QQ :2851195456 Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
Gas Engine Basics The image below shows the basics of a stationary gas engine and generator used for the production of power. It consists of four main components â?? the engine which is fueled by different gases. Once the gas is burnt in the cylinders of the engine, the force turns a crank shaft within the engine. The crank shaft turns an alternator which results in the generation of electricity. Heat from the combustion process is released from the cylinders This must be either recovered and used in a combined heat and power configuration or dissipated via dump radiators located close to the engine. Finally and importantly there are advanced control systems to facilitate robust performance of the generator. Power Production GE Jenbacher gas engines can be configured to produce: Electricity only (base-load generation) Electricity & heat (cogeneration / combined heat & power â?? CHP) Electricity, heat and cooling water (trigeneration / combined heat, power & cooling â?? CCHP) Electricity, heat, cooling and high-grade carbon dioxide (quadgeneration) Electricity, heat and high grade carbon dioxide (greenhouse cogeneration) Gas engines are typically applied as stationary continuous generation units but can also operate as peaking plants & in greenhouses to meet fluctuations in local electricity demand. They can produce electricity in parallel with the local electricity grid, in island mode operation, or for power generation in remote areas. Packing & Delivery 1)100% full New! - Original Factory Seal ! 2)Warranty: 12 months! 3)Package: Original packing with cartons. 4)Delivery time: Shipped in 3 days after payment 5)ship to you via DHL/TNT/UPS/EMS/Fedex. 6) All the goods will be tested before shipment. Type of payment: T/T 100% Payment in Advance Refound or Replacement: We accept return back itmes if the goods still remain in their original condition on the warranty time mailto:unity@mvme.cn Our Partner We have large of inventory for our company's advantage products some of kinds of DCS/PLC parts as below 1) IS200/DS200 series Excitation system card 2)IC693/IC695/IC697/IC698/IC200/IC660/IC670 CPU module,Communication module, Analog Digital module Ericsson KRC12110/3 TRX 30-Watt Transceiver Wireless/Cellul?ar Test Module Card Pioneer DVR-110D CD/DVD-R/RW Internal IDE Burner Drive VA Varian Vacuum Products 956 Handheld Remote Control Controller Module Varian SD SD-1400 Two/Dual-Stage Rotary Vane Mechanical Vacuum Pump 3HP 43CFM
. 6 Months warranty on used units, 12 Months warranty on new units . T/T 100% Payment in Advance . Order before 14.00 CET and we normally ship the same day . Worldwide shipping . Contact us for a quote Description The rich function block library includes several types of control loops, including advanced control and auto- tune capabilities as well as integration for ABB drives and motors. The controller communication by means of Ethernet includes on board RNRP redundancy along with a broad set of communication modules to connect to third-party devices. A superior redundancy concept allows for fast switch-over times and topologically separated CPU-modules. Several CPU modules are available, varying in terms of processing power, memory size and redundancy support. Priority controlled, time-based tasks allow the highest stability in even complex control tasks AC 800M controller A Programmable Automation Controller, designed to achieve high availability for control applications in the process industry. Article no.: 3BSE003645R1 Product category: PLCs - ABB - Advant Controller 410 - ABB 3BSE003645R1 PM154 (3BSE003645R1) All used units are powered up and tested as far as we have knowledge to. We are unable to fully test some advanced units, but most is fully tested. Benefits �Full modularity and flexibility for all environments for future expansion of control applications �Compact Control Builder software offers a wide range of powerful control solutions and reusable libraries for efficient configuration �Robust design and redundancy options in all critical areas of the controller and its components eliminates single-point failures and secures maximum availability �Supports a broad range of I/O products that can be integrated into a spectrum of industrial processing applications mailto:unity@mvme.cn Astec Cisco AA22120 Power Supply Unit for 3745 Router Chassis 34-1895-01 Symbol AP-4131-1050-WW Spectrum24 High Rate 11Mbps WIFI Wireless Access Point Fujitsu N010-0554-T041 4-Wire 6.4" Touch Screen Panel Novellus Systems 03-053424 Mod Cont DC/DC Converter+Fujit?su MPE3064ATK IDE HDD
