Model SS-80P Spring type : Barrel and cylindrical Spring diameter : 45-60mm Waistline of spring : 55-75mm Spring wire gauge : 1.6-2.3mm Pocket spring height : 70-110,110-150,150-210 Spring height before bag : 100-130,140-170,180-250 Non-woven fabric width : 260mm-600mm Non-woven fabric thickness : 55-100g/m2 Non-woven fabric diameter : Max .500mm productivity : 47pcs/min Power requirement : 380v 3p or 220v 3p Motor power : 5.5kw Control system : PLC control and operator's panel ,can set number of springs for cutting. pocket spring machine comprises : Spring coiling device Heat treatment with cooling channel Fabric folding device Ultrasonic welding units Wire swift for reel up to 1000kg with automatic speed control and safety system. carton packing.
Technical Parameters: Material Spec: Galvanized steel sheet Thickness of Coil Sheet: 0.8 --1.2 mm Main Motor Power: 18.5kw Forming Speed: 10--12m/min Hydraulic Station Power: 3kw Quantity of Stands: About 24 groups Hydraulic Pressure: 10~12Mpa Controlling System: PLC Index Error of Length: 10m¨ª+2mm Total Weight: About 1800kg Voltage: 380V 3 phase 60Hz or at buyer's requirement. Standard Equipment of Machine: Passive uncoiler 1pc Guiding equipment 1set Rolling forming equipment 1set Main body 1set Post-cut equipment 1set Hydraulic station 1pc PLC controlling desk 1pc Supporter table 2pc Security cover (optional) 1set.
Dimension L x W x H 4,600 x 1,800 x 1,300 (mm) Production Capacity 5 - 8 (tons / hr ) (Adjustable by frequency converter) Degree of Vacuum ¡Ü - 0.092 (Mpa) Augers Nominal Diameter ¡é400 / ¡é300 (mm) Extruding Pressure 3.0 (mpa) (Main / Vacuum Pump) Motor Power 37 / 5.5 (kw) Weight ¡Ö 6000 (kg) Features of Type TL-CXJ-300B 1. Leading technology specially made for high-grade extruded wet-forming ceramic tiles and bricks, especially for making the split tiles, roofing tiles, special shaped tiles and clay bricks etc. 2. Casting-steel-structured machine body, high strength gear-box, special alloy steel augers etc., to ensure high quality and reliable of production. Wooden frame bottom support.
TL series dewatering machine is provided with unique shock-proof, featruing stable operation smooth braking, high dewatering rate easy operation. Model TL-50 TL-70 TL-100 Dewatering Capacity(kg) 50 70 100 Dewatering Rotational Speed(r/min) 786 780 770 Inner Cylinder Size(mm) Ø850*390 Ø 950*400 Ø 1000*430 Motor Power(kw) 4 5.5 7.5 Rated Voltage(v) 380 380 380 Dimension(mm) 1650*1300*850 1700*1400*900 1670*1460*1000 Total Weight(kg) 850 900 1000. Wood package.
X6.11S glass (crystal) mosaic beveling machine with dual dovetail national patent original beam before the elevator, equipped with high-precision grinding ABB motor, the unique design of the front and rear plates, so that machine superior performance, both can be processed into a little 15mmX15mm of glass mosaic and glass wide variety of more than 15mm long (to create new industry standards), the processing speed is more than 5 meters per minute, regardless of efficiency or yield have led the industry. Can be processed more than 40mm wide bevel, and five, seven, nine multi-stage bevel is KTV glass decoration, fight mirror, home decoration, furniture, sanitary ware the best choice, worthy of the name-- the real King of glass beveling machinery. 6628mmX1300mmX2540mm,4200kg.
Mechanical transmission Mechanical clamping Mechanical speed Automatic take-off and landing Automatic feed. Specificationgs z37328/9 Max.Drilling dia(mm) ¬8+31.5+ ¼S25 Distance from spindle nose to table surface(mm) 25-870 Distance between spindle axis and column surface(mm) 315-815/915 Spindle travel (mm) 130 Spindle cone 3 Spinde speeds range(r.P.M) 173f=425f=686f=960 Spinde speed step 4 Spinde feeding range(r.P.M) - Spinde feeding step 3 Rocker rotary angle 360 Main motor power(kw) 1.5 N.W/g.W(kg) 870 Overall dimensions(mm) 18007002044.
Mechanical transmission Mechanical clamping Mechanical speed Automatic take-off and landing Automatic feed. Specificationgs z3732 8/9 Max.Drilling dia(mm) ¬8+31.5+ ¼S25 Distance from spindle nose to table surface(mm) 25-870 Distance between spindle axis and column surface(mm) 315-815/915 Spindle travel (mm) 130 Spindle cone 3 Spinde speeds range(r.P.M) 173f=425f=686f=960 Spinde speed step 4 Spinde feeding range(r.P.M) - Spinde feeding step 3 Rocker rotary angle 360 Main motor power(kw) 1.5 N.W/g.W(kg) 870 Overall dimensions(mm) 1800f+700f+2044 Mechanical transmission Mechanical clamping Mechanical speed Automatic take-off and Landing Automatic feed.
