Wire diameter for welded steel bar panels: ranges from 5mm to 12mm Welded bar panels opening: 50mm to 300mm Panel length: 100cm to 1200cm Panel width: 100cm to 300cm
Brief Introduction of Wire Mesh Cable Tray Systems: These are thicker and therefore stronger than apparently similar products. Cablofil incorporates a unique T welded safety edge resulting in performance comparable with traditional cable tray but with many added benefits. Features and Benefits of Wire Mesh Cable Trays: 1. Electroplated Zinc Finish 2. Fast Easy Installation 3. Mesh Design Allows Cable Exit or Entry at any point 4. Clear Cable Identification 5. Supplied in 3 Metre Lengths 6. Significant Cost Savings Compared to Standard Tray Products 7. Simple Creation of Fittings on Site 8. Wide Range of Sizes 9. Heights Shown are Internal Dimensions Manufacturing: Optional Material for wire mesh cable tray: Black Steel, Stainless Steel, Aluminium, Alloy, Fibreglass Reinforced Plastic (FRP) Mode: Top curved / Top Straight Surface Finish: Zinc-plating, Hot-dip Galvanizing (HDG), Powder-coated, Pickled & Passivated. Color: Optional Suggestions: 1). MATERIAL The choice of materials is a matter of the physical and mechanical properties produced by each, compared against the intended function, as well as the environment, in which the trays are to be installed. 2). SURFACE FINISH: A). Zinc-plating cable trays are suitable for indoor use. The place where cold zinc-plating cable trays would work should be dry, ventilated, and corrosion free. B). Hot-dip Galvanizing (HDG) cable trays are not suggested for wire mesh cable trays. C). Powder-coated cable trays should be carried out in alkali and salt corrosion free site. D). Pickled & Passivated should be used to stainless steel wire trays. Specification for power and communications cabling containment. 1). SCOPE Steel Wire Cable Tray conforming to the material and performance of this specification. 2). GENERAL A). Cable tray shall be manufactured from steel wires, welded together and bent into final shape prior to surface treatment. B). Surface Treatments: i). Electro zinc plated to BSEN 12329-2000 for interior use (level 2) ii). Hot Dipped Galvanised with between 60 and 80 microns of zinc to BS 729. iii). Stainless Steel AFNOREZ CND 17.2 (AISI 316L) C). Steel Wire Cable Tray Widths & Depths i). Cable Tray dimensions are all internal. ii). Depths of 30mm, 54mm, 80mm, 105mm & 150mm iii). Widths of 50mm, 100mm, 150mm, 200mm, 300mm, 400mm 450mm, 500mm & 600mm for depths of 30mm & 54mm. iv). Widths of 100mm, 150mm, 200mm, 300mm 400mm & 500mm for Depths of 105mm & 150mm All trays are of 3005mm long 3). SPECIFICATION a). Steel Wire Cable Tray will be produced from lateral and longitudinal sidewall steel wires, with minimum diameters of -: 4 mm for trays of widths up to 150mm 4.5 mm for trays of widths of 200mm 5.0 mm for trays of widths of 300mm 6.0 mm for trays of widths of 400mm, 450mm, 500mm and 600mm b). Trays will be manufactured with a longitudinal 'T-welded' safety edge along the top wire of the sidewall (excluding CF3050) c). Trays will be constructed with a 50mm x 100mm mesh configuration. d). All tray fittings (e.g. changes in direction, level and size) shall be constructed on site, to the manufacturers instructions, using side action bolt croppers and fastened using 25mm and 30mm counter clamps with M6 bolts and nuts, all surface treated as the tray. e). Trays will be coupled together using either a fast spring coupler or a 25mm/30mm counter clamp combination with supporting lateral splice plate on trays over 300mm width. The coupling will have the same surface finish as the tray. f). Trays shall be supported at a maximum span of 2.5m by trapeze, wall, floor or channel mounting methods and will not exceed maximum loads as specified by the manufacturer. g). All welds will be manufactured to an average minimum tensile strength of 500Kg per weld. 4. TESTS, CERTIFICATION AND CONFORMITY a). Loading and deflection characteristics of the tray should be tested and the results published in accordance with the European Standard CEI/61537. b). Suitability for the support of Cat6 data cabling should be demonstrated by way of independent test verification. c). Fire test certification should be published in accordance with the E30/E90 standard. d). Electrical continuity across a coupling should be demonstrated by means of a published test method and result. We are able to design styles in various specifications according to the drawings and/or samples by the clients. And we offer fair price, excellent quality, quick delivery, continuous improvement. We own customer satisfaction. You can trust on us that we are the leading manufacturer of cable trays. PSC
The longitudinal and transverse reinforcement bars are welded into concrete wire mesh. The concrete meshes have a more dense spacing of the steel bar. Concrete wire mesh is also named welded steel fabric. Application: concrete wire mesh is used for coal mine tunnel network protection or reinforcement, concrete pavement, bridge deck pavement, airport runway, tunnel lining, housing floor, roof, wall, floor, concrete pipes and so on. Advantages: concrete wire mesh for a new, efficient and high-quality steel reinforced concrete structures can be reinforced to reduce the installation of a large number of working hours, less than banding employment nearly approached net 50% - 70%. Concrete wire mesh can help to prevent the emergence of concrete cracks and development, roads, floors, floor welding network configuration can reduce the surface of concrete about 75 percent split.
Plain stainless steel dutch wire mesh Wire diameter from 0.10x0.071mm to 0.036x0.025mm. Other sizes not listed below also available at customers' requirements. For warp-not-fully-covered twill dutch weave, we provide wire mesh made with special twill weaving types, thus to ensure the weft wire distributed smoothly. Packing:inner water-proof paper and plastic paper, six rolls to a carton
Stainless steel woven wire mesh Materials type: stainless steel aisi316l, 316, 304l, 304 and etc. Other material types: copper (brass & bronze), nickel, inconel (incoloy) Monel, titanium, sliver Plain steel, galvanized iron and aluminum Woven type: plain weave, twilled weave, plain dutch weave, twilled dutch weave, reverse plain dutch weave as well as reverse twilled dutch weave and five-heddle. Mesh openings: 0.003 to 10mm (other specifications on request). Wire diameters: 0.010 to 1.20mm (other specifications on request). Width: up to 6mtrs. Appli cations: metal woven wire mesh can have been used widely in various fields such as: oil, chemical, mining industry, food, medicine, machine building, rubber and others. Product feature: we weave mesh with high quality of flat surface, square aperture, accurate filtering rate. In normal export packings with wooden cases outer packings
Square wire mesh Material:sus 201, sus302, 304, 304l, 316, 316l stainless steel wire, electro galvanize iron wire , hot dipped galvanized iron wire, galvanized drawn iron wire . Weaving: plain weaving Square wire mesh is made with precise struclture and uniform mesh size. It is used in industries and constructions to sieve grain powder , filter liquid and gas , and as safety guards on machinery enclosures.Also for wood strips in making wall and ceiling. According to the demand of customer.
Advantages: High rigidity The general welded mesh fencings are of an extremely rigid construction: frame, welded mesh panels and posts. Rapid installation : The posts with expand screw guarantee a fast installation. Few accessories are required. Fully framed fence panel Fully framed fence panels guarantee the fence rigidity and performance. Welded mesh panels: Different welded mesh panels The welded mesh panels are constructed out of frame, fixation of the posts by means of expand screw. The welded mesh panels made out of expand metal mesh are constructed of welded the frame , fixation of the post by the meaning of expand crew. The welded mesh panels are robust and extremely attractive and decorative. The panels also are constructed of welded the frame , fixation of the post by the meaning of expand crew. Coating techniques: Panels, posts are first galvanized then adhesion coating is applied for a perfect bond with the final polyester coating. Applications: Used for road, railway, civil building , urban fence, water conservancys construction; protecting of all kinds of machines, electrical equipment, seedbed. Color : Green, red, blue, black, white, yellow, gray, etc.
