Powerful receiver for digital TV and Radio programs. Main features are a 300 MHz processor the 800 supports the Linux TV API have a look to HighDefinition TV on your dm 10/100MBit compatible Ethernet Interface DVI connector Plug & play tuner Brilliant OLED display SATA for use either as internal HDD 2,5 or eSATA -300 MHz MIPS Processor -Linux Operating System -OLED-Display -MPEG-2/ H.264 Hardware decoding -Tuner: DVB-S, optional: DVB-C, DVB-T -Tuner Module,Plug&Play -1xSmartcard-Reader -V.24/RS232 Interface -10/100Mbit Ethernet Interface -1xScart (RGB, FBAS or S-Video) -HDMI -2xUSB 2.0 -analog modem -S/PDIF Interface for digital bit stream out (AC-3) -64 MByte Flash, 256 MByte RAM -SATA -for use either as internal SATA HDD 2,5" -or use for extern eSATA -unlimited channel lists for TV/Radio -channel-change time 60 dB (1 kHz) Crosstalk< -65 dB Output digital: Output Level 0,5 Vss on 75 Ohm Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz S/PDIF-Output optical, Toslink Ausgang Video: Ausgangspegel FBAS 1 Vss +/- 0.3 dB an 75 Ohm Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm Teletext filter in conformity with ETS 300 472 Standard TV-Scart: Output: FBAS, RGB, S-Video Serielle Interface RS 232: Typ RS232 bidirectional Bitrate 115,2 kBit/s max. Plug Connector SUB-D-9 Function: Update of Firmware Ethernet: 10/100 MBit compatible interface Function: Update of Firmware Analoge modem: analoge modem for Internet connection SATA Interface: - for use either as internal HDD 2,5"or eSATA or internal 2,5" HDD USB 2xUSB 2.0 Host LNB power and polarisation per tuner: LNB Current 500mA max.; short-circuit-protected LNB Voltage vertical< 14V no load,>11,5V at 400mA LNB Voltage horizontal< 20V no load,> 17,3V at 400mA Count of active satellite position: DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION DiSEqC-Rotor Control Power consumption: