Plastic Auxiliary Machine Drying Loader Naming Principle ODL – xxx – xxx 1 2 3 1 Orste Drying Loader 2 Hopper Capacity (L) 3 Loader Model Product Features 1.Material-contact surface made of stainless steel to eliminate material contamination. 2.The closely casting aluminum shell ensures excellent insulation. 3.Hot air inlet elbow design can effectively avoid burning caused by dust piling up at the bottom of the pipe heaters. 4.The hopper design is convenient for cleaning and material change. 5.Accurate temperature controller guarantees easy control of temperature. 6.Overheat protection device makes machine run safely and reliably. 7.Dust-proof mute blower prevents dust from polluting material. 8.Material window in hopper and base makes it convenient to observe the material usage. Parameters / Specification Model,Applicable Dryer,Applicable Loader,Vacuum Hopper Receiver,Conveying Capacity (kg/hr),Hopper Capacity (L),Measurement (mm),Weight (kg) ODL-40,OHD-40,OAL-1.5S,OAL-1S,1 x OMH-7.5L,300,1*7.5,620*1000*640,95 ,,OAL-2S,1 x OPH-7.5L 1 x OMH-7.5L,450,2*7.5,, ODL-80,OHD-80,OAL-1.5S,OAL-1S,1 x OMH-7.5L,300,1*7.5,750*1000*640,110 ,,OAL-2S,1 x OPH-7.5L 1 x OMH-7.5L,450,2*7.5,, ODL-120,OHD-120,OAL-1.5S,OAL-1S,1 x OMH-7.5L,300,1*7.5,850*1000*640,115 ,,OAL-2S,1 x OPH-7.5L 1 x OMH-7.5L,450,2*7.5,, ODL-160,OHD-160,OAL-1.5S,OAL-1S,1 x OMH-7.5L,300,1*7.5,950*1080*710,155 ,,OAL-2S,1 x OPH-7.5L 1 x OMH-7.5L,450,2*7.5,, ODL-300,OHD-300,OAL-1S,1 x OMH-7.5L,300,1*7.5,2000*1080*710,160 ,,OAL-2S,1 x OPH-7.5L 1 x OMH-7.5L,450,2*7.5,, ODL-600,OHD-600,OAL-2S,1 x OMH-7.5L,400,12,3850*1140*840,210 ,,OAL-3S,1 x OPH-7.5L 1 x OMH-7.5L,700,2*12
Plastic Machine Desiccant Dehumidifying Dryer Naming Principle ODD-xxx/xxxH 1 2 3 1 Orste Dehumidifying Dryer 2 Hopper Capacity (L) 3 Dehumidifying Air Quantity (m3/hr), H: Honeycomb Features 1.The ODD dehumidifying dryers use honeycomb dehumidifiers with an elegant semi-integral appearance. 2.Combines the two functions of dehumidifying and drying into one machine, occupy little space which ensures the whole arrange of the workshop. 3.Insulated drying hopper features dry air down-blowing and cyclone exhaust design. This improves drying efficiency and reduces energy consumption while maintaining a steady drying effect. 4.Compact in size for ease of movement. 5.Microprocessor is standard equipment, ensures convenient operation. 6.All models are standard equipped with ORD-H Dehumidifier, OTD Dehumidifier is optional. FUNCTIONAL SCHEME The sealed honeycomb rotor is divided into dehumidifying, regenerative and cooling zones in the rotary dehumidifier. Damp and hot air from dry material hopper is blown into rotor after cooled. Moisture from the air is absorbed by rotor and is then absorbed by regeneration heating air. Two strands of airflow function on the rotor. And with the rotation of the rotor, moisture from the air is absorbed and expelled after absorbed regeneration air to form stable low dew-point air, which is dries to the drying temperature and then is blown into drying hopper to closed circle to dry material. PARAMETERS Model ODD-,Regen. Heater (kw),Regen. Blower (kw),Drying Heater (kw),Drying Blower (kw),Dry Air Volume (m3/hr),Insulated Hopper (L),Dimension H*W*D (mm) ,Weight (kg) 20/40H,4,0.2,4,0.12,40,20,1260*960*860,150 40/40H,4,0.2,4,0.12,40,40,1260*960*860,165 80/40H,4,0.2,4,0.12,40,80,1650*1060*860,190 120/80H,3,0.2,6,0.75,80,120,1780*1220*855,250 160/80H,3,0.2,6,0.75,80,160,1740*1220*855,255 160/120H,3,0.2,6,0.75,120,160,1740*1220*855,265 230/120H,3,0.2,6,0.75,120,230,2010*1220*855,295
Plastic Drying Machine Hopper Dryer Naming Principle OHD - xxx 1 2 1 Orste Hopper Dryer 2 Hopper Capacity (L) Product Features 1.OHD series adopt hot air diffuser to gain an even hot air flow to improve drying efficiency. 2.Material-contact surface made of stainless steel to eliminate material contamination. 3.The closely casting aluminum shell ensures excellent insulation. 4.Hot air inlet elbow design can effectively avoid burning caused by dust piling up at the bottom of the pipe heaters. 5.The hopper design is convenient for cleaning and material change. 6.Accurate temperature controller guarantees easy control of temperature. 7.Overheat protection device makes machine run safely and reliably. 8.Dust-proof mute blower prevents dust from polluting material. 9.Material window in hopper and base makes it convenient to observe the material usage. Parameters / Specification ModelCapacityHeating (kw)Blower (w)Measurement (mm)Installation (mm)PowerWeight (kg) Lkg OHD-2020122.090630*400*825110*1101?, 230VAC, 50/60Hz35 OHD-4040253.5135750*420*1030160*16040 OHD-8080504.5155850*500*1200160*1603?, 400VAC, 50/60Hz45 OHD-120120756.5155950*580*1300160*16055 OHD-1601601006.52151050*640*1360180*18070 OHD-240240150152151060*720*1560180*18085 OHD-300300200153201180*838*2020230*230100 OHD-480480300183201280*850*1750230*230130 OHD-600600400180.751480*1050*2020275*275165 OHD-800800500205501480*1050*2350275*275200 OHD-900900600201.11580*1158*2400280*280240