Framed welded mesh fence Advantages: High rigidity The general welded mesh fencings are of an extremely rigid construction: frame, welded mesh panels and posts. Rapid installation The posts with expand screw guarantee a fast installation. Few accessories are required. Fully framed fence panel Fully framed fence panels guarantee the fence rigidity and performance. Welded mesh panels Different welded mesh panels The welded mesh panels are constructed out of frame, fixation of the posts by means of expand screw. The welded mesh panels made out of expand metal mesh are constructed of welded the frame , fixation of the post by the meaning of expand crew. The welded mesh panels are robust and extremely attractive and decorative. The panels also are constructed of welded the frame , fixation of the post by the meaning of expand crew. Coating techniques: Panels, posts are first galvanized then adhesion coating is applied for a perfect bond with the final polyester coating. Applications: Used for road, railway, civil building , urban fence, water conservancy s construction; protecting of all kinds of machines, electrical equipment, seedbed. Color Green, red, blue, black, white, yellow, gray, etc.
Holland Wire Mesh 1.low carbon steel wire, PVC coated 2.good anticorrosion, age resisdence, beautiful shape 3.durable 4.ISO9001 Holland Wire Mesh Material: low carbon steel wire,PVC coated. Colors:moss green or grass green. Every other customs required RAL color can be delivered. Characteristics within refined design, lower prices, convenient installation, this kind of item is very favorable for the users. Using high quality steel as raw material, the welded panels body is very plain and strong resistance strength. Especially the horizontal wire is wavy. Good corrosion resistance, and aging, nice appearance, easy and quick installation. It is well suitable for a wide range of application, for example, for park, road and etc. Processing: PVC coated after welding of steel wire. Electro galvanizing, hot-dip galvanizing or PVC coating can be done separately. Specifications: 1. Nets wide: 0.5 m - 2.5 m 2. Before over(wire dia) Besmear after: 1.0-3.0(mm) 3. Aperture: 50*50 50*100(mm) Features: 1)Fence: using high quality iron road as raw material, the welded panel or rolled fence, after galvanized, PVC coat, it can resistance the corrosive and ultraviolet radiation very strongly. 2)Post: mushroom special tubes is designed refined and scientific, with plastic caps on the top of the post. The finished surface usually is galvanized and PVC coated, or alternatively. It usually uses installation method of burying additional 50cm pass panels height into the earth. Special sizes can be provided as the clients request. 3)Fastenings: the panels and posts are jointed together with the special plastic clamp or height strength steel wire clamp. They are easy to install, and very solid. Use: used in industry, agriculture municipal, traffic as the equipment for fencing, decorating, defending etc. The characteristics: good anti-corrosion, age resisdence , beautiful shape, easy and quick to install. If you are interested in our products, please contact us. Advantages: Elegant appearance, durable, easy to transport and install, filtration precision good, load with high strength. Use: Used in highway, railway, airport, residential quarters, ports, breeding, animal husbandry etc protection.
Wire Diameter:BWG12-24 Mesh:1/4",3/8",1/2",5/8",3/4",1",1-1/2",2" Width:3', 4', 5', 6'... Material: Galvanized Iron Wire. Packing in waterproof paper in rolls.
Stainless steel wire mesh Order should including: Material: 304 or 316 or other Mesh: 1-2400 Wire diameter:0.011-2mm MOQ : 300sq.M. Customize is available. Size: 100ft*4ft.
Stainless steel wire mesh Width :2', 3', 4', 1m, 1.2m, 1.3m Length :30m as standard as your demanding Material :sus201, 202, 304, 304l, 312, 316, 316l Mesh :2-500 mesh Edge treatment:barbed edge, closed edge, cut edge, weld after cut edge Wire diameter :0.02-1.5mm(20 micron -1500 micron) Properties:Long life Pleasant appearance Good flame resistance Erosion resistance Easy transportation and good mosquito-proof. Wrapped with waterproof paper and then load in carton box or wooden case. Diameter for roll of ss mesh from 10-30cm. Weight/roll:5-30kg.
