Length: 1333mm, 2000mm, 2666mm; Panel entering speed: 13m/min, 30m/min, 50m/min.
Wood crusher is the tiny material, like the beanpole, digs flowered, the diameter centimeter below small branch, the corn straw and so on disposable to crush the molecule the small grinder. Wood crusher can not be bigger than 80mm each kind the branch, the tree root, the slab mill culls and so on through this machining to granulated, each hourly output may amount to 350 kilograms. MODEL NUMBER GL-I GL-II productivity 400kg/h 600kg/h The diameter of the material(mm) í_íT10 í_íT30-50 Motor power 7.5kw 11kw Net weight 500kg 650kg Out size(mm) 1250*800*900. Wood package.
Sawdust drying machine merit is the direct heating, dries quickly, may fold the installment, saves the space. Its principle is lets the moist raw material and the high temperature air current mix walks, separates finally through the separator the moisture from raw material. MODEL NUMBER GL-H1 GL-H2 productivity 600-800kg/h 1000-1400kg/h The temperature of the heating air 180íµ-250íµ 180íµ-250íµ Motor power 5.5kw 7.5kw weight 1600kg 2600kg Size of the machine 15*1.0*2.0m 12*2*2.4m. wood package.
Flat die feed pellet machine is designed for small farms, small and medium sized pellet feed processing equipment. And be able to process grass industry, straw particles and particles of inorganic fertilizer. Crude fiber granulator such as: sawdust, rice husk, cotton stalks, cottonseed skins, weeds and other crop residues, waste, plant waste, low bonding, it is difficult molding material granulating. Model Capacity (kg/h) Motor Dia of flat platform Out size GLKL-120A 75-100 6-8HP 120mm 87*44*73 GLKL-150A 100-150 8-12HP 150mm GLKL-200A 250-350 15-18HP 200mm GLKL-230A 300-400 22-24HP 230mm 134*56*92 GLKL-120 75-100 2.2kw/h 120mm 71*39*61 GLKL-150 90-120 3kw/h 150mm 75*35*65 GLKL-200 200-300 7.5kw/h 200mm 100*43*95 GLKL-230 300-400 11kw/h 230mm 114*54*93 CLKL-260 400-600 15kw/h 260mm 122*52*107 GLKL-300 600-800 22kw/h 300mm 128*60*105 GLKL-400 1000-1100 30kw/h 400mm 147*60*115. Wood package.
The animail feedstuff crushing and mixing machine is used to first crushing the grains then mixing the powders for animal feed. The excellence of the animail feedstuff crushing and mixing machine: NO.1 Mixed high-speed smash NO.2 no dust and low noise NO.3 Failure rate is low, the motor difficult to burn. Model GL-S500 GL-S800 GL-S1000 GL-S2000 Motor ofcrusher(kw) 5.5 7.5 7.5 11 Motor of Mixer(kw) 3 3 4 4 Productivity(kw/h) 500-1000 800-1000 1500-2000 3000-4000 Dimensions(cm) 200*105*230 215*116*260 220*130*290 270*170*306. Wood package.
Technical & functions: Cutting capacity Miter Capacity[right/left] 45o/45o Cutting capacity at 90o/90o (W*H) 90 *85mm Cutting capacity at 90o/90o (W*H) 150 *35mm Cutting capacity at 45o/90o (W*H) 60 * 80mm Cutting capacity at 45o/90o (W*H) 110 * 20mm Cutting capacity at 90o/45o (W*H) 90 * 55mm Cutting capacity at 90o/45o (W*H) 155 * 20mm Cutting capacity at 45o/45o(W*H) 100 * 20mm Max Depth of Cut [Saws] 85mm. Technical data: Max Diameter 255mm Blade Bore 25.4 mm Rated Input Power 1600W No-Load Speed 5300r/min Rated Frequency 50/60Hz Rated Voltage 220~240V. 1pcs each Carton Carton Size 50.5*41*42.5cm STD 20 332pcs STD 40 691pcs STD 40 HQ 794pcs 2010-CATALOGUE
Sawdust machine is designed and developed according to industrial requirement. It belongs to wood crushing and pulverizing equipment. It has a reasonable design and stable structure. It is a safe, endurable, efficient sawdust making machine. Besides, it is highly eco-friendly and saves energy in order to reduce the production cost. Wood grinder machine uses blade cutting and high speed airflow crushing to reduce the wood into sawdust. While the blades inside are cutting with a high rotating speed, the rotor generates strong airflow which rotates at the same direction as rotor. As the blades rotate and cut, the airflow crushes the material at the same time. That way, the sawdust making efficiency can be increased greatly. Xzcfsd
Wood chipper. Sdfsda
Applicable Materials: MDF/ wood/ wave panel/aluminum composite panel/ inscribed wooden slip /PVC board etc. Applicable Industries: Wood Furniture(wood door/ folding screen/ artificial fans & windows/ game cabinet/ mahjong table/ computer desk etc) large scale architecture mould/ aerospace wood mould/ automotive foam mould/ musical instrument tri-dimensional engraving/ decoration/upholster(handwriting\ art frame)and other related industries. Features: 1. Precision mould casting, high rigidity and small accumulated error. 2. Large power spindle cuts easily and quickly. 3. High speed (curve and straight line shares same speed, and curve line is more smooth. ), high efficiency. Running speed is more than 14 m/min. And 1325M\1530M can even reach to 35 m/min. 4. Two motor-driver with distinctive double rack transmission, making it work steadily for a long time. 5. Continue to engrave after point-break and bits/knife-breaking. Hold more than 9 points. 6. Professional engraving software. Such as CorelDraw, Type3, Artcam, Castmate, Proe, Artcut and other CAD/CAM software. Technical Specifications: Model: BX-1325/1530/1325M/1530M X/Y axis working area: 1300*2500/1500*30000mm Z axis working area: 120mm Platform Size: 1500*3100/1700*3600mm Max. Working Speed: 14/35m/min Max. Engraving Speed: 12/20m/min Type of Clamp: Vacuum (1325M/1530M) Interface: USB (1325M/1530M) Resolution: 0.01/0.03mm Repositioning Accuracy: 0.05mm Command: G Code*. U00*. Mmg*. Plt Software Surroundings: Windows98/2000/XP Power: AC220V/50Hz Spindle Power: 1.5/2.2/3/4.5Kw Spindle Speed: 0-24000rpm Work Mode: Stepper. Accessories Chosen By Customer: Large Power Spindle/ Imported Spindle/ Multi Spindle/ DSP Handle With USB Interface/ Vacuum System/ Servo System etc.
We would like to offer you following used lathes: 1) Vertical lathe kolomna 1540F1 (max.Dia 4000mm), price 200.000 USD. 2) Vertical lathe Sedin 1l532 (max.Dia 3150mm), price 100.000 USD .
We would like to offer you following used lathes: 1.Heavy duty lathe kramatorsk 1a660 (1250x6300mm), price 45.000 USD 2.Heavy duty lathe kramatorsk 1a665 (1600x12000mm), price 160.000 euro.
(1). The portable edge bander can finish wooden edge frames at straight edge, inside the arc, outside the arc, curve and circle, the radius of the inside arc above 15mm Machine size:400+280+380mm, gross weight:19.3kg
Wood brushing machine Main uses: Solid wood grain highlighting, with steel and nylon wire brushes, Wpc decking profile brushing, with steel and nylon wire brushes Wood profile polishing and denibbing, with sandpapers Machine features: Centralized control panel Steel wire brush or roller, nylon brush rollers or vertical wire disc, work together or separately Fine adjustment and digital display of table openings Hold-down rollers and feed-in table height adjustment Rotate speed of the brush and feed speed controlled by invertor Modular configuration Easy exchange of brushes Max. Working width include: 600mm; 800mm;1000mm;1300mm;1600mm or others Working length: more than 400 mm; Wood case or paper film
