"ISO" in the context of polyisocyanurate insulation typically refers to the insulation material's type or category rather than an acronym. Polyisocyanurate is a type of rigid foam insulation known for its high thermal resistance (R-value) and effectiveness in providing thermal insulation.
XPS Insulation (Extruded Polystyrene): "XPS" commonly refers to extruded polystyrene insulation. This type of insulation is known for its closed-cell structure, providing good thermal resistance and moisture resistance. It is often used in various construction applications, such as insulating walls, roofs, and foundations.
B1 Fire Rating: The "B1" component might refer to a fire rating. In some fire classification systems, materials are rated based on their fire resistance, and "B1" could indicate a certain level of fire resistance. For example, in the European fire classification system (Euroclass), B1 represents a material with limited combustibility.
Fiberglass core material vacuum insulation board (VIP) is a type of vacuum insulation material, which is composed of glass fiber core material and vacuum protection surface layer. The operating temperature range is -100 to 80. It features low heat conduction. The aluminum foil film and core material can effectively block heat radiation. The internal vacuum effectively prevents heat transfer caused by air convection, thus significantly reducing the thermal conductivity. For refrigerated products, it is less than 0.0013W/m.K and does not contain any ODS (Ozone-depletion)
High-Quality SIP Panels for Energy-Efficient Construction Manufacturer from Republic of Moldova
We produce and supply Structural Insulated Panels (SIP) for fast, eco-friendly, and cost-efficient house construction. Available for wholesale and export across Europe.
We are a Moldovan manufacturer of SIP (Structural Insulated Panels) designed for energy-efficient buildings. Our panels consist of OSB-3 sheathing and high-density EPS (Expanded Polystyrene) insulation core.
Suitable for walls, floors, and roofs, our SIP panels help reduce construction time and labor costs while improving energy performance.
Specifications:
- Panel size: customizable (standard 2.8m/2.5m x 1.25m)
- Thickness: 124mm, 144mm, 174mm, 224mm.
- OSB: moisture-resistant OSB-3 (certified)
- Insulation: EPS, fire-resistant grade available
- Load-bearing capacity: tested and certified
- Assembly: fast and simple ideal for prefabricated buildings
Advantages:
- Energy savings up to 60%
- Reduced construction time by up to 70%
- Strong thermal and acoustic insulation
- Eco-friendly and recyclable materials
- Competitive pricing for wholesale orders
Minimum Order: 50 pieces
Export options: DDP / EXW / CIF available
Production capacity: 100 panels/daily
Contact us today for a quote or technical catalog. We speak English, Romanian, and Russian.
Polyester fiber sound-absorbing decorative panels with sound absorption, noise reduction, noise reduction, thermal insulation, thermal insulation, thermal insulation and other effects, the material is symmetrical and reliable, is a wide band of high-efficiency sound-absorbing materials. So how do you install a polyester sound-absorbing panel
When installing the polyester fiber-absorbent panel wall with reserved back cavity, you can use straight clip type light steel keel to do the back attachment keel. In a good solid wall attached to the wall keel, the polyester fiber board with glue, or nail the method of connecting with the light steel keel. It has good flatness and stability.
Directly affixed to the solid wall is as follows.
1. Pay attention to plate selection and plate-layout before construction.
Pay attention to slight color difference, find out the center point of the paste surface, draw cross line, adopt the way of bricklaying, and start to line up the board from the center point (it is best to wear gloves to avoid pollution).
2.Cut the board surface
Use steel ruler and sharp knife to cut or decorate accordingly, if you want to reduce the seam, you can tilt the blade inward by 0.5 1mm when cutting to facilitate the board edge butt, and reduce the gap.
3.Paste
(1) Cement or wood base surface: can choose non-benzene universal glue or white latex made of neoprene rubber.
(2) Base surface of paper gypsum board: under the premise that it is not easy to be damp, you can choose white emulsion glue or wallpaper glue made of cellulose as raw material (should be fixed with nails immediately after gluing to avoid the glue is not dry and the board surface moves).
(3) Under the premise of easy or possible moisture, you can use universal glue.
Polyester fiber sound-absorbing panels are porous sound-absorbing materials, it is easy to absorb glue, blocking holes, affecting the cavity after the sound-absorbing function. It is recommended that when constructing, you can brush glue on one side (only brush glue on the base plate or keel, the amount of brush glue is slightly heavier than normal). At the same time, you can also match the grain nail reinforcement.
V-groove wall panels are CNC machine-cut to create 45 90 grooves in the surface of the PET acoustic panels. The paper size can be customized. It is widely used as a wall panel in wall spaces. Our Poly acoustic panels are made from recycled PET, which is also fully recyclable for complete acoustic panels, and we can cut CNC cut and UV printed panels on the surface that are lightweight, fire resistant, impact resistant, tacky, easy to install, and most importantly have high acoustic performance.
Copper Composite Panel combines the natural beauty of cooper with the advantage of composite panel, making it a new innovative material for architects.
Advantage of opper Composite Panel:
1) As time goes on the Copper skin will be oxidized and form a beautiful patina on the surface, giving the building a special and eye-catching classic look.
2) The flatness of Copper Composite Panel is better than ordinary Aluminum Composite Panel, making it also an idea wall cladding material.
3) Cost-Effective: Comparing to solid Copper Panel, the cost for Copper Composite Panel is about 60% lower.
Specification:
Total Thickness: 4mm
Copper Thickness: 0.5mm
Width: 1000mm
Length: Any up to 6000mm
Copper Composite Panel
Total Thickness 4mm
Copper Thickness 0.5mm
Width 1000mm
Length Any up to 6000mm