Width:0.5-2m Length/roll:15-100m customer's choice is avaliable. Mesh:4*4-60*60mesh Wire diameter:0.15-1.5mm All of the above can be made as customer's choice Application:most used in window screening,industrial service in sugar,chemical,stone crusher industries,also in serving grain It can be divided into two parts according to the different methods of galvanized: hot dipped galvanized before or after weaving,electric galvanized before or after weaving End treatment:cut end,closed end,weld after cut Specifications of galvanized square hole wire mesh Mesh/inch Wire dia(mm) Aperture(mm) 6 0.8 3.43 8 0.6 2.57 10 0.5 2.04 12 0.5 1.61 16 0.4 1.18 20 0.3 0.97 30 0.23 0.62 40 0.21 0.43 50 0.19 0.32 60 0.15 0.27 Breadth:0.5-2m. Wrapped with plastic bags and bulking or wooden case.
Wire Materials: Mild steel wire, stainless steel wire, galvanized steel wire, hot-dipped zinc iron wire. Finish: electric galvanized, hot dipped galvanized , pvc coated General use: welded wire meshwith excellent corrosion resistance and oxidation resistance, is extensively used as fencing, decoration and machinery protection material in agriculture, construction, transport, mine, sports field, lawn and various industrial fields. Pallet.
Available material: good-quality low carbon steel wires, stainless steel wires and various steel wires. Weaving and characteristics: made by weaving-plating, plating-weaving, sprayed plastics and dipped plastics, etc., the product has the characteristics of extremely high corrosion resistance and oxidation resistance. Purpose: widely used for fences, decoration, mechanical protection, etc. In fields of manufacturing, agriculture, construction, communication and transportation, mining, courts, lawns, cultivation, etc. As customer requirements.
Our aluminum expanded metal is a very versatile product made from a high-quality sheet of aluminum that is uniformly slit and stretched, forming openings in the sheet that allow for the passage of light, air, heat and sound. The strands and bonds of the bindings add strength and rigidity plus resist unraveling. To meet our customers' job specifications, we custom fabricate aluminum expanded metal in standard and flattened heavy duty and light duty metal mesh types and in a variety of patterns, designs and sizes. When compared to carbon expanded metal and stainless steel expanded metal, aluminum expanded metal proves to have the highest level of workability and has good corrosion resistance. Aluminum Expanded Metal Features: * Economical * Lightweight * Durable * High strength-to-weight ratio * High electrical conductivity Aluminum Expanded Metal Applications: * Flooring * Ventilation * Architectural * Railing * Filtration * Decorative mesh.
Galvanized welded wire mesh.
Material: high quality low carbon steel wire Surface treatment: hot-dip galvanized, electro galvanized, PVC coated. Type: galvanized welded wire mesh, stainless steel welded wire mesh, PVC welded wire mesh, redrawn welded wire mesh. Size: standard roll length: 30mm, width: 0.5mm to 2.4m, special size can be customized. Packing: waterproof paper in rolls, special packing available. Colour: galvanized, PVC green, white, etc. Usage: isolation fence or safety fences for roads, railway, public buildings and other industry, agriculture, construction, mining, transportation fields and so on. Standard export packing or as request.
The blinds decoration mesh are more adopt excellent stainless steel wire (SUS304\SUS316 Above)as material. The mesh is adopt thin wire fold to steel wire rope random assemble as radial, adopt more thicker after polishing. Stainless steel stick as across warp. Flexible direction as portrait when use it , mostly used in dainty hotel, pub, shopping center,hall pub, residence, workshop and so on. As your requirement.
Materials: stainless steel wire sus302.304.316.304L.316L.310 Weaving and characteristics: Plain weaving or twill weaving,stainless wire mesh has the performances of acid-resisting , alkali-resisting,heat-resisting and wear-resisting etc. Uses:Used in mine,oil,chemical industry,food industry,pharmaceutical industry and machine producing. water-proof paper or Plastic film,pallets,as customers' request.