INTRODUCTION PRODUCTS SUM Electronics is a professional battery solution manufacturer and supplier, our major market is in Europe and China. Our motto: Artisan Spirit, Refine Production,unchangeable Credibility, Sincerest Service. High quality, good performance and secure rechargeable 48V lithium-ion battery pack. Application fields: Wireless products. Instrumentation, robotic, Medical, business and Security equipment; Energy storage and emergency backup power systems, etc. I/ Products specs Dimensions 310*210*120mm Capacity 6Ah Voltage 48V Certifications CE,ROHS,UL,FCC,KC,IEC62133,CQC,UN38.3,MSDS II/ safety performance testing 1. High-low temperature pressure: Change the temperature between 80±5 and 0, and simulate pressure of 5 ~ 7T while the battery is molded under extreme temperature and pressure conditions. 2. Temperature cycle: The battery should be placed separately at least 6h at the temperature of (75±2) and (-40±2) with a 30min free temperature adjustment. Put the testing battery in (20±5) after thermal shock ten times and evaluate the sealing integrity and internal electric connection under a rapidly changing temperature condition. 3. Extrusion: A round bar weighting around 9.1kgs with a diameter of 15.8 mm is placed to fall on the battery surface from 61±2.5cm of height. An evaluation is done to assess situations that may cause internal short circuits, such as possible impacts or crushing during shipping. 4. Needle test: Using a press machine with a steel needle of 3-3.5mm diameter, the battery is punched at 10-40mm/s speed and there should be no smoke, no fire, and no explosion after pulling it out. This test helps evaluate an internal short circuit condition in the battery 5. Vibration test: The battery is fixed on a vibrating table, within 15min from 7Hz ~ 200Hz ~ 7Hz to complete a logarithmic frequency sweep sinusoidal vibration, 3h within three-dimensional direction to complete 12 vibrations, no leakage, no exhaust, no disintegration, no rupture, no fire should be observed. The vibration simulation is to evaluate the risks during transportation. 6. Drop test: The battery is dropped from a falling height of 1.5m free fall on the concrete, the battery should not catch fire, nor be short circuited & no leakage should be observed; Usage of extreme safety is required while testing all batteries. Packaging: Only the qualified batteries will be packaged for delivery.
INTRODUCTION PRODUCTS SUM Electronics is a professional battery solution manufacturer and supplier, our major market is in Europe and China. Our motto: Artisan Spirit, Refine Production, unchangeable Credibility, Sincerest Service. High quality, good performance, and secure rechargeable 51.2V lithium-ion battery pack. Application fields: Instrumentation, robotic, Medical, business and Security equipment; wireless products, Energy storage and emergency backup power systems, etc. I/ Products specs Dimensions 640*490*130mm Capacity 60Ah Voltage 51.2V Certifications CE,ROHS,UL,FCC,KC,IEC62133,CQC,UN38.3,MSDS III/ safety performance testing 1. High-low temperature pressure: Change the temperature between 80±5 and 0, and simulate the pressure of 5 ~ 7T while the battery is molded under extreme temperature and pressure conditions. 2. Temperature cycle: The battery should be placed separately at least 6h at the temperature of (75±2) and (-40±2) with a 30min free temperature adjustment. Put the testing battery in (20±5) after thermal shock ten times and evaluate the sealing integrity and internal electric connection under a rapidly changing temperature condition. 3. Extrusion: A round bar weighting around 9.1kgs with a diameter of 15.8 mm is placed to fall on the battery surface from 61±2.5cm of height. An evaluation is done to assess situations that may cause internal short circuits, such as possible impacts or crushing during shipping. 4. Needle test: Using a press machine with a steel needle of 3-3.5mm diameter, the battery is punched at 10-40mm/s speed and there should be no smoke, no fire, and no explosion after pulling it out. This test helps evaluate an internal short circuit condition in the battery 5. Vibration test: The battery is fixed on a vibrating table, within 15min from 7Hz ~ 200Hz ~ 7Hz to complete a logarithmic frequency sweep sinusoidal vibration, 3h within three-dimensional direction to complete 12 vibrations, no leakage, no exhaust, no disintegration, no rupture, no fire should be observed. The vibration simulation is to evaluate the risks during transportation. 6. Drop test: The battery is dropped from a falling height of 1.5m free fall on the concrete, the battery should not catch fire, nor be short-circuited & no leakage should be observed; Usage of extreme safety is required while testing all batteries. Packaging: Only the qualified batteries will be packaged for delivery.