Compressed Air Dehumidifying Dryer Naming Principle OCD – xx/xxxA Orste “Three-in-one” Compact Dryer Hopper Capacity (kg) Dehumidifying Air Quantity (m3/hr) A: Compressed Air type Product Features 1.P.I.D temperature controller to accurately control regenerative temperature. 2.Adopt large flow blower which has a better dehumidifying effect than normal blowers. 3.Unique dual-tower molecular sieve design achieves good effect through dehumidifying of molecular sieve by principle of air pressure change, energy-saving and efficient. 4.Equipped with return air filter ensures no contamination to the molecular sieve. 5.Auto-adjust dry air quantity and temp. according to usage of material, prevent over-heating or thermal degradation of plastic resin. 6.Equipped with double-layer insulated stainless steel drying hopper, adopt down-blowing drying air pipe design, ensures even drying of materials. 7.Vacuum take-off valve (can be quickly detached) is equipped in feeding system to ensure no surplus raw material in hopper tubes. 8.Heat material conveying can be equipped with closed loop hot air conveying device to avoid contamination and moisture regain. 9.Optical hopper dryers are optional to suit production of optical product. 10.Transparent window design for filter makes it convenient to monitor the condition of filter. The cleaning or change of the filter can be done according to the actual need. 11.The clip style cover design ensures easy maintenance. 12.Dew point can be as low as -40oC. Application OCD-A compact dryers are mainly used to dry hygroscopic engineering plastics or regrind materials. Under ideal conditions, the dew-point of dehumidified dry air can be lower than -40oC. Parameters / Specification
PET Crystallizing Dryer NAMING PRINCIPLE OCR-xxx 1 2 1 Orste PET Crystallizer 2 Hopper Capacity (L) Features 1.Simplify and improve drying efficiency. 2.Fixed speed of agitator makes materials not lump together during the crystallization. 3.Materials can be dried under high temperature to improve drying efficiency. 4.Cyclone dust collector is standard equipped, which is applied to dust-rich place. Can effectively reduce the load on filter bag, and reduce the numbers of filter bag cleaning, thus extend the life span of the filter bag. 5.With double overheat protector, it can reduce the possibility of either mechanical or man-made problems. 6.Equipped with rotary valve with good sealing performance, which can output crystallized material accurately. 7.Equipped with material level switch, which can detect material level accurately and make operation reliable. 8.Equipped with negative pressure tester to immediately test the ventilation of the filter. Given an alarm when the negative pressure is higher than the setting value, clean the filter to avoid blockage. APPLICATION OCR closed-loop crystallizers are used for constant crystallization of un-crystallized PET regrinds or pellets. Processed materials can then be dried and dehumidified directly. This system mainly consists of heating elements, insulated hopper and agitator screw mixing device. After un-crystallized PET materials fed into the hopper, the system starts crystallization and agitator starts blending to prevent formation in lumps. Crystallized materials can be conveyed to material storage bin or into drying hopper. FUNCTIONAL SCHEME Once material filling starts, heat blower starts up and material heating begins. Control cabinet would stop sending signals to auto loader when material filling amount is higher than material level switch. Then material heating lasts for a while. When temperature sensing needle detects the value of reaching the set crystallized temperature, material would be conveyed out via feeding device; meanwhile, as material level in hopper lowers gradually, filling device starts to supply the uncrystallized material accordingly to realize the continuous crystallization process. When temperature sensing needle detects the temperature value of stopping material conveying, feeding device halts. If temperature rises again to reach the set crystallized temperature, feeding device will be activated to work so that the continuous crystallization process can be realized through this kind of circle.
