1 raw materials and coke are filled automatically to the top of the cupola entrance. 2 these objects melt and flow out from the bottom of the cupola into the vortex spinning machine. 3 together with a small amount of adhesive and oil, the melt subject generates the filamentous fibers in the vortex spinning machine. 4 filamentous fibers were spun into cotton which conveyed through the rollers. 5 after structure and density adjusted, they enter the curing oven. 6 products out from the curing oven are cutted by the sawing machine. 7 packaging or special handling. Environment friendly: Waste gas produced by the blast furnaces, spinning machine and curing chamber will pass through the filters to filter. After burning treatment, it was discharged through the chimney. The waste during the production process will be recycled. Products specification: Products Density(kg/m3) Size Length(mm) Width(mm) Thickness(mm) Panel 40-200 1000(adjustable) 500-2000 30-150 Felt 40-100 1000(adjustable) 1200 30-100 Stitching felt 40-90 1000(adjustable) 1000-1200 40-100 In wooden case, plastic paper or wrapped with film, etc.
As a professional manufacturer of polystyrene machine in China, our company can supply our clients the European Standard machines. Clients' satisfaction is our first priority. Product introduction: 1 With reasonable structure, the machine is easy to operate with completed functions. 2 The plate is formed through such processes as feeding, profiling , dispensing, heating, trimming, gouging and cutting. 3 The machine adopts precise low-speed metering pump, frequency control (or stepless speed variation) with computer control and dose is accurate. 4 It can produce flat plate and corrugated sheet of many specifications and models, including the sandwich panel with thickness of 40-300mm and width of 950-1200mm, and corrugated high-intensive composite board with thickness of 40-300mm and width of 950-980mm. 5 This machine applies to color steel plate, aluminum plate, stainless steel plate and so on. Technical parameters: Item Specification Raw material Normally 0.2-0.6 aluminum or color steel Speed 3-6m/min (Depend on the working temperature) Cutting type Trace flying saw cutting Drive Chain drive Electric control system PLC frequency conversion control Core material EPS board or rock wool Total power 35kw Power supply 380V/50HZ Or Customized Annual Output 600 thousand square meters Product width 950-1200 mm (Flat Plate) 950-980 mm (Corrugated Composite Board) Product thickness 40-300mm Equipment overall dimension (mm) 24000*2100*2600 / 29500*2100*2600 Laser cutting and hole drilling processing ensures the precise standard of the spare parts. The rough and the further processing guarantee the high quality of the spare parts. The heating treatment bring the chain plate a high strength, non-deformation and high resistance to the expansive force from high-density products. Painting makes the machine be waterproof and antioxidation. All of these ensures a longer term service than ordinary machine. The sandwich can be EPS or rock wool. While the plate can be color steel plate, aluminum plate, stainless steel plate and so on. In wooden case, plastic paper or wrapped with film, etc.
Specification of eps pre-expqanding machine: Item Unit\model Psf140ii(first, second foaming) Psf140 i (first, second foaming) Psf120 (first foaming) Barrel diameter Mm 1400 1400 1200 Volume M3 2.8 3.1 1.8 Steam pressure Mpa 0.4-0.6 0.6-0.8 0.6-0.8 Compressed air pressure Mpa 0.6-0.8 0.6-0.8 0.6-0.8 Foaming density Kg/m3 4.5-30 4.5-40 8-40 Production capacity Kg/h 500-600 400-800 15-450 Installed power Kw 21.9 20.45 17.4 External dimensions Mm 3450*2100*4500 4500*2150*2950 3000*1260*3650 Installed weight Kg 2950 2500 1750 Specification of eps shape molding machine: Item Unit \ model Psz120 Psz140 Psz175 Psz2000 Mould size Mm 1200x1000 1400x1200 1750x1450 2000x1600 Finished products size Mm 1000x800x330 1200x1000x330 1550x1200x330 1800x1400x330 Mould opening distance Mm 1400 1620 1620 1620 Steam consumption Kg/cycle 7 9 10 11 Steam pressure Mpa 0.6-0.8 0.6-0.8 0.6-0.8 0.6-0.8 Cooling air consumption Kg/cycle 45-138 50-150 60-190 65-200 Compressed air consumption M3/ cycle 1.5 1.8 2 2.2 Compressed air pressure Mpa 0.6-0.8 0.6-0.8 0.6-0.8 0.6-0.8 Vacuum pump air suction amount M3/h 165 230 280 280 Production cycle Sec 60-150 60-150 60-150 60-150 Installed power Kw 9.1 12.1 14.1 14.1 External dimension Mm 4600x1850x3300 5000x2050x3700 5000x2400x4000 5000x2650x4150 Installed weight Kg 3200 4300 4850 5300 In wooden case, plastic paper or wrapped with film.