Outdoor Waterproof IP65 Starry Christmas Laser lights motion laser projector for outside New Year Party decoration NO Cold!On Normal Work at Winter. NO Mess!Easy to Operate. NO Tools!By hand to change the slides. NO Hanging!Insert the ground and install at wall. Starry Christmas Laser Lights offers a powerful projector that can meet all your lighting needs and help you get rid of all the unattractive lights that are not worth it. It can do almost anything that other projectors do for money but will look better with stylish aluminum. This Starry Christmas Laser Lights has excellent coverage space of 3,000 feet from a distance of about 30 feet. It should be able to decorate the landscape perfectly and recommend Christmas because it is red and green. To control the motion mode or the timer, the wireless remote control can be played. With the help of colors can be mixed or projected into a single mode. Easy to use The projector is a powerful feature. You can project thousands of stars on walls, ceiling or lawn. The Christmas laser sensor can be turned on and off automatically and save energy. This is a more effective alternative than the average string. The projector and power adapter are waterproof, so you do not have to worry about outdoor conditions. Whether you choose Starry Starry, it will give you a promising product wherever you are, which will give you access to the true Christmas atmosphere so that everyone, your family, friends and neighbors can enjoy it. Material ABS house,Aluminium alloy parts LED color red green blue white colors laser color laser red and green laser grade Laser diode is CLASS 3R,Laser dots is ClassII play mode remote control,AUTO,Timer laser power red 660nm 100mw;green 532nm 30mw suitable temperature -20 ---+40 applications garde,yard,outdoor,Christmas season certificates CE,ROHS,FDA key words: Dancing Santa's Laser Motion Cartoon Mr Christmas Laser Lights Projector With Laser Dots Star Effect Lights,Dancing Santa's Laser lights,laser dots star effect lights,cartoon laser lights,motion laser lights,Mr Christmas laser lights Describe item Describe content Describe item Describe content laser power 100mw,red 50mw green key words Outdoor Waterproof IP65 Starry Christmas Laser lights motion laser projector for outside New Year Party decoration,Dancing Santa Laser Lights Projector,Moving Santa Laser Lights projector,Cartoon Santa Laser Lights Projector, Shower Star Effect Laser Lights lights Color red,green Suitable temperature laser wavelength red 660nm,green 532nm Certificates CE,FDA,RoSH,FCC
Small Pixel P2.5 Big LED Wall 1.Main Features And Functions 1.1 A Variety of Installation Methods P2.5 small pitch LED high-definition screen, with a variety of installation, can support the arc installation, floor installation, different forms of installation, embedded installation, stadiums and so on. 1.2 Rich Patterns Supports Window Stretch Mode can be ratio stretching the window,can be enlarged and can also be reduced. Multi-screen Display and Full Screen Display Mode Different input windows occupy part of the output window for display, you can also display the whole screen. PIP Display Mode Several windows can be superimposed. Support multi-channel complex signal seamless switching Support a variety of complex signal interface: VWA, DVI, HAML, DP, S-Viden, SDI and so on. 1.3 Superior Performance Strong Stability The use of high-quality components and sophisticated processing technology, effectively guarantee the death rate. Power supply signal can be double backup to ensure long-term stable operation, support 7x24-hour uninterrupted work. High Refresh Rate HD camcorder shooting pictures without stripes. The screen is stable no ripple no black screen, so that the video screen smooth and delicate, dynamic display screen image edge clear. Has a good dynamic expression, the image information accurately restored, bringing the greatest visual enjoyment. LED display response time is extremely short, the playback screen without delay, brilliant colors, and can achieve long-range wireless control, in the control screen and dynamic video, has a great advantage. High Resolution High pixel density display unit with micro pixel pitch can be infinite stitching, can support 2K, 4K resolution display. 1.4 Low Light and High Gray,with Good Consistency Brightness reduced to 20% can still show a perfect gray-scale performance, display consistency is very good. Low brightness display near-perfect gray scale, the display screen and vividness than the traditional display screen. High-intensity structure of fine-tuning technology to achieve the entire screen seamless stitching. By fine-tuning, eliminate bright lines. Point-by-point calibration technology, the entire screen brightness, color uniformity and uniformity.