Tempering control with circulation medium water Tempering units and plants with circulation medium water Our temperature control equipment using water as the circulating medium includes standard compact devices, modular multi-circulation systems and equipment and units designed specifically for individual customers. These have the following features and specifications: 1.Direct or indirect cooling 2.Electrically or steam heated 3.Water-bearing parts optional in stainless steel 4.Cooling water inlet with filter 5.Capacity of heating up to 2000 kW 6.Capacity of cooling up to 2000 kW 7.Pump power up to 200 m3/h Option: 1.Bypass-cooling 2.Different heat exchangers 3.Cooling indirect by solenoid or motor valve Application: For plastic processing, injection molding, chemical industry, rubber and tire industry. Standard wooden case
MODEL: JS-FLCD-S 1020 * Maximum Paper Size: 1020 mm wide x 720 mm long * Minimum Paper Size: 470 mm wide x 260 mm long * Drying oven temperature: 40~90 ° C * Max. Pressure: 300 kg/cm2 * E. P. C: Servo Motor E. P. C * Machine Dimension: 10, 525 mm Long x 1, 680 mm Wide x 2, 780 mm High * Heater Capacity: 73.5 kw * Machine Electric Power: 15 kw * Machine Weight: 11, 000 kgs MODEL: FLCD-S 1090 & FLCD-S 1250 available.
* HONDA / YAMAHA Gasoline engine powered, no need electricity. * 4HP 3000w powerful petrol motor * Pressure adjustabel from 0 to Max 250bar / 3650psi * Nozzle size: 0.013í¦, 0.015", 0.017", 0.019", 0.021", 0.023", 0.025, 0.027", 0.029 " (513,515,517,519, 521, 523, 525, 527, 529 airless tips etc) * Max. airless tip size: 0.031" (531 airless tip) * Paint Delivery: 4.5 L / min * For Paint viscosity: medium to high viscosity, less than 150s * Length of high pressure hose in the package:15M * Maximum length of the hose: 90 meters * Working pressure for hose: 250bar * Burst pressure for hose: 800bar. * Weight: G.W.: 55KGS; N.W.: 52KGS * Wooden case dimensions: 77x61x66cm.
* HONDA / YAMAHA Gasoline engine powered, no need electricity. * 4HP 3000w powerful petrol motor * Pressure adjustabel from 0 to Max 250bar / 3650psi * Nozzle size: 0.013í¦, 0.015", 0.017", 0.019", 0.021", 0.023", 0.025, 0.027", 0.029 " (513,515,517,519, 521, 523, 525, 527, 529 airless tips etc) * Max. airless tip size: 0.031" (531 airless tip) * Paint Delivery: 4.5 L / min * For Paint viscosity: medium to high viscosity, less than 150s * Length of high pressure hose in the package:15M * Maximum length of the hose: 90 meters * Working pressure for hose: 250bar * Burst pressure for hose: 800bar. * Weight: G.W.: 55KGS; N.W.: 52KGS * Wooden case dimensions: 77x61x66cm.
Air cooled (PM) diesel generating set Air-cooled Diesel Engine Powered 5.0/6.0/8.0/10.0kW using Kama engine with rare earth PM alternator Special Features: +. Free excitation winding, magnetizing exciter, AVR, etc. Efficiency and power factor 20% higher than common excitation generator. +. It can lead inductive load of 80% self-capacity such as UPS, air conditioner, electric motor, etc. while common generator usually under 34%. +. High reliability, simple maintenance and operation +. High power density, high voltage stability for shock load. +. Voltage fluctuation ratio less than 0.5%, waveform distortion ratio less than 2%, applicable for high electricity quality requirement, particularly bank, telecom. Army etc. 450*250*360 100KG
Air cooled (PM) gasoline generating set 1.1 Gasoline Engine Powered: 5.0/6.0 kW using Yamaha engine with rare earth PM alternator 8.0/10.0/12.5/13.5/14.0/15.0kW using Kohler engine with rare earth PM alternator Special Features: +. Free excitation winding, magnetizing exciter, AVR, etc. Efficiency and power factor 20% higher than common excitation generator. +. It can lead inductive load of 80% self-capacity such as UPS, air conditioner, electric motor, etc. while common generator usually under 34%. +. High reliability, simple maintenance and operation +. High power density, high voltage stability for shock load. +. Voltage fluctuation ratio less than 0.5%, waveform distortion ratio less than 2%, applicable for high electricity quality requirement, particularly bank, telecom. Army etc. 300*200*100 50KG
Industries Served As axises of all kinds of electrical machines, motors and electric tools. Functions and Characteristics 1.High quality. The products have a good ability in insulation and can withstand voltage reaches 6.8KV. (The highest standards at home and abroad is only 5KV) They can bear the heat up to 180 centigrade with the high mechanical strength and accurate dimension. The tolerance in both inside and outside diameter is not more or less than 0.02mm. 2.Low cost. The techniques is easy to grasp because the direct pressure has shortened the process. 3.High environmental protection. The products are both green and healthy without grinding dust of BMC. 4.The product conforms to the European standard ROHS green authentication.