This dry type grinding is designed in order to achieve the no.3, no.4, hairline finishing with abrasive belts for metal sheet surfaces grinding or finishing or brushing or polishing (as stainless steel sheet aluminum sheet or coil). Single or multiple abrasive belts of variable grain patterns adaptable. This kind of machine always work with conveyor bed, precisely up or down on 4 pneumatic spindles, dust extraction funnels. Max. Working width include: 600mm;800mm;1000mm;1300mm or others Working length: more than 400mm; working thickness: 0.5-30mm; feed speed: 5-30m/min The processing of this machine is: Metal sheet--conveyor bed---grinding machine---conveyors---film laminating machine(laminate protective film on the metal sheet in order to protective the sheet )--metal sheet. This kind of machine include msrr( two abrasive belt ), msrrr(3 abrasive belt ), msrrb(2 abrasive belt and 1scrotch-brite rollers ) three models. Depend on your sheet roughness and effect you required. You can choice different model.. 16 of the ms16rr meaning max width is 1600mm. 13 of ms13rr meaning max width is 1300mm. Technical parameter Machine modelms16rrms16rrrms16rrb Work piecethickness0.5-30mm0.5-30mm0.5-30mm Maxlength320mm320mm320mm Width40-1600mm40-1600mm40-1600mm Abrasive belt linear speedabout 14 m/sabout 14 m/sabout 14 m/s Size(wxp)1630x1900mm1630x1900mm1630x1900mm Conveyor beltfeed speed5-20m/min5-20m/min5-20m/min Size(wxp)about 1600x3350mmabout 1600x4330mmabout 1600x4330mm Motor (kw)no.1 main motor30.0kw30.0kw for no.4 2.5kw for hl optional30.0kw No.2 main motor30.0kw30.0kw No.3 main motor15.0kw Feed-in motor4.04.04.0 Lifting motor0.370.370.37 Airconsumption volume about 0.66m3/minabout 0.76m3/minabout 0.76m3/min Working pressure0.55mpa0.55mpa0.55mpa Dust exactorwind volume6500 m3/h8500 m3/h8500 m3/h Pressureabout 2300paabout 2300paabout 2300pa Wind speed25-30m/s25-30m/s25-30m/s Export standard
Product detail: í= used for plastic and aluminum profile cutting angel between -45 degree, 45 degree, 90 degree. Feeding in a liner way ensured ití»s stability. Machine guide adopted imported linear bearing system, ensured high cutting precision. Main technique parameter: Voltage:380v~415v/ 50hz Motor power: 3kw Air pressure:0.5~0.8mpa Cutting length:450~3500mm Cutting width:ín120mm Cutting height: ín100mm Saw balde feeding speed:0~3m/min Saw balde size:ºµ450*4.4*ºµ30*z120 Overall dimension:4000*1000*1400mm Weight:1500kgs .
The bandsaw horizontal vol. 700x 1 ", which has three forward speeds, ensuring a better machine performance and provide greater output, the distance between the teeth of 19 mm and cut of 1.7 mm. It has superior traction rollers pressed synchronized with the speed of the treadmill to ensure efficiency in the conduct of the wood, and the stability of the part to be processed. Using a saw blade with a thickness of 0.9mm, working with a rotation of 1.065rpm, the horizontal band saw vol 700mm x 1" guarantees the quality of the cut, the lower index of sawdust and uniformity of the gauge. Dimensions of wood: Minimum path length---------------------5mm Maximum height of the block-------------400mm Minimum length--------------------------1.000mm Maximum length--------------------------3.000mm Equipament: Ash-----------------------------------700mmx1" Main engine---------------------------20cv 2p trif Engine feed---------------------------3cv 4p Maximum width being cut---------------220mm Total length--------------------------8.000mm Width---------------------------------2.000mm Blade: Saw blade----------------------1.1/4"x0.9x4.220mm Approximate cut----------------1.7mm Feed rate----------------------17-22-32mt/lin/min
Improving the manufacture of saws tapes, vantec launches in the market of woodworking machines bandsaw horizontal ash tape 700mm x 1 ". With rocker system. The function of the rocker is a counterweight in the mountains shake in the steering wheel, ensuring greater durability of the mountain and preventing the breakdown of that without interfering with the stability of the cut. The dimensions of the width of cut and also the width of the trough will depend on the customer's needs, and 160mm to 220mm, is optional inverter frequency by varying the speed from 0 to 38 mt.Lin / min. As required. The horizontal band saw 700mm x 1 "has three forward speeds, ensuring better performance of the machine, as well as providing a higher yield, distance between the teeth of 19mm and 1.7mm cut It has superior traction rollers pressed synchronized with the speed of the treadmill to ensure efficiency in the conduct of timber and established part to be processed. Using a saw blade with a thickness of 0.9mm, working with a rotation of 1.065rpm, bandsaw vol horizontal 700rpm x 1 "guarantees the quality of the cut, the lowest rate of sawdust and uniformity of the