These air oil pump are renowned for their high efficiency as well as their extremely low noise levels.
Outstanding reliability due to high quality materials, seals and special change-over valve
The air oil pump cover the whole range of required pressures and may be adapted to customised products such as various containers, hose lines etc.
Technical parameters:
Compression ratio5:1
Air pressure.3.8 mpa
Max. Air consumption240l/min
Delivery18l/min
Length suction tube940mm/ 730mm/ 270mm
Air inlet connectionbsf 1/4"
Fluid outlet thread sizebsf 1/2 in
Suction tube diameter:42 mm
13%-15%
Penetration Worked 60
GB/T 269
240-250
Dropping point min
GB/T 4929
135-140
Copper Corrosion
GB/T 7326
pass
Base Fluid Properties
Base Fluid Type
Mineral
Viscosity @40 cst
GB/T 265
185
Viscosity @100 cst
GB/T 265
12
Pour Point
-20
Propertie
Great in anti-water;
Better mechanical invariability;
Better anti-rust;
Good oxidation stability;
Can take place of calcium base and sodium base greases.
This product is made of refined base oil, thickened by fatty acid metallic soap thickener, added with many kinds of additives, for instance, abrasion and extreme pressure resisting, anti-corrosive, antioxidant and rustproof etc.
Carbon powder is a fine, black or grayish powder made primarily of carbon (C) particles. It can be produced from various carbon-rich sources such as coal, petroleum, wood, or natural gas, and is often categorized based on its origin and purity. The physical and chemical properties of carbon powderâ??like high surface area, conductivity, and chemical stabilityâ??make it useful across multiple industries.
Composition:
Primary Element: Carbon (C)
Forms of Carbon Powder:
Activated Carbon: Highly porous, used for filtration and adsorption
Carbon Black: Fine black powder made from incomplete combustion of heavy petroleum products
Graphite Powder: Crystalline form of carbon with high electrical conductivity
Amorphous Carbon: Irregular, non-crystalline form of carbon
Charcoal Powder: Derived from wood or organic matter
Uses of Carbon Powder:
Filtration and Purification.
Activated carbon powder is used in water and air purification, removing impurities, odors, and chemicals through adsorption.
Batteries and Electronics.
Used as a conductive material in lithium-ion batteries, supercapacitors, and fuel cells.
Graphite powder is commonly used in electrical contacts and conductive coatings.
Pigments and Coatings.
Carbon black is used as a black pigment in inks, paints, plastics, and rubber products (like tires).
Metallurgy.
Carbon powder is used as a reducing agent in metal extraction and smelting processes.
Polishing and Lubrication.
Graphite and carbon powders are used in dry lubricants, polishing compounds, and mold release agents in various industrial processes.
Cosmetics and Pharmaceuticals.
Activated carbon powder is also used in face masks, toothpastes, and as an ingredient in detox products.
Shield tail grease is a uniform paste made with grease as the main agent and adding fiber, tackifier, filler and other additives. It mainly plays the functions of sealing, waterproofing, lubrication and anti-corrosion. Shield tail grease is divided into two types: hand-applied grease and pumped grease. Hand-applied grease is used during the launch, and pumped grease is used during the propulsion process.
Application:
1. Good adhesion;
2. Good water resistance;
3. Good water tightness;
4. It has good pumpability in a wide temperature range.
MULTIS 3 is a multipurpose grease for general lubrication under normal operating conditions and loads, formulated for lubrication of all kinds of universal applications in transport, agriculture and off road equipment, operating in wet, dusty and/or dry conditions.Lubrication of all kinds of bearings and joints when the temperature and loading conditions are normal.Pre-eminently suitable for passenger car, light truck and leisure vehicle applicationsBenefits:MULTIS 3 is miscible with most other conventional soap greases.Excellent mechanical stability avoiding ejection or loss of consistency during operation.Excellent pumpability due to the low temperature characteristics and smooth texture.Very good water resistance, even in a humid environment a sufficient lubricating film will be maintained.
Rubber Process Oil (RPO) Tailored to enhance your rubber products, our RPO is the choice for those who demand flexibility, durability, and performance. It integrates seamlessly with various rubber compounds, delivering exceptional results in tires, automotive parts, and industrial rubber goods.
Our product is a high quality product made from imported oils and additives of best quality. It has a very good life and will give the best performance under the most critical conditions. It is available in 210 ltrs. Hdpe drum/ 26 ltrs. And 50 ltrs.
Multi-brand Hydraulic Oils ISO VG 15, 32, 46, 68 and 100. Available in Drums, pails, IBCc, Bulk.
