abrasive garnet.
Buyer: Pu foam scrap/waste. pu trim foam, polyurethane foam scrap, ldpe/hdpe/pp reprocessed granules, pvc offgrade/ reprocessed/regrind pp non woven scrap, abrasive garnet, quartz ore, sulphur, epoxy resin, polyester resin, and recycled dacron.
Product description: Large expansion Pu foam sealant is an one-component,self-expanding,multipurpose polyurethane foam.This foam will expand and cure by moisture in the air.It is used for a wide range of building applications.It is very good for filling and sealing with excellent mounting capacities,high thermal and acoustical indulation.Higher expansion rate than normal Pu foam. Advabtage: (1)Can apply around 70 meters(30mm*15mm). (2)Most cost effective for each window or door. (3)No shrinkage and craking after cured. (4)Better adhesion and harder. Construction guide: (1)Shake can vigorously for one minute before use. (2)Clean and pre-moisten surface before use. (3)Firmly screw can on adapter,and turn the flow adjustment screw anticlockwise. (4)Fill vertical joints from the bottom up whenhalf filled enough. (5)Foam begins to cureabout ten minutes,wait for one hour before doing the next step. (6)Use knife to smooth out cured foam and treat surface with cement paint or silicone. Usage scenario: Wide range of applications,including:mounting,sealing,filling and onsulating General purpose one-compoent polyurethane foam suitable for filling,insulating,sealing,mounting,caulking,stopping and soundproffing of large and small holes in cocrete,plaster,brick,floorboards,glass or wood.It is specially recommended for mounting of windows and doorframes,heat insulation of sewerage and central heating,fixing and isolating of wall panels and more ecification.
Product description One component polyurethane joint sealant is a durable elasticity moisture curing polyurethane polymer based road joint filling material. It is widely applied in filling road joints for the excellent properties and easy application Typical applications 1.Suitable for sealing and filling the expansion joints and settlement joints of airport runways, highways, building roofs, underground parking, storage yards, industrial floors, driveways, loading docks and basement. 2. Cracks maintenance for highways, plaza, roofs, bridges and epoxy floors etc. Key features 1.One component, easy to application, free solvent, non-toxic and odorless after curing, environment-friendly 2.Self-leveling, excellent flowability, easy to raked joint operation 3.Durable flexibility, no crack, excellent sealing and waterproofing properties 4. High movement, no cracking, no falling off, suitable for sealing jonts for all kind of concrete road 5. The new and used sealant have good compatibility, easy to repair 6.Excellent resistance to water, oil, acid, alkali and puncture Technical data table Property standard/unitsvalue Product item ----- pu820 , Appearancevisual inspectiongray, homogeneous paste , Density g/m3 1.35â±0.1 Flow ability mmself-leveling , Solid content %98 , Surface dry timehour â?¤4 , Tack free time hour 6~16 , Fully cured timehour 24
Single component polyurethane sealant, as known as a single component, hydrophilic, water activated, hydro active, expandable, gungrade waterstop, is also called single component polyurethane hydrophilic expansion waterproofing sealant. When in contact with water, the sealant expands and produces an expanding pressure. The pressure between the expanded sealant and the surrounding concrete structure prevents water penetration through the joint and provides a durable waterproofing solution. Advantages Based on the physical and chemical properties of the polyurethane sealant, it has many advantages. Such as: Expansion rate. The polyurethane sealant has a strong expansion capacity. It can expand to 220% or 300%, 400%, 500%, even 600% of its own volume. Strong adhesion. It can used to steel, HDPE, PVC, and other common building materials, and it also effective to damp surfaces. Good weather resistance. It has low temperature flexibility, and its service life of up to 15 to 20 years. Environmentally non-toxic. It has good chemical resistance, and it tested can be resistant to hydrochloric acid, salt water, sodium carbonate, potassium hydroxide and other chemicals. In addition, it is safe and non-toxic when in contact with drinking water, belongs to environmentally friendly products. Ease to use. It can be applied with a standard caulking gun. Application Polyurethane sealant is widely used in construction, transportation and other industries. Such as the following usage: Caulking agent. The polyurethane sealant is used as caulking agent in the construction of subways, tunnels, underground parkings and other projects. Sealing waterproof. In building construction, it can play a role of sealing waterproof for doors and windows, exterior walls and other parts. Water stop. It can be used as water stop when punctures are found in plumbing, sewer lines and other utility pipes.
