Pressure: 0.1- 0.5 MPa; Cold Water Temperature: 8 - 20 deg C; Hot Water Temperature: 50 - 85 deg C; Cold and Hot Mixing Rate in Temperature: 5:1; Temperature Control Range: 26 - 65 deg C; Cold and Hot Water Intake: 16mm, 20mm, 32mm; Water Outlet: 16mm, 20mm, 32mm, 40mm;
Standard rating: 50A @ 125VAC / 250VAC. Temperature range: 40J - 140J Operating tolerance: 5J. Dielectric strength: 1500 vac / 1 minute. Resistance to tracking: 175VAC Type of connectors: screw terminal. Contacts endurance: B-2003m: 300 cycles. B-2003a: 1, 000 cycles.
Standard rating: 50A @ 125VAC / 250VAC. Temperature range: 40 - 140 Operating tolerance: 5. Dielectric strength: 1500 vac / 1 minute. Resistance to tracking: 175vac Type of connectors: screw terminal. Contacts endurance: B-2003M: 300 cycles. B-2003A: 1, 000 cycles. Approval: TUV, BSMI.
AUTO TOP produces the greatest number of water pumps, oil pumps and damper pulleys, thermostats for automobile in Korea. We are also manufacturing them for Japanese, American and European cars as well as Korean models. We are exporting our products to more than 50 countries in the world.
Thermostat Detailed screw type bimetal thermostat description 1:auto rest 2:cremis shell 3.6.3*0.8 terminal 4:CQC UL VDE TUV SGS Detailed brass screw bimetal thermostat description fixation of the working temperaturing reliable snap action perdurable less radio interference Technical parameters: Electrical parameters: 1)CQC,VDE,UL,CUL AC250V 50~60Hz 5A/10A/15A (Resistance load) 2)UL AC125V 50Hz 15A (Resistance load) 2.Action temperature range: 45~160 (Optional); temperature accuracy: 3.Recovery and action temperature difference: 8~100 (Optional) 4.Connection method: Insert the terminal 250 bending angle: 0~90deg optional); Insert the terminal 187(bending angle: 0~90deg optional; thickness: 0.5, 0.8mm optional) 5.Lifespan: over100,000 times 6.Electrical strength: No spark or breakdown for 1min at AC 50Hz 1800V 7.Contact resistance: less than 50m 8.Insulation resistance: less than100M Junction method: Constant-closed: the contact point disconnects when temperature rises; and contact point connects when temperature falls Constant-opened: the contact point connects when temperature rises; and contact point disconnects when temperature falls. 10.Casing protective class: IP00 11.Grounding method: Connection is made between the metal casing of the temperature controller and the metal part of the grounding device. 12.Installation method: installed for KI031 series: general moving ring, mini round moving ring, flat moving ring general aluminum cover with mounting hole, extra length aluminum cover with mounting hole Structure and application: KI-32 serial products are the temperature controllers taking bimetallic strip as the temperature-sensing unit. In case of normal operation the electrical appliance, the bimetallic strip is in a free state; the contact point is in a state of close/open. When the temperature reaches the action temperature, the bimetallic strip performs quick action generates caused by internal stress due to heating; open/close the contact point; disconnect/connect the circuit; thus, the temperature is in control. When the electrical appliance is cooled to the recovery temperature, the contact point automatically opens/closes to recover normal operation state. Widely used in electrical heating appliances like water dispenser, water heater, sandwich bread baker, dishwasher, dryer, sterilizing cupboard, micro-wave oven, electric heating coffee pot, electric cooker, refrigeratory, air-conditioner, laminator, heater of auto seat. Characteristics: Stable performance, high accuracy, small size, lightweight, high reliability, long lifespan, less interference to radio Precautions: 1.When adopting contact temperature sensing installation, the surface of the metal cover is required to be securely contacted with the installing surface of the controlled device. For ensuring the temperature sensing effect, it is required to coat thermal conductive grease or other similar thermal conductive medium on the surface of temperature sensor. 2.For reliable performance, collapse, loose or distorted top part of the cover is prohibited during installation. 3.Liquid inleakage into the controller, crackle in the casing and unauthorized change of external terminal position are prohibited. 4.When the product is used in the circuit with maximum current of 5A, the cable with copper core at section 0. 5-1mm2 is required for connection; When the product is used in the circuit with maximum current of 10A, the cable with copper core at section 0.75-1.5 mm2 is required for connection; 5.The product should be kept in a clean, dry and corrosive gas-free warehouse with good ventilation and at relative humidity below 90%, environment temperature below 40. Passed certifications :CQC UL VDE TUV SGS. according to customers' requirements.
AC250V 16A T125 10E4.
Rating: 15A, 125VAC (resistive load) Operating Temperature: 50 to 190 degrees Celsius Insulation Resistance: Over 100M ohms Dielectric Strength: Over 1,800VAC for 1 second between sensing cap and live terminals Operating Life: 100,000 cycles (at 10A 250VAC resistive load) 10,000 cycles (at 15A 250VAC resistive load).
The thermostat makes use of high sensitive dual metal sensors to control the room temperature in a certain range. It can be used in hotel, office building, supermarket, factory, hospital and vella, ect. N/a
1). The quality has been well inspected in European and US markets; 2). All kinds of models are available; 3). No MOQ required; 4). Quick delivery. Carton
