Description With, high, hardness, , not, easy, to, be, broken, , suitable, for, the, production, of, many, crystal, crafts, production , Application Suitable, for, production, of, crystal, lamp, , candle, holder, , crystal, crafts, , crystal, gifts, , crystal, trophy, crystal, vase, , , crystal, model, building, mode, , crystal, perfume, bottles, , crystal, ashtray, , crystal, vase, , hotel, supplies, , crystal, stationery, cards, taiwan, , crystal, ball, , crystal, key, button, , crystal, animal, , flower, and, so, on, transparent, products. Characteristics *not, easy, to, be, broken *high, hardness Shelf, life , under, the, temperature, of, 25¡æ, storage, for, a, period, of, three, to, six, months , , Need, any, help, on unsaturated resin, , please, feel, free, to, contact kelly: , Mob:18938867547 Email: hyg(at)resinpu(dot)com Skype:kellyhzhang0222 Resin, :, , 220kg/iron, drum, package, , Thixotropic, :, 25kgs, per, plastic, , drum Cure, agent, :, 25kgs, per, plastic, , drum
Ja202# polyurethane resin operation instructions 1, operated under the conditions of ventilation environment. 2, prepare the tools , and make sure it is clean , dry . Un-oil , and not contact with any chemical solvent 3, weigh part a and part b exactly ( multi-component part a will leads to the bottom of the bubble, multi-component b may cause surface sticky). 4 carefully stir in the same direction to avoid a large number of bubbles, you need patience and stir until completely transparent. 5, vacuum pumping : vacuum pumping by vacuum machine Ja202# polyurethane resin warm tips : 1 the humidity should less than 60% if using by hand , you would better to use a dehumidifier 2 you would better to use metal or plastic tools instead of wooden articles . 3 you should make sure your products is very dry , and can not use inks containing glycerol. 4 this product (especially b glue) can¡¡¥t contact with skin , otherwise please wash with plenty of water and soap 5 resin will be cured with high temperature and cured very fast 6 far away from children to prevent eating. Ja202# polyurethane resin package 2kg/set or 10kg/set packing Ja202# polyurethane resin shelf life Six (6) months when stored under dry and cool place by original package under 25¡æ 2kg/set or 10kg/set packing
Bmz020#non-alkali glass fiber surface mat description Glass fiber surface mat is mainly used in the surface layer of glass products. Divided into two categories: specific wound type series (s-sm)and hand lay-type series (s-hm) Bmz020#non-alkali glass fiber surface mat characteristic Fiber distribution evenly, finished products with smooth surface, corrosion resistance, low binder content, volt mode is good Bmz020#non-alkali glass fiber surface mat application Wound glass fiber mat is mainly applied to the surface of the pipe and tank wrap products, it can improve product surface corrosion resistance and enhanced compressive strength, anti-leakage and prolong life. Hand lay glass surface mat is mainly used for hand lay products with complex geometric curve, its volt mode is good, resin penetration speed, can improve the strength and corrosion products. Bmz020#non-alkali glass fiber surface mat datasheet Product name Alkaline or not Gram weight (g/m2) Breadth¡ê¡§mm) Bmz020# Not alkali 20 20-2000 Bmz020#non-alkali glass fiber surface mat shelf life 12-24 months under the room temperature of 25c Selling units: Single item Single package size: 1x1x1 cm Single gross weight: 1.2 kg
Supplier: Composite material like resin, PU, epoxy resin, polyurethane resin, unsaturated resin, glass fiber cloth, glass fiber yarn, glass fiber mat, silicone rubber
DATA SHEET FOR EPOXY EPOXY COATING :- INTRODUCTION - EPOXY COATING (HYB) is a two part high solids solvent free epoxy phenolic resin based coating system designed for hard wearing, smooth surface finish for floors, walls and on steel structures. Nonskid surface finish can be achieved on floor, if required. FEATURES: 1) Hard Wearing 2) Non Dusting 3) Excellent Surface Finish 4) Non Smelling 5) Good Aesthetics 6) Highly Chemical Resistant APPLICATION: 1.Stir well before mixing Part A and Part B and mix in the prescribed ratio. 2.Apply one coat of EPOXY primer on the clean and dry surface. 3.EPOXY COATING (HYB) should be applied on the surface by brush or roller within 24 hrs. After application of primer coat it should be allowed to air dry for min. 4 hrs. Preferable in a dust free atmosphere. 4.Apply min. 2 coats with the intercoat interval of 6-8 hrs. PRODUCT SPECIFICATIONS: Application - Brush, Roller Mixing Ratio - As Directed on Packing Port Life - 30 Mins. Drying Time - Touch Dry- 30 Min, Hard Dry 6 Hrs. - Intercoat Interval 6-8 Hrs. Min. - Dry Film Thickness 125-150 Microns/per coat - depending on porosity Covering Capacity - 6-8 sq.met/kg per coat depending on porosity, roughness & method of application. Color Shades - All Standard Shades RECOMMENDED USES: 1) Food & Pharmaceutical 2) Work Shop 3) Clean Room Application 4) Chemical Resistant Coating for Concrete& Steel 5) Petrochemical, Fertilizer plants METHOD OF APPLICATION: SURFACE PREPARATION The long-term durability of the applied Epoxy coating (HYB) epoxy coating is dependent on the adhesion between sub-base and coating material. It is most important therefore, that the substrate surfaces are correctly prepared prior to application. 1.Before application of the Epoxy coating (HYB) surface should be free from loose partials, rust, oils, grease or earlier coatings and should be totally dry. 2.New concrete or cementations surface should be placed at least 28 days and have a moisture content of less than 5% before application of Epoxy coating (HYB) 3.After surface is dry, all repair work like sealing of joints, cracks filling of cavities and crevices should be carried out. HEALTH & SAFETY - Keep the containers tightly closed when not in use. Avoid contact with skin & eyes. It comes in contact with the body, wash affected parts with plenty of water and contact a doctor. Other known sector for Epoxy floor lining, Epoxy garage floor lining, Concrete epoxy lining, Concrete floor epoxy lining, Epoxy pipe lining, Marine epoxy lining, Sub marine epoxy lining, Basement lining epoxy floor shield, Louisiana, Oregon, Chip lining color epoxy floor, Aviation lining epoxy interior.
WE ARE SUPPLYING FROM INDIA AND FAR EAST
We are supplier and exporter of Ferro Silicon. Ferro silicon Specs: Si:75%min. and Si:72%min. C:0.2%max. S:0.02%max. P:0.04%max. Al:2.0%max.1.5%max.and 1.0%max .Commodity: Ferro Silicon Low Al Specs: Si:75%min. C:0.2%max. S:0.02%max. P:0.04%max.Al:0.1%max.0.3%max.and0.5%max. In 1mt plastic woven bags. Ferro Silicon Ferro Silicon has a melting point of 1200�?�°C to 1250�?�°C with a boiling point of 2355�?�°C and Ferro Silicon contains about 2% of calcium and alluminium. Ferro Silicon, as an additive to the production process of ferrous metals, will impart several desirable properties upon the resultant alloy. Some of the primary benefits of adding Ferro Silicon to an alloy is to improve the corrosion resistant properties of the new compound, as well as to add to the high temperature heat- resistance properties of the new alloy, for example, in the production of silicon steel for use in transformer cores.
We are a leading supplier of electroplating chemicals, industrial polishing and welding consumables, water treatment, powder coating, fertilizers. We stock and carry an extensive range of ready to use chemicals. We deal with so many different chemicals and we would like you to contact us for more information about our different chemicals and products.