The Production Line Concludes: Nc Cutting Machine, H Beam Assembly Machine, H Steel Gantry Automatic Welding Machine Or Dual Cantilever Automatic Welding Machine, H Beam Flange Straightening Machine, H Beam Shot Blasting Machine Equipment. Production For Standalone Operation, The Workpiece Transporter Rely Crane Lifting, The Entire Line Is Relatively Flexible, You Can Add A Different Segment Of The Process Equipment To Improve Production Efficiency. H Steel Assembling Machine Specifications: Dimension Of Web PlateHeight200-1200mm Thickness6-32mm Length4000-15000mm Dimension Of Wing PlateWidth200-600mm Thickness6-40mm Length4000-15000mm Assembling Speed500-1200mm Installed Power7.5kw, Exclusive Of Welding Power Supply Transmission Speed0.5-6.0 M/min H Steel Door Type Submerged Arc Welding Specification: Dimension Of Applied H SteelWidth200~800mm Height200~1200mm Length2000~12000mm Diameter Of Applied Welding Wire3.2~5mm Positioning Speed3000mm/min Welding Speed250~750mm/min Gauge4000mm H Steel Flange Leveling Machine Specification: Width Of FlangeThickness Of FlangeMin. Height Of FormerLeveling SpeedPower Supply 200-800mm6-40mm200mm9000mm/minAc380v50hz In Wooden Case, Plastic Paper Or Wrapped With Film.
Eps pre-expander specifications: ItemUnit\model Psf140ii(first, second foaming)Psf140 i (first, second foaming)Psf120 (first foaming) Barrel diameterMm 140014001200 VolumeM3 2.83.11.8 Steam pressureMpa 0.4-0.60.6-0.80.6-0.8 Compressed air pressure Mpa 0.6-0.80.6-0.80.6-0.8 Foaming densityKg/m3 4.5-304.5-408-40 Production capacityKg/h 500-600400-80015-450 Installed powerKw 21.920.4517.4 External dimensionsMm 3450*2100*45004500*2150*29503000*1260*3650 Installed weightKg 295025001750 Eps block machine specifications: ItemUnit\modelPsb-q200Psb-q300Psb-q600Psb-q800 Net internal size of mould chamberMm2040x1020x5303060x1250x6306100x1240x6308120x1240x630 Volume of mould chamberM31.102.414.776.34 Product density/specific weightKg/ m34.5-304.5-304.5-304.5-30 Production efficiency( standard condition)Piece/h4-84-94-96-9 Steam pressureMpa0.6-0.80.6-0.80.6-0.80.6-0.8 Compressed air inlet diameterMm65656565 Steam inlet diameterMm1001000150150 Power supplyV380380380380 PowerKw79.51515 Max. External dimensionMm3600x2000x27504500x2150x29507500x2150x29509500x2150x2950 Installed weightKg30004500950010500 Eps cutting machine specification: ItemUnitPsq300Psq600Psq800Multi-functional cutting machine Max. Size of productiveMm3000x1250x12506000x1250x12508000x1250x12506000x1250x1250 Transformer capacityKva5.25.25.215 Total power of installed machineKw6.556.556.5517.45 Max. External dimensionsMm5800x1900x24808800x1900x248010800x1900x24808800x1900x2400 Installed weightKg1200180022002800 In wooden case, plastic paper or wrapped with film, etc.
UPPER: NATURAL CALF LEATHER The Upper is made of natural calf leather; it is strengthened by a shock absorber interval layer made of silver ions (Ag+) impregnated High Density (HD) memory foam. Elastic Leather and Stretch fabric materials are used in some models to give the therapeutic feature to the shoes. LINING: Ag+ IMPREGNATED CALF LEATHER Silver ions (Ag+) impregnated calf leather has thermo-regulatory characteristics. Silver ions (Ag+) prevent microbial and fungal activity, decrease the risk of infections and bad smells. Seamless interior prohibits opening new wounds or suffering existing wounds. INSOLE: Ag+ IMPREGNATED MEMORY FOAM Made of silver ions (Ag+) impregnated Memory Foam covered by silver ionized natural calf leather take shape of your feet. All insoles have a removable part for heel spur to provide a hole for pressure relief. OUTSOLE: SUSPENSION FEATURE The suspension feature of the non-slip outsole balances the pressure applied to the sole to cure and relieve foot ache. The outer sole also has a structural feature that interferes with the natural movement of the foot. It imitates the barefoot walking movement made in nature. GENDER: Women SIZE ASSORTMENT: 34 - 42 COLORS: Black - Brown - Navy Blue - Burgundy - Beige PRIVATE LABEL: Available subject to negotiation
UPPER: NATURAL CALF LEATHER The Upper is made of natural calf leather; it is strengthened by a shock absorber interval layer made of silver ions (Ag+) impregnated High Density (HD) memory foam. Elastic Leather and Stretch fabric materials are used in some models to give the therapeutic feature to the shoes. LINING: Ag+ IMPREGNATED CALF LEATHER Silver ions (Ag+) impregnated calf leather has thermo-regulatory characteristics. Silver ions (Ag+) prevent microbial and fungal activity, decrease the risk of infections and bad smells. Seamless interior prohibits opening new wounds or suffering existing wounds. INSOLE: Ag+ IMPREGNATED MEMORY FOAM Made of silver ions (Ag+) impregnated Memory Foam covered by silver ionized natural calf leather take shape of your feet. All insoles have a removable part for heel spur to provide a hole for pressure relief. OUTSOLE: SUSPENSION FEATURE The suspension feature of the non-slip outsole balances the pressure applied to the sole to cure and relieve foot ache. The outer sole also has a structural feature that interferes with the natural movement of the foot. It imitates the barefoot walking movement made in nature. GENDER: Women SIZE ASSORTMENT: 34 - 42 COLORS: Black - Brown - Tan PRIVATE LABEL: Available subject to negotiation
