Repairing mix for converter The main raw material is high quality magnesia.By adding the modified pitch, flowing agent, sintered agent and other special additives,the product has good ductility,fast sintering under high-temperature. And it is suitable for repairing large area in the front and back of converter. It is also suitable for repairing the steel-tapping hole. Gunning mix It is made from high quality magnesia and other basic materials with reasonable particle size composition.The product has a good sintering and corrosion resistance. The construction resilience is low and easy to adhere. It is suitable for converter, electric arc furnace,ladle slag line and other parts . Ramming mix for EAF The raw material is high quality synthetic MgO-CaO-Fe-O clinker with raeasonable particle size composition. It has a good sintering strong corrosion resistance easy construction and high integrity. It can be used for the initial building and hot repairing. It is suitable for ultra-high-power electric furnace bottom furnace slpoe and other parts Gunning (coating) mix for tundish I t is made from high quality magnesia, mixed with variety of binding agents in reasonable particle size composition The product is easy to be applied in construction. It does not collapse,or crack. It has high corrosion resistance and has long service life It is easy to dissolve and not sticky after use Magnesia-calcia coating material has the function of purifying liquid steel. Dry vibratable mix for tundish Made from sintered or fused magnesia, bonded with C-bace organic or inorganic agent. It can be used after low-temperature heating, easy to operate and has long service life. The inorganic bonded product is non-pollution refractory