Commodity: Calcium chloride Molecular formula CaCl2 H.S code 28272000 Product feature Calcium chloride is an inorganic salt, which exists as solid or liquid. Solid calcium chloride is a white, crystal substance in the form of flake, granule, pellet or powder. With different crystallized water contents, it can be dihydrate or anhydrous. Liquid calcium chloride is a colorless, clear solution. As calcium chloride has such properties as quick dissolving, exothermic ability, attracting moisture from the air and surroundings, dissolving at very low temperature, Specifications: Analysis Item Standard Calcium chloride (CaCl2) 74%min,77% min,94%min Total Chlorinated Alkali: (NaCl) 5.0%max Magnesium Chloride(MgCl2) 0.5%max Insoluble matter in water 0.25%max Calcium Sulfate (CaSO4): 0.2%max Ferric Oxide (Fe2O3) 0.025%max Heavy Metal as Cu., Pb., Cd., Cr., Hg., As 0.005%max Application Mainly used in drying, melting snow for airport express and street, concrete desiccant and concreting fast, removing dust and oil industry. Exporting Packing :Plastic woven bag with PE ,25kg/50kg/1000kgs net weight or 25kg x 40 bags into one big bag or 40 bags on a pallet with shrink-wrapped Means of transportation :in containers or by bulk vessel with large quantity
Product Name Citric acid monohydrate Product Charactersï White Crystalline Powders, Colorless Crystals or Granules Executive Standards BP/USP/FCC/E330/GB1886.235-2016 Packaging plastic woven bag, 25kg net composite paper-plastic bags or 3-ply kraft paper bags with PE liner, 500kg or 1000kg net PP woven Jumbo bags Storage Kept in a light-proof, well-closed, dry and cool place Main Usage Citric Acid is mainly used as acidulant, flavoring agent, preservative and antistaling agent in food and beverage industry.it is also used as antioxidant, plasticizer and detergent in chemical, cosmetics and cleaning industries.
Commodity: Dicalcium phosphate Feed Grade Use DCP is the feed preparation of raw materials, Animal right to supplement calcium needs. Coarse its products more applicable to the preparation hens, ducks feed, concentrate feed and premix. Product Nature Molecular Formula:CaHPO4·2H2O,Molecular weight:172.09,After drying with loose white powdery crystals or granules. Neutral products, the melting acid, water-soluble, hygroscopicity small, heated to 90 around gradually lose water of crystallization. Product Features The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 18% of the products, due to a small amount of MCP, and its biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity and its harmful impurities significantly below standards:HG26362000 Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction. Coarse particle DCP in the animals stay in the stomach longer and more conducive to the absorption of calcium phosphate, the product of Micro-particle DCP granulation from mechanical, without any chemical binder. Specifications Appearance white and gray powder/granule Total P 18% min Calcium 21% min F 0.18% max As 30 ppm max Pb 30 ppm max Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg/50KG/1000Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.
Product Features The purity of the product, calcium and phosphorus ratio appropriate to ensure a higher degree of its biological effects. Phosphorus content greater than 21% of the products, their biological effects better. This unique high-tech companies use technology to make our products crystallization, high purity. Drying process advanced products, products with low free water under the premise that the product does not lose crystallization of water, avoid the product in the drying process for the loss of water caused by crystallization of biological effects of the reduction. coarse particles MDCP in the animals stay in the stomach longer and more conducive to the absorption of calcium phosphate, the product produced by micro-particles MDCP form, without any chemical binder. Specifications Appearance white powder or granule Phosphate  21% min Calcium     15% min Fluorine    0.18% max Arsenic    30ppm max Pb   30ppm max Source of OriginRock Packing and Storage Knitted bags lined polyethylene plastic bags double packaging, Weighing 25Kg. Transportation-and harsh rain. Stored in a cool, ventilated, dry place.