Single component polyurethane water-swelling sealant is a kind of polyurethane type amorphous paste with one-component, solvent-free, water swelling. The amorphous paste ensure that it can be used to prevent infiltration in irregular base. It has double sealed water stop function. Single component polyurethane water-swelling sealant not only has elasticity water stop of rubber but also has volume expansion stop water after soaking. And it can be cured in humid environments. Curing time depends on the temperature and humidity of environments. Compared with waterstop, it can be used in various irregular seams, especially between different materials, wet, pile head and other parts. And it also can be used in vertical surface without sag. Water-swelling sealant can be divided into two kinds according to the swelling ratio: PJ220 and PJ400. It is the economic choice for customers. Specification Hardness: 65. Temperature range: -4080°C. Expansion rate: 220%. Package specification: 600 ml per unit. Package: Single component polyurethane water-swelling sealant is packed in foil papers. Each box has 20 single component polyurethane water-swelling sealants. Glue gun installation tips Single component polyurethane water-swelling sealant should used with glue gun. The right picture will show you how to install the single component polyurethane water-swelling sealant in glue gun. It is easy to learn and use. Feature Good seal and water stop effect. Good durability, excellent chemical stability. Flexibility, applied to various irregular base. Good adhesion, moist ground also can be bonded firmly. The rate of mass change is low. Construction is simple, easy to operate. Environmentally friendly products, safe and non-toxic. Economic price. Application Underground constructions.Tunnel.Protective engineering.Subway.Sewage treatment tank.Construction joints.Deformation seam.Wall seam.Pipe trench.Filling and sealing joint of door.Sealing joints of window.Expressway.Bridge.Airport runway.
Volume: 310ml Curing system: acetoxy- smooth paste- netral Densty: 0, 97 / 1, 20 +/- 0, 03g/ml Curring rate: 2, 0 mm/day Application temperature: +5/+40c This informations for generally for more information please visit our web site 100*120*150, 1 125kg
Product feather: (1)One component, good contact deformation, easy to construct (2)High strength. (3)Good compatibility and wide use. (4)Environmental friendly, pass SGS, ELV standard certification. (5)High elasticity and good adhesion. (6)Resistant to water, oil and aging. (7)No solvent, no shrinkage after curing. Using way Suitable for bonding and sealing among various materials such as metal, alloy, glass, wood, concrete, marble and ceramics. Can be applied to the construction industry, industry, transportation industry, home appliance industry, furniture industry and other industries. To do some adhesion test before a large number of use. If necessary, do roughening or adding primer before adhesion.
Butyl acrylate is an organic compound with the formula C4H9O2CCH=CH2. A colorless liquid, it is the butyl ester of acrylic acid. It is used commercially on a large scale as a precursor to polybutyl acrylate, which is used in paints, sealants, coatings, adhesives, fuel, textiles, plastics, and caulk.
Supplier: Polyurethane sealant, construction joint sealant, pu sealant for auto glass replacement, pu adhesives for floor, polyurethane waterproof coatings
Services: Producer and exporter
Buyer: Polyurethane sealant
Supplier: Waterproof materials like SBS/APP modified bitumen waterproof membrane, high polymer waterproof membrane (PVC/EPDM/TPO/EVA/HDPE waterproof membrane), self adhesive bitumen waterproof membrane, cross laminated HDPE bitumen waterproof membrane, polyurethane waterproof coating, polymer cement waterproof coating, asphalt shingle
Services: FOB, C&F, Distributor