1. All material of needles system is adopted the technology of Japan, and have a good stability wearable. 2. Drumless, fully computer control 3. Electro-pneumatic yarn finger and cam control 4. Stepping motor for elastic yarn and stitch cam control 5. The double picks, the double lift needle to beat a heel, can knit Y heel 6. Automatic stop by a sensor when every error occurs 7. Option of up to 2 main feeds + 5 pattern feeds (16 colour) 8. Equipped the UPS machine can keep the memory of program and the knitting action if transient electric power cut happened, when the power restored, machine can continue the knitting 9. Knitting can be operated through keyboard and LCD 10. The fog form of needle tube is even to provide oil, reducing fabric greasy dirt 1900*960*900mm
Characteristics: 1 casting of a host, the base used box structure. Precision linear rectangular guides, preload, steel and good, high accuracy. 2 ground-level precision ball screw is tightening and high precision. 3 interface use of international standards g code instructions, carving compatible software at home and abroad, for simple operation. Machine model ql-3030 X.Y working area 300*300mm Z working area 100mm Table 380*380mm Movement positioning accuracy 0.02/300mm Repeat positioning accuracy 0.01mm X, y verticality 0.025/300mm Z space to a high degree 120mm Motor power 1.5kw Spindle speed 6000-24000rpm Carving the highest rate 3000mm/min Driving system steper Fumigating wooden package
Characteristics: The machine-shaped for practical efficient carving machine. The models have rack carving machine and all the advantages of working to achieve a multiplier effect. Machine model ql1313 X.Y working area 550*2440mm Z working area >100mm Table 1550*1620mm Max. Speed 7m-17mm/min Max. Working speed 5m-15m/min Max. Feeding height 110mm Working delicacy 0.005mm Command g code*.U00*.Mmg*.Plt Surroundings for software windows98/2000/xp Power (spindle is not included) 400w Working voltage ac220v/50hz Spindle power 1.5/2.2kw Spindle rotating speed 0-24000rpm/min Drive motor stepper Fumigating wooden package
Can be custom-cylinder engraving machine specifications to meet the different needs of customers. Two-way directional guides, high positioning accuracy. 2.2kw frequency of water-cooled spindle power and great. Long life. Model ql-1200 Xy working area 1200x200mm Z working area 200mm Table size 1710x530mm Max feeding 4m-5.5m/min Work-holding 2m-3m/min Resolution 0.005mm Interface usb Command g code*.U00*.Mmg*.Plt Surroundings for software windows98/2000/xp Power(not include the spindle) 500w Working voltage ac220v/50hz Spindle power rate 2.2kw Spindle rotating speed 0-24000rpm/min Drive motor steper Fumigating wooden package
Model rl6090hs Standard laser power 60w Optional laser power 80w Laser tube co2 laser tube Engraving area 600íß900mm Maximum height of materials to engrave 550mm up and down adjustable by motor Gross power 1000w Software conversion output: artcut, photoshop Main graphic format supported: plt/dxf/bmp/ai Direct output: coreldraw, autocad, lasercut Engraver for format supported: Rotary clamp is optional and used to engrave on curve surfaces Cutting ability 80w laser tube acryllic max 20mm Engraving speed max 1000mm/s Power supply 220vía10% 50hz 110vía10% 50hz Cooling system water cooling Optional spare partsrotary clamp: used to engrave on curve surfaces Water chiller Machine size 1480íß980íß1100mm Packing size 1770íß1220íß1290mm
Model rl90120hs Standard laser power 80w Optional laser power 100w120w Laser tube co2 laser tube Engraving area 900íß1200mm Maximum height of materials to engrave 550mm up and down adjustable by motor Gross power 1100w1200w Software conversion output: artcut, photoshop Main graphic format supported: plt/dxf/bmp/ai Direct output: coreldraw, autocad, lasercut Engraver for format supported: Rotary clamp is optional and used to engrave on curve surfaces Cutting ability 80w laser tube acryllic max 20mm Engraving speed max 1000mm/s Power supply 220vía10% 50hz 110vía10% 50hz Cooling system water cooling Optional spare partsrotary clamp: used to engrave on curve surfaces Water chiller Machine size 1780íß1280íß1200mm Packing size 1980íß1480íß1380mm
