I. Series zyd double-stage vacuum transformer oil purifier machine is mainly used for purifying the insulating oil, transformer oil, mutual oil, switch oil, dielectric oil and so on. Specially, it works with the regeneration system, can decolor for the badly waste transformer oil with a high efficiency. V. It can vacuum filling oil to transformer, vacuum dry transformer and on-line operation transformer . Vi. The standard zyd system is designed for processing oils in workshops, in storage tanks or directly in transformers (energized or de-energized transformers). Vii. The oil technical data after series zyd oil purifier machine treatment: 1. Gas content less than 0.1% 2. Impurity size less than 1m without free carbon 3. Oil dielectric strength (breakdown voltage) more than 75kv 4. Acidity value less than 0.01 mgkoh/g 5. Dielectric loss factors at 90c less than 0.001 500kg, 1200*1000*1300(mm)
TECHNICAL SPECIFICATION DATA SHEET: PROPERTY TEST ASTM TEST METHOD API @ 60 F 30- 45 ASTM D-1298 Sulfur (wt%) max 0.8 ASTM D-4294 BS &W % max 2.0 Paraffins (vol. %) 40 -70 ASTM D-2789M Naphthenes (vol. %) > 25 ASTM D-2789M Organic Chloride(ppm) < 1.0 ASTM D-4929 Organic Nitrogen max (ppm) 500 ASTM D-4629 Microcarbon Residue (MCRT) 2.0 Max ASTM D-4530 Light ends C2 iC5 5 % Max Total Acid Number, mg KOH 0.8 ASTM D-664 Metals by ICP ASTM D-5708 Vanadium
Base Oil Or Virgin Oil The purity of base oils means that your additive packages can be optimized to meet performance objectives at lower treat rates and reduced cost. Your formulators won’t have to worry about compensating for the quality of the base stock in your finished products. You have more freedom in new product development. Base oils can improve the performance of your finished engine oils and other lubricants.
Technical Data Sheet Property Average Value Gravity@15.6oc : 0.859 Max SPI: 33.45 Sulphur: 1.2-1.5 Max Water & Sediment Content: 0.2 Max Water Content: 0.1 Max Salt Content: 8 Max Carbon Residue: 4 Max Reid Vapour Pressure: 0 Pour Point: 0.35 Ash: 0 Asphalt : 1 Max ASTM Stabilized Gravity: Degree 3.7 Recovery @50oc: 0.8 Min @100oc: 8 @200oc: 28 @250oc: 37 @300oc: 47 Total Distillate: 47 Total Residue: 2.5Max
Industrial Oil Arsec Industrial Oil is ultra high performance lubricant for a vast array of uses, including long-service-life applications, high- and low-temperature applications, applications with the possibility of incidental food contact, and outdoor applications in marine environments and other areas where environmental concerns require the use of a very low-toxicity lubricant. Industrial oils are available in a wide range of ISO grades, with viscosities to meet any application requirement.
MOQ: 10,000 Barrels per Month Supply Ability: 1,000,000 Barrels per Month JP54 Technical Specifications: ADDITIVES Antioxidant in hydro processed fuel mg/l min 17 max 24 Antioxidant non hydro processed fuel mg/l max 24 Static dissipater first doping ASA- 3 mg/l max 1 Stadis 450 mg/l max 3 COMBUSTION PROPERTIES Specific energy, net mi/kg min 18.4 D 4808 Smoke point mm min 19 D 1322 Lumininomitter number min 45 D 1740 Naphtales % vol max 3 D 1840 Propriety unit min max result test ip method ASTM COMPOSITION Total acidity mg KOH /g max 0.01 354 D 3242 Aromatic % vol max 22.0 158 D 1318 Sulphur, total % mass max 0.30 107 D 1266/2622 Sulphur mercaptan % mass max 0.003 342 D 3227 Doctor test 30 D 4952 VOLATILITY Initial boiling point centigrade max report 123 D 96 10% vol at C 240 20% vol at C report 50% vol at C report 80% vol at C report End point centigrade max 42 170/303 D 56 / 3828 Density at 15 C kg m2 min /max 776/840 180/385 D 1298 LOW TEMPERATURES PROPERTIES freezing point centigrade max 40 15 D 1298 Corrosion copper (2hrs at 100 C) Corrosion silver (4 hrs at 500C) max 1 227 STABILITY Thermal stability control temp. 280C 323 Filter pressure, differential mm. Hg max 25 Tube deposit rating (visual) max