Corrugator belts Inwoven Aramid Edge is a consistent development based on the proven woven high speed corrugator belt range. Also is ideal for corrugating systems with high production speed, even load systems and frequently changing paper widths.
Corrugator belts Inwoven Aramid Edge -Features
Suitable as top belt with high speed (above 150 m/min) production
Heat and super tear resistance
Inwoven Aramid edge to reinforce the belts, reduce wear substantially and ensure a long lifetime.
Particularly for frequent changes of board width
Mostly used for all Corrugating Production Lines.
Corrugator belts Inwoven Aramid Edge is a consistent development based on the proven woven high speed corrugator belt range. Also is ideal for corrugating systems with high production speed, even load systems and frequently changing paper widths.
Corrugator belts Inwoven Aramid Edge -Features
Suitable as top belt with high speed (above 150 m/min) production
Heat and super tear resistance
Inwoven Aramid edge to reinforce the belts, reduce wear substantially and ensure a long lifetime.
Particularly for frequent changes of board width
Mostly used for all Corrugating Production Lines.
Corrugator belts Inwoven Aramid Edge- Specification
Product Corrugator Belt Inwoven Aramid Edge
Thickness 8mm-10mm
Width range 1000mm - 3200mm
Length 8Suitable position Top belt,Bottom� belt,Upper belt ,Lower belt
Corrugator Belt & Spare Parts
Corrugator belts Inwoven Aramid Edge is a consistent development based on the proven woven high speed corrugator belt range. Also is ideal for corrugating systems with high production speed, even load systems and frequently changing paper widths.
Corrugator belts Inwoven Aramid Edge -Features
Suitable as top belt with high speed (above 150 m/min) production
Heat and super tear resistance
Inwoven Aramid edge to reinforce the belts, reduce wear substantially and ensure a long lifetime.
Particularly for frequent changes of board width
Mostly used for all Corrugating Production Lines.
Corrugator belts Inwoven Aramid Edge- Specification
Product Corrugator Belt Inwoven Aramid Edge
Thickness 8mm-10mm
Width range 1000mm - 3200mm
Length 80 meters
Heat-resistance 240 (the kevlar edge upto 350)
Tensile strength 70Mpa
Coefficient of friction 0.40
Weight per unit (7.50.3)kg
Air-permeability 40mm water Column 2.0mmin
Seam Hot JAW lacing/Clipper with rubber coated
Edge 100mm or 200mm inwoven aramid edge reinforcement (kevlar)
Suitable position Top belt
Lifetime 50-70 million meter
Used on all corrugators high tearing resistance
Long life time running High abrasion resistance
Moisture absorption Heat resistance Low noise
Corrugator Belts with Silicone Coating Technical Parameters
Product High Speed Corrugator Belt
Thickness 9mm
Width range 1400mm - 3200mm
Length 80 meters
Heat-resistance 240C (the kevlar edge upto 350C)
Tensile strength 70Mpa
Coefficient of friction 0.40
Weight per unit (7.5 0.3)kg/m2
Air-permeability 40mm water Column 2.0m m2/min
Seam Hot JAW lacing/Clipper with rubber coated
Edge 100mm -400mm inwoven aramid edge reinforcement (kevlar)
Corrugator belt is used to produce all kinds of corrugated board.
It is made of the high grade PET continuous filament yarn with high tension and low flexibility.
Our special structure design ensure the hydrophilic and drying ability
High moisture absorption and release; Low noise and high speed
Woven structure, anti-skidding
Introduction
The corrugator belt also named the Corrugated board conveyor belt.
Corrugator belt is for corrugated board production line and developed specifically for Double Facer. Corrugator belts consistently keep the fastest absorption & release of moisture, which secures high-quality cardboards with less consumption of heat and energy, and higher speed is assured. Corrugator belt have been specially developed for the transport of board and optimization of the drying process,they resist the stress continuously and achieve as long a life as possible.
Type
Normal High-speed corrugator belt & High-speed corrugator belt with Kevlar edge
YK-K --- Reinforced Edges Kevlar armored on both edges
Corrugator belts Inwoven Aramid Edge is a consistent development based on the proven woven high speed corrugator belt range. Also is ideal for corrugating systems with high production speed, even load systems and frequently changing paper widths.
Corrugator belts Inwoven Aramid Edge -Features
Suitable as top belt with high speed (above 150 m/min) production
Heat and super tear resistance
Inwoven Aramid edge to reinforce the belts, reduce wear substantially and ensure a long lifetime.
Particularly for frequent changes of board width
Mostly used for all Corrugating Production Lines.
Corrugator belts Inwoven Aramid Edge- Specification
Product Corrugator Belt Inwoven Aramid Edge
Thickness 8mm-10mm
Width range 1000mm - 3200mm
Length 80 meters
Heat-resistance 240 (the kevlar edge upto 350)
Tensile strength 70Mpa
Coefficient of friction 0.40µ
Weight per unit (7.5±0.3)kg/
Air-permeability 40mm water Column 2.0m min
Seam Hot JAW lacing/Clipper with rubber coated
Edge 100mm or 200mm inwoven aramid edge reinforcement (kevlar)
Suitable position Top belt
Lifetime 50-70 million meter
Used on all corrugators high tearing resistance
Long life time running High abrasion resistance
Moisture absorption Heat resistance Low noise
Corrugator Belts with Silicone Coating Technical Parameters
Product High Speed Corrugator Belt
Thickness 9mm
Width range 1400mm - 3200mm
Length 80 meters
Heat-resistance 240�ºC (the kevlar edge upto 350�ºC)
Tensile strength 70Mpa
Coefficient of friction 0.40µ
Weight per unit (7.5±0.3)kg/m2
Air-permeability 40mm water Column 2.0m³/m2/min
Seam Hot JAW lacing/Clipper with rubber coated
Edge 100mm -400mm inwoven aramid edge reinforcement (kevlar)
Suitable position Top belt,Bottom belt,Upper belt ,Lower belt
Needle corrugator belt is producted by professional needle machine with advanced technic. According to the requirement of corrugated paper board production line, the corrugator belt is made of high grade pet fiber & nomex fiber to meet the high temperature and high stength and each belt must be heat-setting and chemical treatment to guarantees the stabily size.
Property :
High temperature resistance
Aging resistance
Even surface
Stable size
Long life time
Nowoven corrugating belt with teflon gives the belt better resistance to tension. It is a modern belt for high speed machines of a new generation. Its high permeability enhances the atness and quality of board. Its reinforced pattern allows a very good life on machine. The lf (low friction) nishing was developed for shoe press applications and lower energy consumption.
Nowoven corrugating belt with teflon features
1.High temperature resistance
2.Aging resistance
3.Even surface
4.Stable size
5.Long life time
High speed corrugation beltis made of the high grade pet continuous filament yarn with high tension and low flexibility.Our specifical structure design ensure the hydrophilic and drying ability.High speed corrugation belt are special use in the heating and tracking section all kinds famous corrugators.
Include bhs / agnati / mhi / mit / marouip / tcy / isowa and more china corrugator machine.
Normal edge corrugator belt
Normal edge corrugator belt made of the high grade pet continuous filament yarn with high tension and low flexibility.Our specifical structure design ensure the hydrophilic and drying ability.
Features
Suitable for averange liner machine speed
Longlife time running
Suitable as a top and bottom belt
Specifications:
Material: synthetic
aterial
Thickness:9 mm
Wdith range:1000mm - 3200mm
Heatresistance:220
Weight:7.5kg/
Suitable speed:250m/min
Seam:hot jaw lacing with flocking fastener clipper withrubber
Widely used for heavy board and double wall