gauge. Dimensions of wood: Minimum path length---------------------5mm Maximum height of the block-----------400mm Minimum length---------------------------400mm Maximum length---------------------------3.000mm Equipament: Ash------------------------------------------700mmx1" Main engine--------------------------------20cv 2p trif Engine feed---------------------------------3cv 4p Maximum width being cut---------------220mm/350mm Total length---------------------------------5.500mm Width----------------------------------------2.000mm Blade: Saw blade------------------------------------1.1/4"x0.9x4.220mm Approximate cut----------------------------1.7mm Feed rate-------------------------------------17-22-32mt/lin/min Average production head------------------198m2/h
Improving the manufacture of saws tapes, vantec launches in the market of woodworking machines bandsaw horizontal ash tape 700mm x 1 ". With rocker system. The function of the rocker is a counterweight in the mountains shake in the steering wheel, ensuring greater durability of the mountain and preventing the breakdown of that without interfering with the stability of the cut. The dimensions of the width of cut and also the width of the trough will depend on the customer's needs, and 160mm to 220mm, is optional inverter frequency by varying the speed from 0 to 38 mt.Lin / min. As required. The horizontal band saw 700mm x 1 "has three forward speeds, ensuring better performance of the machine, as well as providing a higher yield, distance between the teeth of 19mm and 1.7mm cut It has superior traction rollers pressed synchronized with the speed of the treadmill to ensure efficiency in the conduct of timber and established part to be processed. Using a saw blade with a thickness of 0.9mm, working with a rotation of 1.065rpm, bandsaw vol horizontal 700rpm x 1 "guarantees the quality of the cut, the lowest rate of sawdust and uniformity of the gauge. Dimensions of wood: Minimum path length---------------------5mm Maximum height of the block-----------400mm Minimum length---------------------------400mm Maximum length---------------------------3.000mm Equipament: Ash------------------------------------------700mmx1" Main engine--------------------------------20cv 2p trif Engine feed---------------------------------3cv 4p Maximum width being cut---------------220mm/350mm Total length---------------------------------5.500mm Width----------------------------------------2.000mm Blade: Saw blade------------------------------------1.1/4"x0.9x4.220mm Approximate cut----------------------------1.7mm Feed rate-------------------------------------17-22-32mt/lin/min Average production head------------------198m2/h
In order to bring more and more advantages and provide equipment to increase their profits on cost-efficient, the vantec presents saw tape vol horizontal 800mm x 1 ". Equipped with hydro-pneumatic tensioner, which intends to allow the saw according to their characteristics, keeping the tension constant and unchanged, has a compensating valve to correct excesses in abnormal states, and also has the function to facilitate the replacement of the saw. With feeding belt loop of steel, and frequency inverter drive panel. The fact that the machine has 800mm wheels provides better performance. His super reinforced structure ensures maximum shelf-life and results that will surprise you. Dimensions of wood: 1cab Minimum path length-------------------5mm Maximum height of the block-----------315mm Minimum length------------------------1.000mm Maximum length------------------------3.000mm Equipament: Main engine---------------------------25cv 4p trif Engine feed---------------------------3cv 4p Maximum width being cut---------------220mm/350mm Total length--------------------------5.157mm Width---------------------------------2.422mm Blade: Saw blade------------------1.1/4" x 0.9 x 5.330mm Approximate cut------------1.7mm Feed rate------------------0 a 45mt/lin/min Dimensions of wood: 2 cab Minimum path length-------------------5mm Maximum height of the block-----------315mm Minimum length------------------------1.000mm Maximum length------------------------3.000mm
Dimension of sliding table 3200ß370mm Cross cut capacity 3200mm Width of cut between saw blade and rip fence 1250mm Saw bladeª¦ 300mm(ª¦250-ª¦300) Height of cutª¦300mm 80mm Height of cut with saw blade ª¦300mm at 45 55mm Speed of main saw blade 4000/6000rpm Spindle diameter 30mm Tilting saw blade 0-45 Main motor 4kw Scoring saw blade 120mm Speed of scoring saw blade 8000rpm Spindle of scoring saw 20mm Scoring motor 0.75kw Weight 700kg Overall dimensions 3250ß3050ß900mm
